No Comments found.
Featured Products
Evaluation Kit for HFBR-1505CZ and HFBR-2505CZ Fibre Optic Components The HFBR-0538Z evaluation kit, is used to evaluate Avago fibre optic devic...
Gain Block and Driver Amplifiers, Avago Technologies Gain Block and Driver Amplifiers covering DC to 6 GHz...
Optocoupler, Transistor Output, Avago Technologies The DC input single and multi-channel phototransistor optocouplers are used for power sequenc...
Avago HSMx-C680 Series ChipLEDs The HSMx-C680 series, from Avago Technologies, are right angle, surface mount (SMT) Chip LEDs. They are designed...
Avago ASMT-Jx3x Series LEDs The Avago 3W Mini Power SMT LED is a high performance energy efficient light source with high thermal capacity and c...
Avago ASMT-UWB2-N Series LEDs The ASMT-UWB2-N series from Avago Technologies are a family of SMD LEDs from...
Digital Isolators, ACML-74xx Series These 4 channel high speed CMOS digital isolators, from Avago Technologies, use magnetic coupling through a...
Optocoupler, 10MBd Logic Gate, Avago Technologies 10 MBd digital optocouplers are suited for isolated commu...
Avago ASMT-QxBC-N Series LEDs The ASMT-QxBC-N series, from Avago Technologies, are Super 0.5W power LED indicators. They come in the standard PL...
Avago ASMT-Cxxx Series LEDs The ASMT-Cxxx series of right angle LEDs come in a variety of colours and with...
Optocoupler, Intelligent Power Module (IPM) Interface, Avago Technologies Avago Technologies optocouplers f...
GPS/GNSS Low-Noise Amplifier (LNA) Front-End Module, Avago Technologies A low-noise GPS/GNSS front-end module that...
Popular Categories For Broadcom
Categories For Broadcom
Popular Items
Popular items
Broadcom ACPL-847-300E DC Input Transistor Output Quad Optocoupler, Surface Mount, 16-Pin PDIP
Optocoupler, Transistor Output, Avago Technologies
The DC input single and multi-channel phototransistor optocouplers are used for power sequence controller and Input/Output interface applications.
Optocouplers, Avago Technologies
Popular items
Broadcom 615 nm Red-Orange LED, 5mm (T-1 3/4) Round Through Hole package
Avago HLMP-ED/EG/EH/EL Series LEDs
The HLMP-EDxx, HLMP-EGxx, HLMP-EHxx and HLMP-ELxx series, from Avago Technologies, are extra high brightness LED lamps. This family of precision optical performance AllnGaP LEDs offer a high light output for readability in sunlight. They are also very reliable. The AllnGaP technology enables these LEDs to provide a stable light output over long periods of time.
The HLMP-ED/EG/EH/EL series are untinted LED lamps in T-1 3/4 (5mm) packages incorporating second generation optics. This produces a well defined spatial radiation pattern at specific viewing cone angles.
Made from an optical grade epoxy, the HLMP-ED/EG/EH/EL LEDs offer high temperature and high moisture resistance performance in outdoor signal and sign applications. It contains both uv-a and uv-b inhibitors to reduce the effects of long term exposure to direct sunlight.
Suitable applications for the HLMP-ED/EG/EH/EL include; traffic management, solar power signs and commercial outdoor advertising.
Features of the HLMP-ED/EG/EH/EL LEDs:
- Viewing angle: 15°, 23°, 30°
- High luminous output
- Superior resistance to moisture
Visible Light LEDs, Avago Technologies
Popular items
Broadcom HFBR-1404Z, 160MBd Fibre Optic Transmitter 820nm, Round, 27.2 x 12.7 x 10.2mm
HFBR-14xxZ and HFBR-24xxZ Series Fibre Optic Components
Fibre Optics, Avago Technologies
Popular items
Broadcom HFBR-2412TCZ 5MBd 820nm Fibre Optic Receiver, Round, ST Connector
HFBR-14xxZ and HFBR-24xxZ Series Fibre Optic Components
Fibre Optics, Avago Technologies
Popular items
Broadcom HCPL-2531-300E DC Input Phototransistor Output Dual Optocoupler, Surface Mount, 8-Pin DIP
