Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 13

Showing Results For: Hydraulic Gear Pumps

Hydraulic Gear Pumps


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
SAI9410, SMC
62 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1537.53
Bosch Rexroth
0510225022, Bosch Rexroth
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 202.33
RS_125-4329, Parker
10 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 251.54
RS_125-4325, Parker
6 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 255.03
RS_125-4326, Parker
7 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 102.78
Bosch Rexroth
0510525074, Bosch Rexroth
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 186.00
Bosch Rexroth
0510225006, Bosch Rexroth
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 176.93
Bosch Rexroth
0510725030, Bosch Rexroth
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 189.05
Bosch Rexroth
0510525022, Bosch Rexroth
5 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 171.73
Bosch Rexroth
0510725112, Bosch Rexroth
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 269.33
Bosch Rexroth
0510425022, Bosch Rexroth
91 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 165.20
Bosch Rexroth
0510425043, Bosch Rexroth
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 165.20
Xylem Flojet
Rohs Verified
R3811343A, Xylem Flojet
33 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 250.46
Showing
1 -

New Items
New items
0510225022, Bosch Rexroth

0510225022, Bosch Rexroth

Self Aspirating External Gear Pump, 1:8 Tapered Shaft New principle for the housing sealing, giving long housing service life Long service life for seals, even at maximum temperature Plain bearing for high loads Monoblock bearing Simple and robust design New principle of hydrostatic side clearance compensation Note Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B 20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B 10 ≥100. Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
0510725112, Bosch Rexroth

0510725112, Bosch Rexroth

Self Aspirating External Gear Pump, 1:8 Tapered Shaft New principle for the housing sealing, giving long housing service life Long service life for seals, even at maximum temperature Plain bearing for high loads Monoblock bearing Simple and robust design New principle of hydrostatic side clearance compensation Note Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B 20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B 10 ≥100. Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
0510225006, Bosch Rexroth

0510225006, Bosch Rexroth

Self Aspirating External Gear Pump, 1:5 Tapered Shaft Plain bearings cater for high load applications To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut Note Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B 20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B 10 ≥100. Supplied with Instruction leaflet. Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
0510425043, Bosch Rexroth

0510425043, Bosch Rexroth

Self Aspirating External Gear Pump, 1:8 Tapered Shaft New principle for the housing sealing, giving long housing service life Long service life for seals, even at maximum temperature Plain bearing for high loads Monoblock bearing Simple and robust design New principle of hydrostatic side clearance compensation Note Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B 20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B 10 ≥100. Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
0510425022, Bosch Rexroth

0510425022, Bosch Rexroth

Self Aspirating External Gear Pump, 1:5 Tapered Shaft Plain bearings cater for high load applications To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut Note Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B 20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B 10 ≥100. Supplied with Instruction leaflet. Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
RS_125-4326, Parker

RS_125-4326, Parker

Fixed Displacement Gear Pump, 1:8 Tapered Shaft Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide. Up to 275 bar (4000 psi) continuous operation High efficiency Low noise Wide variety of integral valve options Single and bi-rotational motors Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
0510725030, Bosch Rexroth

0510725030, Bosch Rexroth

Self Aspirating External Gear Pump, 1:5 Tapered Shaft Plain bearings cater for high load applications To assist with installation, a range of flanged fittings for pipe connection is available separately, in right angle pattern Each fitting is supplied complete with fixing screws, 0-ring, cutting ring and retaining nut Note Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B 20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B 10 ≥100. Supplied with Instruction leaflet. Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
RS_125-4325, Parker

RS_125-4325, Parker

Fixed Displacement Gear Pump, 1:8 Tapered Shaft Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide. Up to 275 bar (4000 psi) continuous operation High efficiency Low noise Wide variety of integral valve options Single and bi-rotational motors Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
RS_125-4329, Parker

RS_125-4329, Parker

Fixed Displacement Gear Pump, 1:8 Tapered Shaft Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide. Up to 275 bar (4000 psi) continuous operation High efficiency Low noise Wide variety of integral valve options Single and bi-rotational motors Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
New items
SAI9410, SMC

SAI9410, SMC

The SMC offers a SAI series of portable hydraulic pump for transparent hydraulic which meets the training needs for technology that are related to hydraulic components in a very visual way. It consist of a single phase motor with a start and stop switch as well as a filter cap and filter. Transparent tank holding 6 litres Gear pump 3 Quick connector couplings Air bubble insertion system in the circulation oil
New items
0510525074, Bosch Rexroth

0510525074, Bosch Rexroth

Self Aspirating External Gear Pump, 1:8 Tapered Shaft New principle for the housing sealing, giving long housing service life Long service life for seals, even at maximum temperature Plain bearing for high loads Monoblock bearing Simple and robust design New principle of hydrostatic side clearance compensation Note Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B 20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B 10 ≥100. Gear Pumps Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Hydraulic Gear Pumps and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Hydraulic Gear Pumps or any other product.
This depends on the Hydraulic Gear Pumps individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Hydraulic Gear Pumps and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Hydraulic Gear Pumps.
Yes. We keep updating our stock frequently and if a product like Hydraulic Gear Pumps is not in stock then we will let you know.