What are the shipping charges for products like Video, Data & Voice Wiring Testers?

Yes. We keep updating our stock frequently and if a product like Video, Data & Voice Wiring Testers is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Video, Data & Voice Wiring Testers is not in stock then we will let you know.

Where are your products like Video, Data & Voice Wiring Testers manufactured?

Yes. We keep updating our stock frequently and if a product like Video, Data & Voice Wiring Testers is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Video, Data & Voice Wiring Testers?

Yes. We keep updating our stock frequently and if a product like Video, Data & Voice Wiring Testers is not in stock then we will let you know.

How long will it take to receive the order that I placed for Video, Data & Voice Wiring Testers?

Yes. We keep updating our stock frequently and if a product like Video, Data & Voice Wiring Testers is not in stock then we will let you know.

Are your products Video, Data & Voice Wiring Testers in stock?

Yes. We keep updating our stock frequently and if a product like Video, Data & Voice Wiring Testers is not in stock then we will let you know.

Video, Data & Voice Wiring Testers | Data Cable & Network Test Equipment | Test & Measurement

New items

00-00247, LeCroy

The Teledyne LeCroy quantumdata 280 Test Set is a combination test instrument set comprised of an HDMI/HDBaseT Video Generator (Tx) and Analyzer (Rx). Each device is small compact and battery powered. The 280 Test Set is ideally suited for professional A/V integrators and home theatre installers. This feature-rich test set enables you to conduct basic verification and diagnostic tests on HDMI/HDBaseT cables, video distribution networks and individual A/V components. The HDMI input and output ports support testing up to 18 Gbps data rate and 600 MHz pixel rate and the HDBaseT input and output ports support testing up to 300 MHz pixel rate (Long Reach mode supported up to 1080p). The instrument sets features and convenient operation can shorten time on the job site and reduce callbacks by enabling you to run basic verification and diagnostic tests on complex video distribution installations quickly and efficiently. Shortens time on job site Simplifies testing process Verifies network components and design Test HDMI and HDBaseT cables, devices, components and entire video distribution networks end to end up to 18G (HDMI). Verify video and audio transmission through a video distribution network. Battery powered

Product Detail

New items

NC-500, Greenlee

NC-500 NETcat® Pro Wiring Tester The NETcat® Pro2 is a digital tool for fast, accurate checking of cables, wiring and network service. Operated using a back-lit touch screen display, the NETcat® Pro2 tests wiring continuity and proper pair allocation, measures the length of cables, determines if network service is available and identifies Power over Ethernet (PoE) service. When used with the NC-510 Accessory Kit (rs 736-1848), containing seven (7) expansion remote test modules, the NETcat® Pro2 can uniquely test coax or twisted pair jacks from a central location eight (8) at a time.Using a fingertip or the built-in stylus, the screen can be used to control and display a range of tests from fault finding to TDR length measurement. The display can be set to English, Spanish, French or German language Identifies active network devices on 10/100/1000 Base-T Ethernet (802.3) networks. Identifies PoE (source device detection). Memo Pad/reminder feature - stored in non-volatile memory. Field replaceable F type connector. Graphical touch screen display with contrast adjustment and backlight. Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables. Patch cable and remote jack wire-map. Detects shorts, opens, reversed, crossed and split pairs. Office identification using remote ID units. Troubleshoots and verifies a wide range of networks. Remote jack ID and verification. Generate four distinct, precision tones for tracing low-loss cables like Cat 5. Operates on a single 9V battery, with low battery indicator. Dimensions 85 x 35 x 170 mm) Weight 0.45 lb. (200 g) Power Requirements 9V Alkaline Battery (PP3) Display LCD Dot Pixels: 128 x 128 dots Viewing Area 60.0 x 58.4 Backlight White LED Buttons LCD touch-screen, single momentary contact push button Operating Temperature 0 °C → +50 °C Storage Temperature -20 °C → +70 °C Interface Connectio...