Optocoupler, 1MBd Transistor Output, Avago Technologies
1 MBd maximum operation transistor output optocouplers are designed for use in industrial applications.
Optocouplers, Avago Technologies
Popular items
Broadcom HDSP-2533 8 Digit Dot Matrix LED Display, 7 x 5 Dot Matrix Green 7.5 mcd 4.6mm
8 Digit Alphanumeric Display, Avago HDSP-253x Series
8-digit, 5x7 dot matrix, alphanumeric, programmable 5mm high LED displays.
X-Y stackable
128 ASCII character set
16 user-definable characters
Programmable functions
Multi-level dimming and blanking
Microprocessor bus interface
Applications include: computer peripherals, industrial instrumentation, portable data entry devices, telecommunications, test equipment.
Alphanumeric LED Displays
Popular items
Broadcom 626 nm Red LED, PLCC 2 SMD package
Avago HSMx-A10x Series LEDs
Avago Technologies HSMx-A10x series SMT LEDs in industry standard PLCC‐2 packages. These high reliability LEDs are designed to work under a wide range of environmental conditions and are equally suited to harsh interior automotive use or interior signage applications. The flat-topped emitting surface makes it easy to efficiently mate these SMT LEDs with light pipes, and the wide viewing angle at 120° is ideal for coloured back-lighting and sign illumination. The light output of these SMT LEDs is increased by the built-in reflector making them particularly well suited to use as LED pixels in interior electronic signs.
3.2 x 2.8 x 1.9 mm PLCC-2 package size
High brightness using AlGaInP and InGaN dice technologies
Wide viewing angle of 120°
Available in wide selection of colours
Visible Light LEDs, Avago Technologies
Popular items
Broadcom Incremental Encoder 4.5 → 5.5 V dc
Optical Encoders
This range of motion control optical encoders, by Avago Technologies, is available in two and three channel output options. These incremental encoders utilize optical technology for motion control. Incremental encoder devices provide position feedback for incremental counts. Where the feedback signal is always referenced to a start or home position, an incremental encoder provides a uniquely defined, relative position. Avago Technologies offer both optical reflective incremental encoders and optical transmissive incremental encoders. These devices are available as encoder modules for user integration or as complete housed or kit incremental encoders. This range of optical encoders provides accurate positioning and velocity sensing for a variety of applications.
Possible applications include:
printers
copiers
scanners
servo and stepper motor feedback systems
robotic arms
wafer-handling machines
Avago Technologies Rotary Encoders
Popular items
Broadcom, ACPL-W21L-500E DC Input CMOS Output Optocoupler, Surface Mount, 6-Pin SO
The Broadcom ACPL series single-channel SO-6 package are optically coupled logic gates. The detector IC has CMOS output stage and optical receiver input stage with built-in Schmitt trigger to provide logic-compatible waveforms, eliminating the requirement for additional waveshaping.
CMOS output
Temperature range from –40°C to +105°C
220 ns propagation delay skew
Popular items
Broadcom HFBR-1412TMZ, 5MBd Fibre Optic Transmitter 820nm, ST ST Connector, 27.2 x 12.7 x 10.2mm
HFBR-14xxZ and HFBR-24xxZ Series Fibre Optic Components
Fibre Optics, Avago Technologies
Popular items
Broadcom HCPL-0211-000E DC Input Schmitt Trigger Output Optocoupler, Through Hole, 8-Pin SOIC
