Featured Products
gen4-uLCD-70DCT-CLB-AR Diablo16 Touch LCD Module with Arduino Shield The gen4 series from 4D Systems are TFT LCD Di...
The 4D Systems 7 inch embedded SPI display which features a resistive touch panel display with an integrated FTDI FT81x video engine. It has sing...
The 4D Systems 2 inch non touch embedded graphic display featured with powerful Intelligent TFT IPS display module powered by PIXXI-28. It can di...
The 4D System 4DLCD - 43480272 is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of...
The 4D System 4DLCD-28320240-IPS is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed...
The 4D System 4DLCD-70800480 is a colour active matrix LCD module incorporating amorphous silicon TDT (Thin Film Transistor). It is composed of...
gen4-uLCD-24DT Diablo16 Touch LCD Module The gen4 series from 4D Systems are TFT LCD Display Modules that offer a c...
TFT LCD Touch Screens, 4D Systems 4D Systems' range of LCD touch screens come in three sizes: 2.4 inch, 2.8...
4D Systems Resistive Touch LCD Modules with PICASO Processor for Use with Arduino The range of resistive touch LCD modules for Arduino available...
4D Systems Intelligent Display Modules The uOLED-3202X-P1 Series of active-matrix OLED modules are aimed at being i...
4D Systems PMOLED Display Starter Kits with GOLDELOX Processor for Use with Arduino The range of OLED displ...
The 4D System 4DLCD-90800480 is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of...
Popular Categories For 4D Systems
Categories For 4D Systems
Popular Items
Popular items
SK-128G2-AR, 4D Systems
4D Systems PMOLED Display Starter Kits with GOLDELOX Processor for Use with Arduino
The range of OLED display starter kit modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
Features
GOLDELOX processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
microSD card socket
2 x GPIO pins
I2C and UART serial communications
Powered from Arduino
Kit Contents
OLED Display Module
4D Arduino adapter shield
uUSB-PA5 programming adapter
4GB microSD card
Female to female 150mm 5-way jumper cable
5 way male to male adapter
Quick start user guide
Note
Arduino MCU module is not included.
4D Systems Passive Matrix OLED Displays
Popular items
4Discovery-50, 4D Systems
The 4D Systems gen4-ulcd series of displays are wall mountable intelligent display module designed for home and building automation applications. These displays can be interfaced with DIABLO16 processor. The 4Discovery's 5'' TFT display is IPS giving it very wide viewing angles. The 4Discovery is designed to be mounted directly onto a panel or wall, or any flat drillable surface. This universal mounting enables quick and easy installation almost anywhere in any orientation, enabling a wide range of customers to take advantage of this display product.
480x854 FWVGA Resolution (Full Wide Video Graphics Array), RGB 65K true to life colours, TFT Screen with integrated Capacitive Touch Panel
Programmed over RS485 using a special programmer designed specifically for the 4Discovery
6 banks of 32750 bytes of Flash memory for User Application Code and Data
32Kb of SRAM purely for the User
On-board micro-SD memory card connector for multimedia storage and data logging purposes
Popular items
SK-4Discovery-50, 4D Systems
The 4D Systems SK-4Discovery series of product are starter kit for 4Discovery-50 wall mountable intelligent display module designed for home and building automation applications. It includes 4Discovery-50, 4GB Industrial microSD Card, 4Discovery-RS485 Programmer. It works with related products like 4Discovery-RS485 Programmer, 4Discovery-35, uSD-4GB-Industrial
480x854 FWVGA Resolution (Full Wide Video Graphics Array), RGB 65K true to life colours, TFT Screen with integrated Capacitive Touch Panel
Programmed over RS485 using a special programmer designed specifically for the 4Discovery
6 banks of 32750 bytes of Flash memory for User Application Code and Data
32Kb of SRAM purely for the User
On-board micro-SD memory card connector for multimedia storage and data logging purposes
Popular items
uOLED 32024-P1T, 4D Systems
4D Systems Intelligent Display Modules
The uOLED-3202X-P1 Series of active-matrix OLED modules are aimed at being intergrated into a variety of different applications via a wealth of features designed to facilitate any given functionality quickly and cost effectively.
