Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 3

Showing Results For: Thyristor Trigger Modules

Thyristor Trigger Modules


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
United Automation
Rohs Verified
BM2R, United Automation
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 92.55
United Automation
Rohs Verified
BM3R, United Automation
Obsolete
Check Stock & Lead Times Packaging Options
1 +
£ 40.19
United Automation
Rohs Verified
BFTM-3, United Automation
Obsolete
Check Stock & Lead Times Packaging Options
1 +
£ 59.85
Showing
1 -

New Items
New items
BM3R, United Automation

BM3R, United Automation

Single Cycle/Dual Cycle Burst Fire Driver Module, BM3R The BM3R 50Hz module has been designed to offer all 3-Phases switched Burst Firing of a thyristor assembly or complete thyristor controllers for driving resistive loads. In Single-Cycle or Dual-Cycle mode, these modules use the fastest burst rates possible, providing very accurate control and minimising Harmonic distortion & Flicker within the system. In addition the standard variable burst rate, adjustable from 1 to 30 seconds, is also available. Standard DIN Rail Mount Inhibit Input Control Options (0-5V, 0-10V, 1-5V, 2-10V, 0-20mA, 4-20mA, Manual Potentiometer) Single-Cycle / Dual-Cycle or adjustable Burst Firing On Board Fuse (1A) Isolated Pulse Transformer Outputs On board LED Indication of Power, Burst Rates and Fault Conditions Soft Start The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.
New items
BFTM-3, United Automation

BFTM-3, United Automation

Burst Firing Trigger Modules, BFTM - United Automation Burst firing trigger module for driving both triacs & thyristors. Single & 3-phase versions available. Zero voltage switching Opto-isolated outputs Voltage or manual potentiometer control LED indication of output Top hat or G profile DIN-rail mounting Supply either 240V 50/60Hz 1.2VA or 15V to 32Vdc 20mA max Signal span 2V to 30Vdc Zero offset 0 to 30% of span Trigger current output 250mA max continuous or 1.0A for 10ms Isolation to output 7500V peak Line voltage of driven thyristors 100V to 440Vac Operating temperature range -10°C to +60°C The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.
New items
BM2R, United Automation

BM2R, United Automation

Single Cycle/Dual Cycle Burst Fire Driver Module, BM2R The BM2R 50Hz module has been designed to offer 2-Phase switched, out of three-phase Burst Firing of a thyristor assembly or complete thyristor controller for driving resistive loads. In Single-Cycle or Dual-Cycle mode, these modules use the fastest burst rates possible, providing very accurate control and minimising Harmonic distortion & Flicker within the system. In addition the standard variable burst rate, adjustable from 1 to 30 seconds, is also available. Standard DIN Rail Mount Inhibit Input Control Options (0-5V, 0-10V, 1-5V, 2-10V, 0-20mA, 4-20mA, Manual Potentiometer) Single-Cycle / Dual-Cycle or adjustable Burst Firing On Board Fuse (1A) Isolated Pulse Transformer Outputs LED Indication of Power, Burst Rates and Fault Conditions The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Thyristor Trigger Modules and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Thyristor Trigger Modules or any other product.
This depends on the Thyristor Trigger Modules individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Thyristor Trigger Modules and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Thyristor Trigger Modules.
Yes. We keep updating our stock frequently and if a product like Thyristor Trigger Modules is not in stock then we will let you know.