Rates
10+
£ 0.94
Products Found: 412
Showing Results For: Polyester Film Capacitors
Polyester Film Capacitors
FILTERS
Filters
Showing
1 -
New Items
New items
MMK27.5226J63F13L4TRAY, KEMET
MMK Series
Kemet MMK series metallized polyester capacitors with radial leads. The MMK series are encapsulated in a self-extinguishing material, with electrically welded tinned wire radial leads. The MMK series are designed for general purpose high reliability use, as well as bypassing and signal coupling.
Vacuum evaporated aluminium electrodes
Self-extinguishing encapsulation material to UL 94V-0
Radial leads
Insulation resistance, measured at 20°C to IEC 384-2
C ≤ 0.33μF:15000 MΩ (30000 MΩ, Ur 0.33 μF: 5000ΩF (10000ΩF, Ur > 100V)
Operating temperature range
-55°C to 100°C (Above +85°C voltage derating -1.25%/°C)
Climatic category
IEC 55/100/56
New items
B32529C6102J, EPCOS
B32529 Series
Typical applications are general purchase blocking, coupling, decoupling, bypassing, and RFI for automotive
High pulse strength
High contact reliability
Stacked-film technology
Plastic case with epoxy resin sealing (UL 94 V-0)
New items
225P15494YD3, Cornell-Dubilier
Cornell-Dubilier 225P Orange Drop® Series
Cornell Dubilier 225P Orange Drop® series polyester film capacitors are designed for operation in a wide range of demanding environments and applications. The 225P capacitors are wound from the most reliable polyester film and aluminium foil available and are protected by a rugged conformal coating of orange epoxy. The 225P series is an ideal choice for many commercial and industrial electronic applications, from power supplies and instrumentation to audio amplifiers and test equipment.
New items
B32523Q1335K, EPCOS
MKT Series
Construction
Dielectric: Polyethylene Terephthalate (Polyester)
Layer technology available in 5, 7.5, 10, 15, 22.5 and 27.5 mm pitch
Plastic case (UL 94 V-0)
Epoxy resin sealing
Features
High pulse strength
High contact reliability
Loss factor tan δ (in 10-3) at 20°C (maximum values)
CN
0.1μF CN
CN > 1μF
at 1kHz
8
10
10
10kHz
15
20
-
Permitted a.c. voltage Ueff:
40 to 200V AC (f
IEC climate category:
55/100/56
Reliability at 40°C, 0.5 UN :
1 x 10
-9
/ h = 1 fit
Flank gradient (du/df)max.:
2 to 400V/μs
Capacitance tolerance:
10%
Temperature range:
-55 to +100°C
New items
B32560J0475K, EPCOS
B32560 / B32562 Series
Stacked-film radial wire-ended metallised polyester film capacitors
These devices are uncoated so care must be taken to observe creepage and clearances to adjacent live parts
Ideal for general consumer and industrial electronics applications including lamp ballast circuits for energy saving lamps
Capacitance Tolerance (%)
10
Operating Temperature (°C)
-55 to +100
Temperature Coefficient (ppm/°C)
+600
Insulation Resistance
V
R
C
R
≤ 0.33μF
C
R
≥ 0.33μF
≤ 100Vdc
3750 MΩ
1250 s
≥ 250Vdc
7500 MΩ
2500 s
New items
New items
ECQ-E2106KFB, Panasonic
Panasonic ECQE(F) Polyester Film Capacitors
Panasonic ECQE(F) film capacitors feature flame retardant epoxy resin coating and a metallised polyester film construction. These polyester capacitors are self-healing, non-inductive and offer excellent electrical characteristics.
Lead wire type
Powder resin coated
Large capacitance range available
Wide voltage range available
Applications
ECQE(F) capacitors are recommended for general purpose usage.
New items
New items
New items
F1772 468-2000, Vishay
X2 class anti-interference capacitors, series F1772-2000 310 V ac
Metallised film capacitors for interference suppression installed between phases or between phase and neutral
Epoxy resin-sealed, flame-retardant case
Approvals
(EN 132400) CEI 384-14 iss. 2 Ongoing qualifications, VDE 0565-1 class X2, SEV 1055 1978, DEMKO CEI 384-14 1981, SEMKO CEI 384-14 1981, NEMKO CEI 384-14 1981, FIMKO CEI 384-14 1981, UL 1283/UL 1414 (up to 1 μF), CSA 222 No.8-M 1986, IMQ CEI 40-7/V1-1981, ÖVE CEI 384-14 1981
New items
B32529C0224J, EPCOS
B32529 Series
Typical applications are general purchase blocking, coupling, decoupling, bypassing, and RFI for automotive
High pulse strength
High contact reliability
Stacked-film technology
Plastic case with epoxy resin sealing (UL 94 V-0)
New items
B32560J6103K, Epcos
B32560 / B32562 Series
Stacked-film radial wire-ended metallised polyester film capacitors
These devices are uncoated so care must be taken to observe creepage and clearances to adjacent live parts
Ideal for general consumer and industrial electronics applications including lamp ballast circuits for energy saving lamps
Capacitance Tolerance (%)
10
Operating Temperature (°C)
-55 to +100
Temperature Coefficient (ppm/°C)
+600
Insulation Resistance
V
R
C
R
≤ 0.33μF
C
R
≥ 0.33μF
≤ 100Vdc
3750 MΩ
1250 s
≥ 250Vdc
7500 MΩ
2500 s