QVGA 240 x RGB x 320 pixel resolution
Integrated Resistive Touch Screen
65K True-to-life colours
Near 180 degree viewing angle
Easy-to-use 5-pin user interface
4D Systems Active Matrix OLED Displays
Popular items
4DLCD-90800480-RTP, 4D Systems
The 4D System 4DLCD-90800480 is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a colour TFT-LCD panel, driver IC, FPC and a back light unit and with/without a Resistive/Capacitive Touch Pan
The module display area contains 800 x 480 pixels.
This product accords with RoHS environmental criterion.
Popular items
uLCD-43D, 4D Systems
LCD Display Module with DIABLO16 processor. 4D Systems
The uLCD-43D LCD Display Module features an embedded DIABLO16 graphics controller. The DIABLO16 is driven by
Extensible Virtual Engine (EVE)
and benefits from features such as full colour image, animation, icon and video display. You also have access to
Workshop4 IDE
for software development and coding using the 4DGL graphics language.
Features & Benefits of the 4.3 inch LCD Display Module
Dimensions: 119.5 mm x 67 mm x 15.2 mm
Viewing area: 95.04 mm x 53.85 mm
480 x 272 pixel resolution
16 GPIO pins
Up to 65k colours
6 banks of 32750 bytes of flash memory
32 KB SRAM
microSD memory card socket
FAT16 DOS compatible file access
PWM audio pin
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
Note
For new designs the 4D Systems gen4 range of LCD displays should be considered, including:
gen4-uLCD-43DT (RS part 1257947)
4D Systems Colour Graphic LCD Displays
Popular items
uLCD-28PTU-AR, 4D Systems
4D Systems Resistive Touch LCD Modules with PICASO Processor for Use with Arduino
The range of resistive touch LCD modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module PICASO processor can be programmed and configured using 4D Systems Workshop4 IDE software (see datasheet for download instruction). The resistive touch LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
Features
PICASO processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
microSD card socket
13 x GPIO pins
I2C and Serial communication
Powered from Arduino
Kit Contents
LCD resistive touch module
4D Arduino adapter shield
Female to female 150mm 5-way jumper cable
Quick start user guide
Note
Arduino MCU module is not included.
For new designs the 4D Systems gen4 range of LCD displays should be considered, including:
gen4-uLCD-24DT (RS part
1257941
)
gen4-uLCD-28DT (RS part
1257942
)
gen4-uLCD-32DT (RS part
1257943
)
gen4-uLCD-43DT (RS part
1257947
)
4D Systems LCD Touchscreens
Popular items
4DLCD-FT843, 4D Systems
TFT LCD Touch Screens, 4D Systems
4D Systems' range of LCD touch screens come in three sizes: 2.4 inch, 2.8 inch, 3.2 inch and 4.3 inch. Each touch screen features an LCD panel, ILI9341 driver IC, flexible printed circuit (FPC) connector and a backlight unit.
Features & Benefits:
2.4 inch LCD —
9028568
240 x 320 pixels
Up to 65k colours
150 cd/m2 brightness
250:1 contrast ratio
6:00 viewing direction
Suitable for 2.6 V to 3.3 V power supply
Dimensions: 42.72 x 60.26 x 3.7 mm
Viewing area: 36.72 x 48.96 mm
2.8 inch LCD —
9028561
240 x 320 pixels
Up to 65k colours
150 cd/m2 brightness
250:1 contrast ratio
6:00 viewing direction
Suitable for 2.6 V to 3.3 V power supply
Dimensions: 50 x 69.2 x 4.1 mm
Viewing area: 43.2 x 57.6 mm
3.2 inch LCD —
9028565
240 x 320 pixels
Up to 65k colours
200 cd/m2 brightness
350:1 contrast ratio
12:00 viewing direction
Suitable for 2.6 V to 3.3 V power supply
Dimensions: 55.04 x 77.70 x 3.65 mm
Viewing area: 47.87 x 63.84 mm
4.3 inch LCD —
9028574
480 x 272 pixels
Up to 262k colours
400 cd/m2 brightness
500:1 contrast ratio
Suitable for 3.3 V power supply
Dimensions: 105.5 x 67.2 x 4.2 mm
Viewing area: 95.04 x 53.86 mm
4D Systems LCD Touchscreens
Popular items
gen4-FT813-43CTP-CLB, 4D Systems
The 4D Systems 7 inch embedded SPI display which features a resistive touch panel display with an integrated FTDI FT81x video engine. It has single 5V supply.
