Featured Products
Universal incremental coders Ø 58, type GI355 and GI356 The coder can be powered by a wide supply range of between 4.75 and 30 Vdc. Universal ou...
Impulse Counter Impulse counters with reset button Will count to 999999
Coder accessories Measuring wheels Connected to coders, these easily accommodate a movement in materials, speed of movement, etc. Smooth synthe...
Coder accessories Measuring wheels Connected to coders, these easily accommodate a movement in materials, speed o...
G0M2H range of SSI series output absolute encoders Optical / SSI sensor multi-turn encoders. 14-bit resolut...
FS 314 series 5-Digit preset counters Counts down pulses from a preset value and triggers a change-over contact on reaching zero (30 W / 100 VA...
Universal incremental coders Ø 58, type GI355 and GI356 The coder can be powered by a wide supply range of between 4.75 and 30 Vdc. Universal ou...
Universal coders with hollow axis, Ø 58, type GI333 The coder can be powered by a wide supply range of between 4.75 and 30 Vdc. Universal output...
Panel / DIN Rail mount Suitable for either panel or DIN rail mounting Elapsed time display Dual voltage meters, selectable by internal switch No...
BE134 timers with 1 or 2 presets Dual backlit LCD display (current value and preset value). 1 or 2 presets with 6 digits. Cycle counter to choos...
Universal incremental coders Ø 58, type GI355 and GI356 The coder can be powered by a wide supply range of between...
SSI series Ø 58 mm multi-turn absolute Encoders Resolution up to 8192 points / turn for 4096 turns SSI synchronous series outputs. Gray or binar...
Popular Categories For Baumer IVO
Popular Items
Popular items
G1355.070C315, Baumer IVO
Universal incremental coders Ø 58, type GI355 and GI356
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 10,000 pulses / turn.
A, B, Top zero and complemented output signals
Standard flange with 10 mm (GI355) axis or synchro flange with 6 mm (GI356) axis (See
RS
481-7212
.)
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency:
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Axial load:
50 N
Radial load:
60 N
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≤1000 m/s² (4 ms)
Output stage:
Totem pole, NPN or PNP, if the coder is
supplied at 10 → 30 Vdc, or
RS422 or TTL Line transmitter if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA
Low level ≤ 0.5 V for I = 20 mA
Axis length:
GI355 = 20 mm, GI356 = 9 mm
Operating temperature:
-25° → 100 °C
Relative humidity:
95%
Protection index:
IP 64
Dimensions without the axis (mm):
Ø 58, depth 50 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Popular items
F 514.650AA8B, Baumer IVO
Impulse Counter
Impulse counters with reset button
Will count to 999999
Popular items
MR291.10, Baumer IVO
Coder accessories
Measuring wheels
Connected to coders, these easily accommodate a movement in materials, speed of movement, etc.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.
Mounting bracket Z 119.017
For standard flange coders.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Mounting base Z 119.015
For synchro flange coders.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
Eccentrics Z 119006
For synchro flange coders.
3 eccentrics are needed to fit the coder.
Ref. IVO
type of
width
weight
bore
Coating
Development 20 cm
MR291.07D
Striated synthetic
12 mm
135 g
7 mm
MR291.10D
Striated synthetic
12 mm
135 g
10 mm
MR241.07D
Smooth synthetic
12 mm
135 g
7 mm
MR241.10D
Smooth synthetic
12 mm
135 g
10 mm
MR211.07A
Striated metallic
12 mm
50 g
7 mm
MR211.10A
Striated metallic
12 mm
50 g
10 mm
Development 50 cm
MR592.07D
Striated synthetic
25mm
260 g
7 mm
MR592.10D
Striated synthetic
25mm
260 g
10 mm
MR542.07D
Smooth synthetic
25mm
260 g
7 mm
MR542.10D
Smooth synthetic
25mm
260 g
10 mm
MR512.07A
Striated metallic
25mm
340 g
7 mm
MR512.10A
Striated metallic
25mm
340 g
10 mm
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Popular items
MR512.07A, Baumer IVO
Coder accessories
Measuring wheels
Connected to coders, these easily accommodate a movement in materials, speed of movement, etc.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.
Mounting bracket Z 119.017
For standard flange coders.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Mounting base Z 119.015
For synchro flange coders.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
Eccentrics Z 119006
For synchro flange coders.
3 eccentrics are needed to fit the coder.