Product Detail

New items

RS_233-8919, RS PRO

RS PRO RJ45/RJ11 Continuity Tester Features and Benefits: RS PRO

Product Detail

New items

50450808, Tempo

PTS100/200 - Pair Tracing Kit The PTS Pair Tracing System comprises the PTS 200 Tone Generator and the PTS 100 Probe in a woven polyester carrying pouch. The System is designed to provide an easy to use and cost effective means of tracing wire pairs Fast, Accurate Wire Identification Sends Tone to Identify Wires Polarity Indication Continuity Test Adjustable Volume Control Easy to Operate 2-Line Modular Test Lead Rugged Industrial design Water Resistant Typical Applications: PTS 200 Tone Generator: The PTS 200 may be connected via the modular plug or the crocodile clips to the pair under test. Depending on the switch position the Tone Generator will test Polarity continuity or short circuits. The PTS 200 can be used on twisted pair wiring (Telecom, Datacom, security / alarm, audio and electrical), single conductors, coaxial cables, de-energized AC wiring and just about any other wiring you can think of. PTS 100 Probe: The PTS 100 Probe has a built-in loudspeaker to make it easy to hear the tracing signals and a near/far sensitivity Adjustment to allow both broad searches and pinpoint identification of wires. To operate just press the button on the top and adjust the sensitivity control to hear the tone generated by the PTS 200 Note Only for use on non-powered cables, powered by PP3 batteries (not supplied). Image for illustration purposes only

Product Detail

New items

MS2-100, Fluke Networks

MicroScanner2 Cable Verifier The Fluke MicroScanner2 streamlines voice/data/video cable and service testing. Its Revolutionary user interface makes testing fast, easy, and crystal clear. Various features including available services (10/100/1000 Ethernet, POTS, PoE voltage), cable length, wiremap, cable ID, and distance to fault are displayed on one oversized backlit screen. Optional extra Remote Identifiers allow you to test successive outlets in both twisted pair and coaxial installations. All models are highly reliable and excellent quality. Features & Benefits Displays cable length, wiremap, cable ID, and distance to fault on one screen Tests all common media types, including RJ11, RJ45, Coaxial, with no adapters Built-in IntelliTone digital and analogue toning Ergonomic Design Includes carry case

Product Detail

New items

RS_462-9267, RS PRO

RS PRO TES 48 LAN Cable Tester Features and Benefits:

Product Detail

New items

RS_136-8577, RS PRO

RS PRO LAN Cable Multifunction Tester Features and Benefits: What is TDR? RS PRO

Product Detail

New items

RS_425-0754, RS PRO

TES-45 Easy to use slim-line, handheld LAN cabling verifier Complete wire test mapping of unshielded twisted pair cable per EIA/TIA 568A Test all 4 pairs Checks 10Base-T and other 4 pair UTP cables for shorts, opens, crossed pairs, reversed pairs and split pairs 10Base 2 BNC wiring Tests and identifies up to 4 cables with additional cable identifiers Easy to read display indicates fault conditions Green and red LED Low battery indication Can test a wide range of UTP cables such as 10Base T, 100Base Tx, 10Base 2 (Coax), 356A, TIA-568A, TIA-568B etc. Checks for wiring faults such as open, short, reversed, crossed and split wires Measures cables from 1.2m up to 150m

Product Detail

New items

52047869, Tempo

701k Classic Tone and Probe Kit The Model 701K is recognised by technicians as the industry standard for wire and cable identification. The kit is used for the identification of single conductors or cables within a bundle, at a cross connect point or at remote ends. Supplied in a sturdy woven polyester carrying case the 701K kit comprises the 77HP High Power Tone Generator and the 200 EP Inductive Amplifier Fast, Accurate Wire Identification Sends Tone to Identify Wires Two Distinct Tone Signatures Polarity Indication Continuity Test Talk Battery supply Adjustable Volume Control Visual and Signal Strength Indication Large Speaker for Noisy Environments Facility for Headset/Buttset connection Choice of Metallic or Plastic Probe Tip 2-Line Modular Test Lead 3-Colour LED identifies AC Ring Voltage Rugged Industrial Design

Product Detail

New items

33A-100-10, Molex

Shielded Type II Data wiring tester consisting of master and remote units, designed to check the integrity of 2, 3 and 4 pair voice and data channels with a loop distance of up to 3048 metres. Three jack sockets are incorporated into each half to enable 8 way RJ45 USOC, 568A and 568B sequences to be checked. Sockets are fully shielded enabling the testing of both UTP and STP/FTP wiring systems. Continuously sequenced LED display provides immediate diagnosis of standard wiring faults Fully testable shield continuity Master and remote units snap and lock together for easy carriage and storage Faults detected: shorts, opens, miswires, reversals and split pairs The tester requires a PP3 9V battery.