Power mode control
Programmable interrupt controller
JPEG and motion-JPEG decode
Popular items
pixxiLCD-20P2, 4D Systems
The 4D Systems 2 inch non touch embedded graphic display featured with powerful Intelligent TFT IPS display module powered by PIXXI-28. It can display full-colour images, animations, icons and video clips.
Low cost
Master I2C port
Supports all available windows fonts
Single 5V supply
Popular items
gen4-uLCD-70DCT-CLB-AR, 4D Systems
gen4-uLCD-70DCT-CLB-AR Diablo16 Touch LCD Module with Arduino Shield
The gen4 series from 4D Systems are TFT LCD Display Modules that offer a compact and easy to integrate display solution.
This 7.0 800 x 480 pixel variant features capacitive touch for applications requiring a human-machine interface and includes a cover lens bezel. Also included is an Arduino adaptor shield, allowing the module to be quickly connected to an Arduino for programming.
The design of the gen4 series makes it simple to integrate into a final product. The display module features a 30-pin ZIF socket to provide an easy connection to an application or motherboard, removing wiring headaches. If space is at a premium the connected board can sit flush on the back of the module as the display circuitry fits comfortably within the mounting base, maintain a slim profile. A micro-SD card connector provides optional multimedia storage and data logging capabilities.
gen4 Display Modules are powered by the 4D Systems Diablo16 processor, an embedded controller that provides built-in graphics, text, image and animation capability. The Diablo16 is fully compatible with the 4D Systems Workshop4 IDE, giving programmers the flexibility of 4 differing development environments.
Features
7.0 800 x 480 display module
RGB 65k true to like colours
4-wire resistive touch
Compact – module dimensions 187.0 x 102.1 x 8.3 mm (including mounting tabs)
6 banks of 32KB Flash memory for user application code and data
32KB of user RAM
16 GPIO – including 4 configurable analogue outputs
3 x I2C channels
3 x SPI channels
Up to 6 GPIO can be used as pin counters
Up to 6 GPIO for PWM
Up to 10 GPIO for pulse output
Up to 14 GPIO can be configured for quadrature encoder inputs (2 channels)
30-pin FPC connection for signals, power, communications, GPIO and programming
micro-SD card connector for multimedia storage and data logging
Dedicated PWM audio pin
Supports ...
Popular items
4DLCD-28320240-CTP-IPS, 4D Systems
The 4D System 4DLCD-28320240-IPS is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a colour IPSTFT-LCD panel, driver IC, FPC and a back light unit.
The module display area contains 240 x 320 pixels.
This product accords with RoHS environmental criterion.
New Items
New items
gen4-uLCD-70DCT-CLB-AR, 4D Systems
gen4-uLCD-70DCT-CLB-AR Diablo16 Touch LCD Module with Arduino Shield
The gen4 series from 4D Systems are TFT LCD Display Modules that offer a compact and easy to integrate display solution.
This 7.0 800 x 480 pixel variant features capacitive touch for applications requiring a human-machine interface and includes a cover lens bezel. Also included is an Arduino adaptor shield, allowing the module to be quickly connected to an Arduino for programming.
The design of the gen4 series makes it simple to integrate into a final product. The display module features a 30-pin ZIF socket to provide an easy connection to an application or motherboard, removing wiring headaches. If space is at a premium the connected board can sit flush on the back of the module as the display circuitry fits comfortably within the mounting base, maintain a slim profile. A micro-SD card connector provides optional multimedia storage and data logging capabilities.
gen4 Display Modules are powered by the 4D Systems Diablo16 processor, an embedded controller that provides built-in graphics, text, image and animation capability. The Diablo16 is fully compatible with the 4D Systems Workshop4 IDE, giving programmers the flexibility of 4 differing development environments.