Ref. IVO
type of
width
weight
bore
Coating
Development 20 cm
MR291.07D
Striated synthetic
12 mm
135 g
7 mm
MR291.10D
Striated synthetic
12 mm
135 g
10 mm
MR241.07D
Smooth synthetic
12 mm
135 g
7 mm
MR241.10D
Smooth synthetic
12 mm
135 g
10 mm
MR211.07A
Striated metallic
12 mm
50 g
7 mm
MR211.10A
Striated metallic
12 mm
50 g
10 mm
Development 50 cm
MR592.07D
Striated synthetic
25mm
260 g
7 mm
MR592.10D
Striated synthetic
25mm
260 g
10 mm
MR542.07D
Smooth synthetic
25mm
260 g
7 mm
MR542.10D
Smooth synthetic
25mm
260 g
10 mm
MR512.07A
Striated metallic
25mm
340 g
7 mm
MR512.10A
Striated metallic
25mm
340 g
10 mm
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Popular items
Z 119.024, Baumer IVO
G0M2H range of SSI series output absolute encoders
Optical / SSI sensor multi-turn encoders.
14-bit resolution for single-turn and 12 bit-for multi-turn.
Compact size and economical mounting.
Diagnostic functions include self-test, code changes and multi-turn sensoring.
Electrical zero positioning.
Input for counting direction.
Popular items
Z100.02A, Baumer IVO
FS 314 series 5-Digit preset counters
Counts down pulses from a preset value and triggers a change-over contact on reaching zero (30 W / 100 VA / 220 VAC 2 A max.). Contacts return to original position when the counter is reset to zero.
Press the reset button to repeat the cycle.
Speed for a pulse / pause ratio = 1:
- 20 pulses / sec. in Vdc min. 25 ms / max. unlimited
- 10 pulses / sec. in Vac min. 50 ms/max. unlimited.
Protection index IP40 and IP55 with PVC protector.
Display:
5 digits, 4 mm high
Screw fixing
Dimensions (mm) - front panel:
60 x 75 x D 81
- cut-out:
51 x 51
Connection using plug-in clips provided
Manual reset on all models
Popular items
GI355.070R006, Baumer IVO
Universal incremental coders Ø 58, type GI355 and GI356
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 10,000 pulses / turn.
A, B, Top zero and complemented output signals
Standard flange with 10 mm (GI355) axis or synchro flange with 6 mm (GI356) axis (See
RS
481-7212
.)
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency:
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Axial load:
50 N
Radial load:
60 N
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≤1000 m/s² (4 ms)
Output stage:
Totem pole, NPN or PNP, if the coder is
supplied at 10 → 30 Vdc, or
RS422 or TTL Line transmitter if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA
Low level ≤ 0.5 V for I = 20 mA
Axis length:
GI355 = 20 mm, GI356 = 9 mm
Operating temperature:
-25° → 100 °C
Relative humidity:
95%
Protection index:
IP 64
Dimensions without the axis (mm):
Ø 58, depth 50 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Popular items
G1333.M70R013, Baumer IVO
Universal coders with hollow axis, Ø 58, type GI333
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 5000 pulses / turn.
A, B, Top zero and complemented output signals.
Hollow axis coders for direct mounting onto the end of a motor shaft, bored hole Ø 12 mm H7.
Concentric tightening using ring, rotation locking using rod and stopper supplied with the coder.
Anti-rotation spring available as a option.
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency: 300 kHz max.
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≥1000 m/s² (4 ms)
Universal output stage:
Totem pole, NPN or PNP compatible if the coder is
supplied at 10 → 30 Vdc, or Line transmitter compatible with
TTL or RS422 if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA,
Low level ≤ 0.5 V for I = 20 mA
Operating temperature:
-25° → 100 °C
Relative humidity: 95%
95%
Protection index: IP64
IP 64
Dimensions (mm)
Ø 58, depth 51 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Popular items
B 148.R07XC5C, Baumer IVO
Panel / DIN Rail mount
Suitable for either panel or DIN rail mounting
Elapsed time display
Dual voltage meters, selectable by internal switch
Non-resettable
Popular items
BE134.012AX01, Baumer IVO
BE134 timers with 1 or 2 presets
Dual backlit LCD display (current value and preset value).
1 or 2 presets with 6 digits.
Cycle counter to choose the number of repeat operations.
8 digit totaliser, recording the total operating duration.
4 resolutions: 9999s99/100s; 999mn59s9/10s; 9999mn59s or 9999h59mn.
Start/stop function.
Addition or subtraction.