Opto-Isolators 5MBd Logic-Gate, Avago Technologies
5 MBd maximum operation optocouplers with logic gate output.
Optocouplers, Avago Technologies
New Items
New items
Broadcom ACSL-6310-00TE DC Input IC Output Triple Optocoupler, Surface Mount, 16-Pin SO
Optocoupler, Logic Output, Avago Technologies
Optocouplers, Avago Technologies
New items
Broadcom AFBR-1521CZ, 40Mbps Fibre Optic Transmitter 685nm, Square, 10.2 x 18.8mm
917
The Broadcom AFBR-1521CZ analog transmitter utilizes a 650 nm LED source in a housing designed to efficiently couple into 1 mm Polymer Optical Fibre (POF). Links up to 58 meters are supported with 1 mm POF. It is designed to interoperate with Avago's AFBR-25xxCZ Receivers. The transmitter is a 4-pin device, packed in Versatile Link housing. Versatile Link components can be interlocked (N-plexed together) to minimize space and provide dual connections with the duplex connectors. Various simplex and duplex connectors, as well as POF cables, are available for Versatile Link components.
Data transmission at signal rates from DC up to 5 MBd
Up to 58 meters distance with 1 mm Plastic Optical Fibre (POF)
Up to 500 meters distance with 200μm polymer cladding silica (PCS) fibre
Operating temperature range of -40° C to +95° C
Compatible with Avagos Versatile Link family of connectors, for easy termination of fibre
New items
Broadcom HCPL-2232-300E DC Input Logic Gate Output Dual Optocoupler, Surface Mount, 8-Pin PDIP
Opto-Isolators 5MBd Logic-Gate, Avago Technologies
5 MBd maximum operation optocouplers with logic gate output.
Optocouplers, Avago Technologies
New items
Broadcom 0.6 A Solid State Relay, PCB Mount MOSFET, 60 V Maximum Load
Solid State Relay (Photo MOSFET), ASSR Series, Avago Technologies
The Avago Technologies Photo MOSFET Solid State Relay family consists of an infrared light-emitting diode (LED) and the detector which consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs.
Optocouplers, Avago Technologies
New items
Broadcom ACPL-P302-000E DC Input Transistor Output Optocoupler, Surface Mount, 6-Pin SO
Isolated Gate Driver Optocouplers, Avago Technologies
The Avago Technologies optically isolated gate drive devices are optimised for driving IGBT and Power MOSFET transistors. The optocouplers exhibit rail-to-rail output, fast gate switching speed, high Common Mode Rejection (CMR) and reinforced insulation. Avago Technologies R2Coupler™ isolation products provide the reinforced insulation and reliability needed for critical automotive and high temperature applications.
The isolated gate driver optocouplers are ideal for use in motor control and power conversion applications. This is a solution where the logic signals is isolated and protected from high voltages.
Optocouplers, Avago Technologies
New items
Broadcom 626 nm Red LED, 1608 (0603) Clear SMD package
Avago HSMx-C120 Series LEDs
The HSMx-C120 series, from Avago Technologies, are surface mount (SMT) Chip LEDs. They are in a smaller right angle package with industry standard 1.6 x 0.6 x 1.0 mm.
The HSMx-C120 chip LEDs are designed in an industry standard package for ease of handling and use. Various different LED colours are available in nine compact, single colour packages. Suitable applications for the HSMx-C120 Chip LEDs include; keypad backlighting, push-button backlighting, LCD backlighting, symbol backlighting and front panel indicators.
Features of the HSMx-C120 series:
- Compact package
- Industry standard 0603 footprint
- Viewing angle: 155°
- Compatible with IR solder
- Diffused optics
- Operating temperature range of -30°C to +85°C
- Various colours available
Visible Light LEDs, Avago Technologies
New items
Broadcom 572 / 586 nm Bi-colour Green & Yellow LED, 4-Pin 3225 (1210) SMD package
Avago HSMF-C15x Series ChipLEDs
The HSMF-C15x series of LEDs, from Avago Technologies, are bi-colour surface mount (SMT) ChipLEDs. They come in the industry standard 1210 package and are available in a variety of colours. The HSMF-C15x LED's wide viewing angle makes them ideal for use in backlighting applications. Other suitable applications for the HSMF-C15x ChipLEDs include; push-button backlighting, symbol backlighting, status indicators and front panel indicators.