Features
7.0 800 x 480 display module
RGB 65k true to like colours
4-wire resistive touch
Compact – module dimensions 187.0 x 102.1 x 8.3 mm (including mounting tabs)
6 banks of 32KB Flash memory for user application code and data
32KB of user RAM
16 GPIO – including 4 configurable analogue outputs
3 x I2C channels
3 x SPI channels
Up to 6 GPIO can be used as pin counters
Up to 6 GPIO for PWM
Up to 10 GPIO for pulse output
Up to 14 GPIO can be configured for quadrature encoder inputs (2 channels)
30-pin FPC connection for signals, power, communications, GPIO and programming
micro-SD card connector for multimedia storage and data logging
Dedicated PWM audio pin
Supports ...
New items
gen4-FT813-43CTP-CLB, 4D Systems
The 4D Systems 7 inch embedded SPI display which features a resistive touch panel display with an integrated FTDI FT81x video engine. It has single 5V supply.
Power mode control
Programmable interrupt controller
JPEG and motion-JPEG decode
New items
pixxiLCD-20P2, 4D Systems
The 4D Systems 2 inch non touch embedded graphic display featured with powerful Intelligent TFT IPS display module powered by PIXXI-28. It can display full-colour images, animations, icons and video clips.
Low cost
Master I2C port
Supports all available windows fonts
Single 5V supply
New items
4DLCD-43480272-CTP-IPS, 4D Systems
The 4D System 4DLCD - 43480272 is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a colour TFT-LCD panel, driver IC, FPC and a back light unit and with/without a Resistive/Capacitive Touch Pa
The module display area contains 480 x 272 pixels.
This product accords with RoHS environmental criterion.
New items
4DLCD-28320240-CTP-IPS, 4D Systems
The 4D System 4DLCD-28320240-IPS is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a colour IPSTFT-LCD panel, driver IC, FPC and a back light unit.
The module display area contains 240 x 320 pixels.
This product accords with RoHS environmental criterion.
New items
4DLCD-70800480, 4D Systems
The 4D System 4DLCD-70800480 is a colour active matrix LCD module incorporating amorphous silicon TDT (Thin Film Transistor). It is composed of a colour TFT-LCD panel, driver IC, FPC and a back light unit and with/without a Resistive/Capacitive Touch Pan
The module display area contains 800 x 480 pixels.
This product accords with RoHS environmental criterion.
New items
gen4-uLCD-24DT, 4D Systems
gen4-uLCD-24DT Diablo16 Touch LCD Module
The gen4 series from 4D Systems are TFT LCD Display Modules that offer a compact and easy to integrate display solution. This 2.4 240 x 320 pixel variant features 4-wire resistive touch for applications requiring a human-machine interface.
The design of the gen4 series makes it simple to integrate into a final product. The display module features a 30-pin ZIF socket to provide an easy connection to an application or motherboard, removing wiring headaches. If space is at a premium the connected board can sit flush on the back of the module as the display circuitry fits comfortably within the mounting base, maintain a slim profile. A micro-SD card connector provides optional multimedia storage and data logging capabilities.
gen4 Display Modules are powered by the 4D Systems Diablo16 processor, an embedded controller that provides built-in graphics, text, image and animation capability. The Diablo16 is fully compatible with the 4D Systems Workshop4 IDE, giving programmers the flexibility of 4 differing development environments.
Features
2.4 240 x 320 display module
RGB 65k true to like colours
4-wire resistive touch
Compact – module dimensions 78.4 x 44.8 x 7.2 mm (including mounting tabs)
6 banks of 32KB Flash memory for user application code and data
32KB of user RAM
16 GPIO – including 4 configurable analogue outputs
3 x I2C channels
3 x SPI channels
Up to 6 GPIO can be used as pin counters
Up to 6 GPIO for PWM
Up to 10 GPIO for pulse output
Up to 14 GPIO can be configured for quadrature encoder inputs (2 channels)
30-pin FPC connection for signals, power, communications, GPIO and programming
micro-SD card connector for multimedia storage and data logging
Dedicated PWM audio pin
Supports all Windows fonts
4.0 V to 5.5 V operation
RoHS and REACH compliant
CE Compliant
Kit Contents
1 x 2.4 gen4-uLCD-24DT LCD display module
1 x ge...