Supply voltage:
115 → 230 Vac
Number of digits:
2 rows of 6
Height of digits:
7 and 4 mm
Input:
Compatibility:
NPN, PNP or NAMUR
Response time:
30 ms or 100 μs
Signal voltage:
5 to 40 V
Output:
Relays:
2 N/O or N/C
Breaking capacity:
1 A / 250 V ac (150 VA)
Connection:
2 screw terminals, removable
Output:
24 Vdc 60 mA (for sensor)
Memory:
10 years with EEPROM
Protection index:
IP65 (front panel)
Dimensions (mm):
48 x 48 x 107
Panel cut-out (mm):
45 x 45
Popular items
GI356.170R023, Baumer IVO
Universal incremental coders Ø 58, type GI355 and GI356
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 10,000 pulses / turn.
A, B, Top zero and complemented output signals
Standard flange with 10 mm (GI355) axis or synchro flange with 6 mm (GI356) axis (See
RS
481-7212
.)
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency:
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Axial load:
50 N
Radial load:
60 N
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≤1000 m/s² (4 ms)
Output stage:
Totem pole, NPN or PNP, if the coder is
supplied at 10 → 30 Vdc, or
RS422 or TTL Line transmitter if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA
Low level ≤ 0.5 V for I = 20 mA
Axis length:
GI355 = 20 mm, GI356 = 9 mm
Operating temperature:
-25° → 100 °C
Relative humidity:
95%
Protection index:
IP 64
Dimensions without the axis (mm):
Ø 58, depth 50 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Popular items
Z 130.005, Baumer IVO
SSI series Ø 58 mm multi-turn absolute Encoders
Resolution up to 8192 points / turn for 4096 turns
SSI synchronous series outputs.
Gray or binary code.
Electrical zero positioning.
Standard flange with 10 mm shaft.
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.
Operating voltage:
10 → 30 Vdc
Consumption:
50mA
Switching frequency:
800 kHz max.
Load:
50 N axial, 60 N radial
Rotation speed:
mechanical = 10,000 turns/min max.
electrical = 6,000 turns/min max.
Moment of inertia:
1.45 x 10-6 kgm²
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≥ 2000 m/s² (6 ms)
Operating temperature:
-20 → +85 °C
Relative humidity:
95%
Dimensions without shaft (mm):
Ø 58 x L 67
Protection index:
IP 65
Weight:
450 g
Solid Shaft / Hollow Shaft Absolute Encoders
Application
An absolute encoder provides the ability to remember the exact position following any power interruption. There is also no need for synchronisation. This is one of the reasons why absolute encoders are used where a safety standard is required (i.e. robotics industry). Typical applications are for speed or position control circuits. The features for these encoders are:
+ A unique signal for each angular position
No need for initialisation (zero reference)
Immediately after power up or after an interruption of power the position is maintained
No need for a counter to process the signal
Construction
The electrical signal of the absolute encoder is directly related to the angle of the shaft. The mechanical angular position is sensed by non contact optical elements, therefore without wear. The output of an infrared diode is transmitted through a transparent code disc and a diaphragm. The light/dark pattern is converted to an electrical signal by an array of photo diodes. The same code occurs only once per revolution. This...
New Items
New items
F 514.650AA8B, Baumer IVO
Impulse Counter
Impulse counters with reset button
Will count to 999999
New items
Z 119.024, Baumer IVO
G0M2H range of SSI series output absolute encoders
Optical / SSI sensor multi-turn encoders.
14-bit resolution for single-turn and 12 bit-for multi-turn.
Compact size and economical mounting.
Diagnostic functions include self-test, code changes and multi-turn sensoring.
Electrical zero positioning.
Input for counting direction.
New items
Z100.02A, Baumer IVO
FS 314 series 5-Digit preset counters
Counts down pulses from a preset value and triggers a change-over contact on reaching zero (30 W / 100 VA / 220 VAC 2 A max.). Contacts return to original position when the counter is reset to zero.
Press the reset button to repeat the cycle.
Speed for a pulse / pause ratio = 1:
- 20 pulses / sec. in Vdc min. 25 ms / max. unlimited
- 10 pulses / sec. in Vac min. 50 ms/max. unlimited.
Protection index IP40 and IP55 with PVC protector.
Display:
5 digits, 4 mm high
Screw fixing
Dimensions (mm) - front panel:
60 x 75 x D 81
- cut-out:
51 x 51
Connection using plug-in clips provided
Manual reset on all models
New items
G1355.070C315, Baumer IVO
Universal incremental coders Ø 58, type GI355 and GI356
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 10,000 pulses / turn.
A, B, Top zero and complemented output signals
Standard flange with 10 mm (GI355) axis or synchro flange with 6 mm (GI356) axis (See
RS
481-7212
.)