Product Detail

New items

MS2-KIT, Fluke Networks

MicroScanner2 Professional Kit A series of Fluke MicroScanners with all the test capability of the MS2-100, but includes all accessories in a single, preconfigured carry case. Being supplied with various products including a RJ11 patch cord and owners CDs, they are perfect for your application. All models are highly reliable and excellent quality. Features & Benefits Remote identifiers #2-7 IntelliTone Pro 200 probe Shielded twisted-pair RJ45 patch cord Clip-set - RJ45 to 8 alligator clip test lead Bare wire adapter F Coaxial push on patch cord Accessory soft pouch 2 x AA alkaline batteries 1 x 9 V alkaline battery Packaged in a deluxe Fluke Networks carry case. Revolutionary Interface - graphical wiremap, length, cable ID and distance to fault displayed on one screen Multimedia Support - tests all common media types including RJ11, RJ45, Coaz, with no need for adapters IntelliTone Toning - trace virtually any cable or wire pair with IntelliTone digital and analogue toning VDV Service Detection - verified today's media services, including 10/100/1000 Ethernet, POTS and PoE Rugged Housing - integrated rubber holster enhances grip and makes it durable enough for the toughest jobs Oversized Display - large, backlit LCD maked results crystal clear whether in bright sunchine or in a dark closet Supplied with MicroScanner 2 Cable Verifier with main wiremap adapter, remote identifiers #2-7, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter, F Coax push on patch cord, accessory soft pouch, (2) AA alkaline batteries, (1) 9 V alkaline battery, MicroScanner 2 Getting Started Guide, IntelliTone Pro Getting Started Guide, packaged in a deluxe Fluke Networks carry case

Product Detail

New items

NC-100, Greenlee

NC-100 NETcat® Micro Wiring Tester The NETcat® Micro is a device that verifies the integrity of both twisted pair and coaxial telecom cables. It uses high-speed digital technology to verify wiring continuity and check for the correct allocation of wire pairs, showing the results on a backlit display. Four durable keys select the test and wire tracing modes.,A wide range of tracing tone options makes it easy to track and identify high performance Category 5/6/7 wiring. An auto-off function helps extend battery life Tests: Shielded Twisted Pair (STP), Un-Shielded twisted pair (UTP), Coaxial cables and Telephone pairs TIA/EIA standard wiring pair verification Detects shorts, opens, reversed polarity, crossed and split pairs Generates three distinct, selectable digital tone patterns for cable tracing and troubleshooting Tracing modes can be adjusted for high performance LAN cables Complete set of connector types standard (telephone, LAN and coax) Nested remote allows end-to-end testing of all wiring types Simple testing of LAN wiring and phone lines Detection of common wiring and connector errors Warning of voltages Checks for reversed telephone wires Dimensions 150 x 70 x 33mm Weight 220g including remote unit and battery Power Source 9V Alkaline battery (PP3) User Interface Display LCD Icon and seven segment type Backlight Green LED Buttons Four momentary contact push button Environmental Operating Temperature 0 °C → +50 °C Storage Temperature -10 °C → +60 °C Humidity Up to 95% non-condensing Interface Connections RJ45 shielded socket RJ12 6-way socket F-type threaded female coaxial connectors Network Split Pair Detection Minimum cable length 2 to 3 meters (5 to 10 ft.) depending on cable type Pair Tracing Tones Alternating frequencies of 577Hz and 983Hz are produced at three user selectable rates. Designed for standard tone probes, but compatib...

Product Detail