Products Found: 1185
Showing Results For: Pneumatic Guided Cylinders
Pneumatic Guided Cylinders
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
SMC
EMGQM20-20, SMC
40 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 235.29
Festo
DFM-10-15-P-A-GF, Festo
102 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 115.72
Festo
DFM-10-20-P-A-GF, Festo
103 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 117.14
Festo
DFM-10-5-P-A-GF, Festo
104 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 112.91
Festo
DFM-6-15-P-A-GF, Festo
6 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 110.08
Festo
DFM-6-10-P-A-GF, Festo
5 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 108.66
Festo
DFM-10-10-P-A-GF, Festo
101 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 114.33
Festo
DFM-6-5-P-A-GF, Festo
8 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 107.25
SMC
MXH10-20Z, SMC
47 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 227.37
SMC
MXP12-15, SMC
48 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 260.98
SMC
MXQ8C-40Z, SMC
55 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 319.72
SMC
MXS12-50A, SMC
58 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 406.64
SMC
MXS6-30AS, SMC
67 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 314.25
SMC
CXSJM10-30, SMC
48 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 145.92
SMC
CXSL20-40, SMC
49 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 276.77
SMC
EMGQM40-25, SMC
78 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 334.13
Festo
DGSL-8-50-EA, Festo
18 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 598.06
Festo
DGSL-10-30-EA, Festo
96 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 541.10
Festo
DGSL-8-30-EA, Festo
17 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 531.05
SMC
MXS12-75B, SMC
59 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 554.90
Festo
DGSL-20-200-EA, Festo
5 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1180.05
Festo
DGSL-20-40-EA, Festo
6 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 644.02
Festo
DGSL-25-10-EA, Festo
9 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 585.27
Festo
DGSL-25-200-EA, Festo
12 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1221.81
Festo
DGSL-25-20-EA, Festo
13 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 618.77
Showing
1 -
New Items
New items
MXQ12-40, SMC
Air slide table w/built-in guide rail
Bore size (mm): 6, 8, 12, 16, 20, 25
Standard or symetric styles
Adjuster options: rubber stopper, shock absorber, metal stopper
Auto switch capable
New items
MGPM40TF-50Z, SMC
SMC MGP Compact Guide Cylinder with End Lock
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on the top or side. CQM double-acting cylinders are non-rotatable, offer a high resistance to side loads, and are able to withstand lateral loading forces that are more than twice the force experienced by conventional stopper cylinders. SMC MGP cylinders with End Lock are suitable for conveyor line stopping, lifting, positioning, or push-off applications.
Note
May be used with reed switch
161-782
, available in most markets.
New items
DFM-32-30-P-A-KF, Festo
DFM Compact Guided Cylinders
Festo DFM compact guided cylinders are available in various sizes to suit many applications. The sturdy and precise construction is maintenance free and is highly resistant to torque and lateral external forces. The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. All integrated mounting for proximity sensors and a choice of supply port positioning.
Guide Variations
DFM guided cylinders are available with either plain bearing or recirculating ball bearing guides. Plain bearing units feature two large guide rods and four plain bearings for excellent to lateral forces. Recirculating ball bearing units are ideal for applications where torque loads are present.
Features and Benefits
Drive and guide unit in a single housing
Rigid construction
High resistance to torques and lateral forces
Maintenance free
Flexible cushioning plates reduce noise during operation and increase service life
FESTO Guided Cylinders
New items
DGST-20-30-PA, Festo
The Festo DGST series double-acting mini slide actuator has a elastic cushioning at both ends, non-adjustable, with end-position adjustment via proximity sensor. The actuator stroke is a 30 mm with operating pressure of 8 bar.
Piston diameter - 20 mm
Operating mode of drive unit - yoke
Assembly position - any
New items
DFM-80-50-P-A-GF, Festo
The Festo's DFM series of guided actuator have flexible cushioning plate to reduce noise during operation and increase service life. Integrated slots on the actuator body allow for incorporating proximity sensor to measure the linear motion of the piston. Its piston diameter is 80mm with stroke length which is 50mm and assembled in any position.
Ambient temperature -20 to 80 °C
Centre of gravity distance from working load to yoke plate 125 mm
New items
MGPM25TF-20Z, SMC
SMC MGP Compact Guide Cylinder with End Lock
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on the top or side. CQM double-acting cylinders are non-rotatable, offer a high resistance to side loads, and are able to withstand lateral loading forces that are more than twice the force experienced by conventional stopper cylinders. SMC MGP cylinders with End Lock are suitable for conveyor line stopping, lifting, positioning, or push-off applications.
Note
May be used with reed switch
161-782
, available in most markets.
New items
DGST-12-10-PA, Festo
The Festo DGST series double-acting mini slide actuator has a elastic cushioning at both ends, non-adjustable, with end-position adjustment via proximity sensor. The actuator stroke is a 10 mm with operating pressure of 8 bar.
Piston diameter - 12 mm
Operating mode of drive unit - yoke
Assembly position - any
New items
DGST-25-200-PA, Festo
The Festo DGST series double-acting mini slide actuator has a elastomer cushioning, at both ends, without end-position adjustment via proximity sensor. The actuator stroke is a 200 mm with operating pressure of 8 bar.
Piston diameter - 25 mm
Operating mode of drive unit - yoke
Assembly position - any
New items
MGPM32TF-75Z, SMC
SMC MGP Compact Guide Cylinder with End Lock
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on the top or side. CQM double-acting cylinders are non-rotatable, offer a high resistance to side loads, and are able to withstand lateral loading forces that are more than twice the force experienced by conventional stopper cylinders. SMC MGP cylinders with End Lock are suitable for conveyor line stopping, lifting, positioning, or push-off applications.
Note
May be used with reed switch
161-782
, available in most markets.
New items
DFC-4-5-P-GF, Festo
The Festo's DFC series mini guided drive has no sensing facility with plain-bearing guide which have flexible cushioning plate to reduce noise during operation and increase service life. Its piston diameter is 4mm with stroke length which is 5mm and assembled in any position.
Ambient temperature -5 to 60 °C
Centre of gravity distance from working load to yoke plate 5 mm
New items
DFM-25-50-P-A-GF, Festo
DFM Compact Guided Cylinders
Festo DFM compact guided cylinders are available in various sizes to suit many applications. The sturdy and precise construction is maintenance free and is highly resistant to torque and lateral external forces. The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. All integrated mounting for proximity sensors and a choice of supply port positioning.
Guide Variations
DFM guided cylinders are available with either plain bearing or recirculating ball bearing guides. Plain bearing units feature two large guide rods and four plain bearings for excellent to lateral forces. Recirculating ball bearing units are ideal for applications where torque loads are present.
Features and Benefits
FESTO Guided Cylinders
New items
DFM-20-50-P-A-GF, Festo
DFM Compact Guided Cylinders
Festo DFM compact guided cylinders are available in various sizes to suit many applications. The sturdy and precise construction is maintenance free and is highly resistant to torque and lateral external forces. The DFM series of guided actuators have flexible cushioning plates to reduce noise during operation and increase service life. All integrated mounting for proximity sensors and a choice of supply port positioning.
Guide Variations
DFM guided cylinders are available with either plain bearing or recirculating ball bearing guides. Plain bearing units feature two large guide rods and four plain bearings for excellent to lateral forces. Recirculating ball bearing units are ideal for applications where torque loads are present.
Features and Benefits
FESTO Guided Cylinders