Features of the HSMF-C15x ChipLEDs:
- Package dimensions: 3.2 x 2.7 x 1.1 mm
- Industry standard 1210 footprint
- Wide viewing angle: 170°
- Compatible with IR solder
- Diffused optics
- Operating temperature: -30°C to +85°C
Visible Light LEDs, Avago Technologies
New items
Broadcom HCPL-817-000E DC Input Transistor Output Optocoupler, Through Hole, 4-Pin PDIP
Optocoupler, Transistor Output, Avago Technologies
The DC input single and multi-channel phototransistor optocouplers are used for power sequence controller and Input/Output interface applications.
Optocouplers, Avago Technologies
New items
Broadcom AFBR-S20N1N256 Handheld Spectrum Analyser, 950 → 1700 nm
The Broadcom Qneo spectrometer designed for industrial integration equipped with an uncooled InGaAs sensor array, the Qneo enables professional measurement between 950 nm and 1700 nm. It features a rugged setup that combines high resistance in industrial environments and high optical performance.
High sensitivity
Low temperature dependency
Stable long-term performance
Ultra-compact design
Powerful on-board electronics
New items
Broadcom, ACPL-021L-500E CMOS Output Optocoupler, Surface Mount, 8-Pin SO8
The Broadcom ACPL-021L (single channel SO-8 package) is the first industrial 5MBd low power digital optocoupler. The detector has CMOS output stage and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, eliminating the need for additional waveshaping. The optocoupler consumes extremely low power, at maximum 1.1mA IDD current per channel across temperature. With a forward LED current as low as 1.6 mA, most microprocessors can directly drive the LED.
5 Mbd Typical Signal Rate
CMOS output
Low Supply Current, IDD < 1.1mA max
Low LED Input Drive Current, IF at 1.6mA min
New items
Broadcom HFBR-2531Z 5MBd 600nm Fibre Optic Receiver, Round Push-in (V) Connector
HFBR-0500Z Series Fibre Optic Connection
The HFBR-x5xxZ family, from Avago Technologies, form a part of the Versatile Link series. They are fibre optic link components including transmitters, receivers, connectors and cables. The HFBR-x5xxZ series are suitable solutions for problems with voltage isolation and insulation, EMI/RFI immunity or data security.
This family of devices consists of a variety of package configurations and connectors, providing a range of mechanical design solutions for the necessary application requirements.
The HFBR-x5xxZ transmitters use a 660nm LED for easy visibility. The receivers include a monolithic DC coupled, digital IC receiver with open collector Schottky output transistor.
The HFBR-x5xxZ series are ideal for a wide variety of applications including; motor controller triggering, data communications, local area networks and noise immune communication in audio and video equipment.
Features of the HFBR-x5xxZ series:
- Fibre optic components
- Enhanced digital links: dc-5 MBd
- Extended distance links: up to 120m at 40kBd
- Low current link: 6mA peak supply current
- Horizontal and vertical mounting
- Interlocking feature
- High noise immunity
- Easy connecting: simplex, duplex and latching connectors
- Flame retardant
- Compatible with standard TTL circuitry
Fibre Optics, Avago Technologies
New items
Broadcom 591 nm Amber LED, 1608 (0603) SMD package
Avago ASMT-Rx45 Series LEDs
The ASMT-Rx45 series, from Avago Technologies, are leadframe-based surface mount (SMT) ChipLEDs. They come in a thin 0.45mm package which is developed from the standard and compact 0603 platform. The ASMT-Rx45 LEDs provide a wide viewing angle to help improve visibility in sunlight.
Available in a variety of colour options, the ASMT-Rx45 LEDs are ideal for applications such as backlighting for dashboards, entertainment consoles, backlighting of industrial switches/buttons and small pixel indoor signs. Other suitable applications include interior automotive, office automations, home appliances and industrial equipment.
Features of the ASMT-Rx45 LEDs:
- Standard 0603 footprint: 1.6 x 0.8 x 0.45 mm
- Automotive qualified
- Wide viewing angle: 145°
- Operating temperature: -40°C to +100°C
Visible Light LEDs, Avago Technologies