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency:
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Axial load:
50 N
Radial load:
60 N
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≤1000 m/s² (4 ms)
Output stage:
Totem pole, NPN or PNP, if the coder is
supplied at 10 → 30 Vdc, or
RS422 or TTL Line transmitter if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA
Low level ≤ 0.5 V for I = 20 mA
Axis length:
GI355 = 20 mm, GI356 = 9 mm
Operating temperature:
-25° → 100 °C
Relative humidity:
95%
Protection index:
IP 64
Dimensions without the axis (mm):
Ø 58, depth 50 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
New items
MR512.07A, Baumer IVO
Coder accessories
Measuring wheels
Connected to coders, these easily accommodate a movement in materials, speed of movement, etc.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.
Mounting bracket Z 119.017
For standard flange coders.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Mounting base Z 119.015
For synchro flange coders.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
Eccentrics Z 119006
For synchro flange coders.
3 eccentrics are needed to fit the coder.
Ref. IVO
type of
width
weight
bore
Coating
Development 20 cm
MR291.07D
Striated synthetic
12 mm
135 g
7 mm
MR291.10D
Striated synthetic
12 mm
135 g
10 mm
MR241.07D
Smooth synthetic
12 mm
135 g
7 mm
MR241.10D
Smooth synthetic
12 mm
135 g
10 mm
MR211.07A
Striated metallic
12 mm
50 g
7 mm
MR211.10A
Striated metallic
12 mm
50 g
10 mm
Development 50 cm
MR592.07D
Striated synthetic
25mm
260 g
7 mm
MR592.10D
Striated synthetic
25mm
260 g
10 mm
MR542.07D
Smooth synthetic
25mm
260 g
7 mm
MR542.10D
Smooth synthetic
25mm
260 g
10 mm
MR512.07A
Striated metallic
25mm
340 g
7 mm
MR512.10A
Striated metallic
25mm
340 g
10 mm
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
New items
MR291.10, Baumer IVO
Coder accessories
Measuring wheels
Connected to coders, these easily accommodate a movement in materials, speed of movement, etc.
Smooth synthetic, striated synthetic or striated metallic coating.
Development of 20 cm/turn or 50 cm/turn.
Mounting bracket Z 119.017
For standard flange coders.
Supplied with 3 no. M3 x 12 screws and 3 lock washers to fix Ø 58 coders with a centring shoulder of Ø 36 mm.
Mounting base Z 119.015
For synchro flange coders.
The coder is fitted onto the base using 3 screws and 3 eccentrics which are ordered separately using reference Z 119.018.
Eccentrics Z 119006
For synchro flange coders.
3 eccentrics are needed to fit the coder.
Ref. IVO
type of
width
weight
bore
Coating
Development 20 cm
MR291.07D
Striated synthetic
12 mm
135 g
7 mm
MR291.10D
Striated synthetic
12 mm
135 g
10 mm
MR241.07D
Smooth synthetic
12 mm
135 g
7 mm
MR241.10D
Smooth synthetic
12 mm
135 g
10 mm
MR211.07A
Striated metallic
12 mm
50 g
7 mm
MR211.10A
Striated metallic
12 mm
50 g
10 mm
Development 50 cm
MR592.07D
Striated synthetic
25mm
260 g
7 mm
MR592.10D
Striated synthetic
25mm
260 g
10 mm
MR542.07D
Smooth synthetic
25mm
260 g
7 mm
MR542.10D
Smooth synthetic
25mm
260 g
10 mm
MR512.07A
Striated metallic
25mm
340 g
7 mm
MR512.10A
Striated metallic
25mm
340 g
10 mm
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
New items
GI355.070R006, Baumer IVO
Universal incremental coders Ø 58, type GI355 and GI356
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 10,000 pulses / turn.
A, B, Top zero and complemented output signals
Standard flange with 10 mm (GI355) axis or synchro flange with 6 mm (GI356) axis (See
RS
481-7212
.)
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency:
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Axial load:
50 N
Radial load:
60 N
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≤1000 m/s² (4 ms)
Output stage:
Totem pole, NPN or PNP, if the coder is
supplied at 10 → 30 Vdc, or
RS422 or TTL Line transmitter if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA
Low level ≤ 0.5 V for I = 20 mA
Axis length:
GI355 = 20 mm, GI356 = 9 mm
Operating temperature:
-25° → 100 °C
Relative humidity:
95%
Protection index:
IP 64
Dimensions without the axis (mm):
Ø 58, depth 50 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
New items
GI356.170R023, Baumer IVO
Universal incremental coders Ø 58, type GI355 and GI356
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 10,000 pulses / turn.
A, B, Top zero and complemented output signals
Standard flange with 10 mm (GI355) axis or synchro flange with 6 mm (GI356) axis (See
RS
481-7212
.)
