Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 14

Showing Results For: Hydraulic Hose Assemblies

Hydraulic Hose Assemblies

Hydraulic hose assemblies are essential components in hydraulic systems, comprising flexible hoses, fittings, couplings, and other essential components designed to transport hydraulic fluid under high pressure. These assemblies serve as the conveyance system for hydraulic fluids (usually oil) in machinery and equipment, including valves, motors, and cylinders. A typical hydraulic hose assembly comprises hose fittings at the end for connecting various mechanical components, ensuring consistent power and control. Hydraulic hose assemblies are typically made of durable and flexible rubber materials, making them ideal for harsh and high-pressure environments. In addition, these mechanical connectors are easy to install and allow high flow capacity in various domains.

Advantages of Hydraulic Hose Assemblies

Using hydraulic hose assemblies provides unmatchable benefits in terms of:

  • Flexibility
  • High-Pressure Capability
  • Durability
  • Versatility 
  • Ease of Installation
  • Reduced Noise and Vibration
  • Customisation
  • Leak Prevention
  • Cost-Efficiency
  • Safety
  • Performance
  • High Flow Capacity.

Materials of Hydraulic Hose Assemblies

Hydraulic hose assemblies are a set of durable, flexible, and strong hoses composed of an outer cover, reinforcement layer, and inner tubes. These assemblies are made of various materials to resist environmental conditions, wear, and withstand high pressure. Some primary materials used in hydraulic hose assemblies include:

  • The assembly’s inner tube and cover are typically made of synthetic rubber and thermoplastic materials, including nitrile, neoprene, nylon, and polyurethane.
  • The hose assembly’s reinforcement layer (providing strength to the hose) is made of steel wire or polyester.

Selection Criteria for Choosing the Best Hydraulic Hose Assembly

Choosing the best hydraulic hose assembly is crucial for ensuring the safety and efficiency of hydraulic systems. Hydraulic hoses transmit fluid under high pressure, so select the right hose assembly to prevent leaks, bursts, or other potential hazards. When selecting the hydraulic hose assembly, consider the following factors:

  • Hose Materials
  • Hose Sizes
  • Operating Temperature Range
  • Fluid Type
  • Fittings & Couplings
  • Hydraulic Hose Types
  • Reinforcement Layers
  • Compatibility
  • Pressure Ratings
  • Bend Radius
  • Hose End Connections
  • Cost & Brand.

Typical Applications of Hydraulic Hose Assemblies

Hydraulic hose assemblies are crucial components for a broad range of industries and applications, including:

  • Construction 
  • Agriculture 
  • Manufacturing
  • Material Handling
  • Industrial Machinery
  • Automotive Applications
  • Aerospace
  • Oil & Gas Industry
  • Power Generation
  • Waste Management
  • Marine Applications
  • Forestry & Mining Equipment.

FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
SAI9408, SMC
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1144.76
Rohs Verified
SAI9425, SMC
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 566.79
Enerpac
HC7206C, Enerpac
47 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 166.67
Parker
448-5916, Parker
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 26.80
5 +
£ 25.73
10 +
£ 24.65
Enerpac
HC7210, Enerpac
23 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 168.59
5 +
£ 161.86
Enerpac
HC7202E001, Enerpac
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 59.46
5 +
£ 57.08
Enerpac
HC7206, Enerpac
38 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 135.06
5 +
£ 129.66
Parker
448-6701, Parker
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 35.54
5 +
£ 34.12
10 +
£ 32.69
Hi-Force
HH1, Hi-Force
5 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 66.32
5 +
£ 64.25
10 +
£ 62.22
Enerpac
HC7203, Enerpac
11 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 126.44
5 +
£ 121.40
Hi-Force
HH3, Hi-Force
4 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 91.74
5 +
£ 88.98
10 +
£ 86.05
Parker
448-6442, Parker
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 14.25
5 +
£ 13.67
10 +
£ 13.10
Enerpac
HA7206, Enerpac
30 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 127.40
5 +
£ 122.31
Hi-Force
HH2, Hi-Force
4 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 80.69
5 +
£ 78.28
10 +
£ 75.69
Showing
1 -

New Items
New items
HH2, Hi-Force

HH2, Hi-Force

High Pressure Hydraulic Hose High quality thermoplastic hydraulic hoses, that are suitable for use with our range of hydraulic hand pumps, and high pressure cylinders, when assembling a system for various pushing, pulling, positioning and lifting applications. All hoses come supplied with 3/8" - 18NPT male hose end and ergonomically designed protective strain reliever at each end. Hose, Fittings & Accessories A range of high quality, high pressure hydraulic fittings. Manufactured from steel, they are designed for working pressures up to 700 bar. Each fitting has 3/8 - 18 NPT threaded ports and is suitable for use with our range of high pressure hydraulic components
New items
HC7206, Enerpac

HC7206, Enerpac

High Pressure Hose Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability Note Use hose 365-0125 with flat cylinder 283-0982 Hose Fittings & Accessories Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads. Note Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
New items
448-6701, Parker

448-6701, Parker

Straight / 90° Elbow Assembly High quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fittings (which eliminates an incorrectly matched insert and sleeve) and matching hoses which are assembled together using dedicated crimping machinery and dies. The crimp is affected by the bite of the serrations in the sleeve on to the hose reinforcement. The reinforcing braid is protected by the external rubber cover, which makes the fitting and hose assembly leak tight. This feature guarantees corrosion protection of the reinforcement and so prolongs the life of the assembly. For further confidence every assembly is proof pressure tested to twice working pressure. Applications include medium pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water. Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel wire reinforcing. Fittings are zinc plated mild steel. Manufacturer’s hose type is Parker Type 301 No Skive Hose, with a BSP Straight Swivel Female Each End. Temperature range is -40 to +100°C. All finished assemblies proof pressure tested to twice maximum working pressure. Temperature range -40 to +100°C. Note These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi). Standards DIN 20022 2SN, EN853-2SN, SAE 100R2 AT Standards DIN 20022 2SN; EN853-2SN; SAE 100R2 AT; ISO 1307 Warning Flexible hose assembl...
New items
HH1, Hi-Force