New items
4DLCD-FT843, 4D Systems
TFT LCD Touch Screens, 4D Systems
4D Systems' range of LCD touch screens come in three sizes: 2.4 inch, 2.8 inch, 3.2 inch and 4.3 inch. Each touch screen features an LCD panel, ILI9341 driver IC, flexible printed circuit (FPC) connector and a backlight unit.
Features & Benefits:
2.4 inch LCD —
9028568
240 x 320 pixels
Up to 65k colours
150 cd/m2 brightness
250:1 contrast ratio
6:00 viewing direction
Suitable for 2.6 V to 3.3 V power supply
Dimensions: 42.72 x 60.26 x 3.7 mm
Viewing area: 36.72 x 48.96 mm
2.8 inch LCD —
9028561
240 x 320 pixels
Up to 65k colours
150 cd/m2 brightness
250:1 contrast ratio
6:00 viewing direction
Suitable for 2.6 V to 3.3 V power supply
Dimensions: 50 x 69.2 x 4.1 mm
Viewing area: 43.2 x 57.6 mm
3.2 inch LCD —
9028565
240 x 320 pixels
Up to 65k colours
200 cd/m2 brightness
350:1 contrast ratio
12:00 viewing direction
Suitable for 2.6 V to 3.3 V power supply
Dimensions: 55.04 x 77.70 x 3.65 mm
Viewing area: 47.87 x 63.84 mm
4.3 inch LCD —
9028574
480 x 272 pixels
Up to 262k colours
400 cd/m2 brightness
500:1 contrast ratio
Suitable for 3.3 V power supply
Dimensions: 105.5 x 67.2 x 4.2 mm
Viewing area: 95.04 x 53.86 mm
4D Systems LCD Touchscreens
New items
uLCD-28PTU-AR, 4D Systems
4D Systems Resistive Touch LCD Modules with PICASO Processor for Use with Arduino
The range of resistive touch LCD modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module PICASO processor can be programmed and configured using 4D Systems Workshop4 IDE software (see datasheet for download instruction). The resistive touch LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
Features
PICASO processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
microSD card socket
13 x GPIO pins
I2C and Serial communication
Powered from Arduino
Kit Contents
LCD resistive touch module
4D Arduino adapter shield
Female to female 150mm 5-way jumper cable
Quick start user guide
Note
Arduino MCU module is not included.
For new designs the 4D Systems gen4 range of LCD displays should be considered, including:
gen4-uLCD-24DT (RS part
1257941
)
gen4-uLCD-28DT (RS part
1257942
)
gen4-uLCD-32DT (RS part
1257943
)
gen4-uLCD-43DT (RS part
1257947
)
4D Systems LCD Touchscreens
New items
uOLED 32024-P1T, 4D Systems
4D Systems Intelligent Display Modules
The uOLED-3202X-P1 Series of active-matrix OLED modules are aimed at being intergrated into a variety of different applications via a wealth of features designed to facilitate any given functionality quickly and cost effectively.
QVGA 240 x RGB x 320 pixel resolution
Integrated Resistive Touch Screen
65K True-to-life colours
Near 180 degree viewing angle
Easy-to-use 5-pin user interface
4D Systems Active Matrix OLED Displays
New items
SK-128G2-AR, 4D Systems
4D Systems PMOLED Display Starter Kits with GOLDELOX Processor for Use with Arduino
The range of OLED display starter kit modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
Features
GOLDELOX processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
microSD card socket
2 x GPIO pins
I2C and UART serial communications
Powered from Arduino
Kit Contents
OLED Display Module
4D Arduino adapter shield
uUSB-PA5 programming adapter
4GB microSD card
Female to female 150mm 5-way jumper cable
5 way male to male adapter
Quick start user guide
Note
Arduino MCU module is not included.
4D Systems Passive Matrix OLED Displays
New items
4DLCD-90800480-RTP, 4D Systems
The 4D System 4DLCD-90800480 is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a colour TFT-LCD panel, driver IC, FPC and a back light unit and with/without a Resistive/Capacitive Touch Pan
The module display area contains 800 x 480 pixels.
This product accords with RoHS environmental criterion.
Don’t hesitate to ask questions for better clarification.