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency:
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Axial load:
50 N
Radial load:
60 N
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≤1000 m/s² (4 ms)
Output stage:
Totem pole, NPN or PNP, if the coder is
supplied at 10 → 30 Vdc, or
RS422 or TTL Line transmitter if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA
Low level ≤ 0.5 V for I = 20 mA
Axis length:
GI355 = 20 mm, GI356 = 9 mm
Operating temperature:
-25° → 100 °C
Relative humidity:
95%
Protection index:
IP 64
Dimensions without the axis (mm):
Ø 58, depth 50 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
New items
B 148.R07XC5C, Baumer IVO
Panel / DIN Rail mount
Suitable for either panel or DIN rail mounting
Elapsed time display
Dual voltage meters, selectable by internal switch
Non-resettable
New items
BE134.012AX01, Baumer IVO
BE134 timers with 1 or 2 presets
Dual backlit LCD display (current value and preset value).
1 or 2 presets with 6 digits.
Cycle counter to choose the number of repeat operations.
8 digit totaliser, recording the total operating duration.
4 resolutions: 9999s99/100s; 999mn59s9/10s; 9999mn59s or 9999h59mn.
Start/stop function.
Addition or subtraction.
Supply voltage:
115 → 230 Vac
Number of digits:
2 rows of 6
Height of digits:
7 and 4 mm
Input:
Compatibility:
NPN, PNP or NAMUR
Response time:
30 ms or 100 μs
Signal voltage:
5 to 40 V
Output:
Relays:
2 N/O or N/C
Breaking capacity:
1 A / 250 V ac (150 VA)
Connection:
2 screw terminals, removable
Output:
24 Vdc 60 mA (for sensor)
Memory:
10 years with EEPROM
Protection index:
IP65 (front panel)
Dimensions (mm):
48 x 48 x 107
Panel cut-out (mm):
45 x 45
New items
Z 130.005, Baumer IVO
SSI series Ø 58 mm multi-turn absolute Encoders
Resolution up to 8192 points / turn for 4096 turns
SSI synchronous series outputs.
Gray or binary code.
Electrical zero positioning.
Standard flange with 10 mm shaft.
Front fixing by screws or bracket support (optional).
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Small coders, efficient and robust.
Operating voltage:
10 → 30 Vdc
Consumption:
50mA
Switching frequency:
800 kHz max.
Load:
50 N axial, 60 N radial
Rotation speed:
mechanical = 10,000 turns/min max.
electrical = 6,000 turns/min max.
Moment of inertia:
1.45 x 10-6 kgm²
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≥ 2000 m/s² (6 ms)
Operating temperature:
-20 → +85 °C
Relative humidity:
95%
Dimensions without shaft (mm):
Ø 58 x L 67
Protection index:
IP 65
Weight:
450 g
Solid Shaft / Hollow Shaft Absolute Encoders
Application
An absolute encoder provides the ability to remember the exact position following any power interruption. There is also no need for synchronisation. This is one of the reasons why absolute encoders are used where a safety standard is required (i.e. robotics industry). Typical applications are for speed or position control circuits. The features for these encoders are:
+ A unique signal for each angular position
No need for initialisation (zero reference)
Immediately after power up or after an interruption of power the position is maintained
No need for a counter to process the signal
Construction
The electrical signal of the absolute encoder is directly related to the angle of the shaft. The mechanical angular position is sensed by non contact optical elements, therefore without wear. The output of an infrared diode is transmitted through a transparent code disc and a diaphragm. The light/dark pattern is converted to an electrical signal by an array of photo diodes. The same code occurs only once per revolution. This...
New items
GI333.M70R041, Baumer IVO
Universal coders with hollow axis, Ø 58, type GI333
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 5000 pulses / turn.
A, B, Top zero and complemented output signals.
Hollow axis coders for direct mounting onto the end of a motor shaft, bored hole Ø 12 mm H7.
Concentric tightening using ring, rotation locking using rod and stopper supplied with the coder.
Anti-rotation spring available as a option.
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency: 300 kHz max.
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≥1000 m/s² (4 ms)
Universal output stage:
Totem pole, NPN or PNP compatible if the coder is
supplied at 10 → 30 Vdc, or Line transmitter compatible with
TTL or RS422 if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA,
Low level ≤ 0.5 V for I = 20 mA
Operating temperature:
-25° → 100 °C
Relative humidity: 95%
95%
Protection index: IP64
IP 64
Dimensions (mm)
Ø 58, depth 51 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Don’t hesitate to ask questions for better clarification.