HH1, Hi-Force

High Pressure Hydraulic Hose High quality thermoplastic hydraulic hoses, that are suitable for use with our range of hydraulic hand pumps, and high pressure cylinders, when assembling a system for various pushing, pulling, positioning and lifting applications. All hoses come supplied with 3/8" - 18NPT male hose end and ergonomically designed protective strain reliever at each end. Hose, Fittings & Accessories A range of high quality, high pressure hydraulic fittings. Manufactured from steel, they are designed for working pressures up to 700 bar. Each fitting has 3/8 - 18 NPT threaded ports and is suitable for use with our range of high pressure hydraulic components
New items
SAI9408, SMC

SAI9408, SMC

The SMC offers a SAI series of polyurethane tubes which consist of a set of 10 transparent polyurethane tubes which are used as a connector in the hydraulic pumps. Maximum pressure 10 bar Length is 520 mm
New items
HH3, Hi-Force

HH3, Hi-Force

High Pressure Hydraulic Hose High quality thermoplastic hydraulic hoses, that are suitable for use with our range of hydraulic hand pumps, and high pressure cylinders, when assembling a system for various pushing, pulling, positioning and lifting applications. All hoses come supplied with 3/8" - 18NPT male hose end and ergonomically designed protective strain reliever at each end. Hose, Fittings & Accessories A range of high quality, high pressure hydraulic fittings. Manufactured from steel, they are designed for working pressures up to 700 bar. Each fitting has 3/8 - 18 NPT threaded ports and is suitable for use with our range of high pressure hydraulic components
New items
448-5916, Parker

448-5916, Parker

Straight/Straight Assembly High quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fittings (which eliminates an incorrectly matched insert and sleeve) and matching hoses which are assembled together using dedicated crimping machinery and dies. The crimp is affected by the bite of the serrations in the sleeve on to the hose reinforcement. The reinforcing braid is protected by the external rubber cover, which makes the fitting and hose assembly leak tight. This feature guarantees corrosion protection of the reinforcement and so prolongs the life of the assembly. For further confidence every assembly is proof pressure tested to twice working pressure. Applications include medium pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water. Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel wire reinforcing. Fittings are zinc plated mild steel. Manufacturer’s hose type is Parker Type 301 No Skive Hose, with a BSP Straight Swivel Female Each End. Temperature range is -40 to +100°C. All finished assemblies proof pressure tested to twice maximum working pressure. Temperature range -40 to +100°C. Note These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi). Standards DIN 20022 2SN, EN853-2SN, SAE 100R2 AT Standards DIN 20022 2SN; EN853-2SN; SAE 100R2 AT Warning Flexible hose assemblies are capable of transmitting fluids at high pressu...
New items
HC7206C, Enerpac

HC7206C, Enerpac

High Pressure Hose Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability Note Use hose 365-0125 with flat cylinder 283-0982 Hose Fittings & Accessories Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads. Note Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
New items
HC7202E001, Enerpac

HC7202E001, Enerpac

High Pressure Hose Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability Note Use hose 365-0125 with flat cylinder 283-0982 Hose Fittings & Accessories Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads. Note Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
New items
448-6442, Parker

448-6442, Parker

Straight / 90° Elbow Assembly High quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fittings (which eliminates an incorrectly matched insert and sleeve) and matching hoses which are assembled together using dedicated crimping machinery and dies. The crimp is affected by the bite of the serrations in the sleeve on to the hose reinforcement. The reinforcing braid is protected by the external rubber cover, which makes the fitting and hose assembly leak tight. This feature guarantees corrosion protection of the reinforcement and so prolongs the life of the assembly. For further confidence every assembly is proof pressure tested to twice working pressure. Applications include medium pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water. Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel wire reinforcing. Fittings are zinc plated mild steel. Manufacturer’s hose type is Parker Type 301 No Skive Hose, with a BSP Straight Swivel Female Each End. Temperature range is -40 to +100°C. All finished assemblies proof pressure tested to twice maximum working pressure. Temperature range -40 to +100°C. Note These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi). Standards DIN 20022 2SN, EN853-2SN, SAE 100R2 AT Standards DIN 20022 2SN; EN853-2SN; SAE 100R2 AT; ISO 1307 Warning Flexible hose assemblies are capable of transmitting fluids at high pressures. Careful attention should be given to application, material & technical specifications.
New items
HC7203, Enerpac

HC7203, Enerpac

High Pressure Hose Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability Note Use hose 365-0125 with flat cylinder 283-0982 Hose Fittings & Accessories Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads. Note Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
New items
HA7206, Enerpac

HA7206, Enerpac

High Pressure Hose Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design factor Four layer design, including 2 high strength steel wire braids Outside jacket is polyurethane, for maximum abrasion resistance Crimped on rubber strain relief for improved life and durability Note Use hose 365-0125 with flat cylinder 283-0982 Hose Fittings & Accessories Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads. Note Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Hydraulic Hose Assemblies and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Hydraulic Hose Assemblies or any other product.
This depends on the Hydraulic Hose Assemblies individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Hydraulic Hose Assemblies and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Hydraulic Hose Assemblies.
Yes. We keep updating our stock frequently and if a product like Hydraulic Hose Assemblies is not in stock then we will let you know.