What are the shipping charges for products like Enclosure Thermostats?

Yes. We keep updating our stock frequently and if a product like Enclosure Thermostats is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Enclosure Thermostats is not in stock then we will let you know.

Where are your products like Enclosure Thermostats manufactured?

Yes. We keep updating our stock frequently and if a product like Enclosure Thermostats is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Enclosure Thermostats?

Yes. We keep updating our stock frequently and if a product like Enclosure Thermostats is not in stock then we will let you know.

How long will it take to receive the order that I placed for Enclosure Thermostats?

Yes. We keep updating our stock frequently and if a product like Enclosure Thermostats is not in stock then we will let you know.

Are your products Enclosure Thermostats in stock?

Yes. We keep updating our stock frequently and if a product like Enclosure Thermostats is not in stock then we will let you know.

Enclosure Thermostat | Thermostat For Reptile Enclosure

New items

01011.0-41, Stego Elektrotechnik

The electronic thermostat with integrated switch module is used to control DC powered devices with high capacities in control and switch cabinets. Heaters, coolers, filter fans or signal devices can directly be controlled via an internal electronic circuit. The external sensor can be positioned freely anywhere in the control cabinet for precise temperature measurements. Additionally, this thermostat is available in versions that not only measure temperature via the external sensor, but also the relative humidity. High DC switching capacity Adjustable temperature Small hysteresis Optical operating display (LED) Integrated switch module Precise measurement via an external sensor

Product Detail

New items

01163.0-00, Stego Elektrotechnik

Tamperproof Thermostats Tamperproof thermostats are pre-set and cannot be tampered with, so it is impossible to have the incorrect setting. Installation is simple and quick by screw terminals (up to 2,5mm²) and using a din-rail clip feature. Two (dual) tamperproof thermostats in the one housing allow independent control of heating and cooling from the one unit. NC (red), NO (blue) Compact °F or °C Fixed temperature settings Easy to install DIN rail mounting High switching tolerance Dimensions 33x33x47mm Operating voltage, max switching capacity 230v ac, 5(1.6)A, DC30W Contact resistance less than 20mΩ Service life greater than 100,000 cycles Dual = NC and NO in one housing Approvals CE; VDE; UL

Product Detail

New items

01190.0-00, Stego Elektrotechnik

Stego Electronic Thermostat 24Vdc, ET 011 For regulating high performance DC 24V equipment. Heating or cooling appliances as well as signal devices can be switched via the potential free change-over contact. These electronic thermostats have, in comparison with mechanical thermostats, a low hysteresis which makes the switching point and setting accuracy more precise. High DC breaking capacity Adjustable temperature Plastic casing according to UL94 V-0, light grey Vertical fitting position Clip for 35mm DIN rail, EN 50022 Switch temperature difference approximately 3K Sensor element PTC Contact resistance Service life >100000 cycles Maximum switching capacity 28Vdc, 16A EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection 5-pole terminal for 2.5mm 2 , clamping torque 0.8Nm Operating/storage temperature 0 to +60°C/-45 to +80°C IP20

Product Detail

New items

01172.0-00, Stego Elektrotechnik

DIN Rail Thermostats Normally open (N/O) thermostats may be used to initiate a cooling system or trigger an alarm when the temperature in the enclosure rises above the set position Normally closed (N/C) thermostats may be used to initiate an anti-condensation heater system or trigger an alarm when the temperature in the enclosure falls below the set position Electrical terminals wire size 2.5mm 2 Operating voltage 250Vac

Product Detail

New items

SK 3114.200, Rittal

Rittal TopTherm Fan and Filter Units Rittal TopTherm fan and filter units are efficient, easy to assemble and versatile. The TopTherm series requires no tools during assembly, exchange or maintenance. The fan module and power connection are simple to position to suit the needs of the application, a latch on the grille allows for fast filter replacement and the electrical connections are managed with spring clamp terminals. TopTherm units feature efficient technology that enables greater pressure stability and more constant air flows. Stock No: 756-9935 is a temperature indicator. Features and Benefits: Flexible assembly options Minimum installation depth Even air distribution

Product Detail

New items

01160.0-01, Stego Elektrotechnik

Tamperproof Thermostats Tamperproof thermostats are pre-set and cannot be tampered with, so it is impossible to have the incorrect setting. Installation is simple and quick by screw terminals (up to 2,5mm²) and using a din-rail clip feature. Two (dual) tamperproof thermostats in the one housing allow independent control of heating and cooling from the one unit. NC (red), NO (blue) Compact °F or °C Fixed temperature settings Easy to install DIN rail mounting High switching tolerance Dimensions 33x33x47mm Operating voltage, max switching capacity 230v ac, 5(1.6)A, DC30W Contact resistance less than 20mΩ Service life greater than 100,000 cycles Dual = NC and NO in one housing Approvals CE; VDE; UL

Product Detail

New items

01146.9-00, Stego Elektrotechnik

Stego Compact DIN Rail Thermostats KTO 011 (697-4437) thermostat normally closed, contact breaker for regulating heaters.,KTS 011 (697-4446) thermostat normally open, contact maker for regulating filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded. Large setting range Small size 60 x 33 x 43 mm Plastic casing according to UL94 V-0, light grey Variable fitting position and simple to mount (clip for 35mm DIN rail) Maximum switching capacity: 250Vac, 10(2)A; 120Vac 15(2)A; Vdc 30W Switch temperature difference 7K (±4K) Thermostatic bimetal sensor element Contact resistance Service life >100,000 cycles EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection 2-pole terminal for 2.5mm 2 , clamping torque 0.8Nm Operating/storage temperature -20 to +80°C/-45 to +80°C IP20 Approvals VDE Standards VDE (697-4437 & 697-4446) UL, VDE, CSA (121-7322 & 121-7323)

Product Detail

New items

FLZ520 17111000014, Pfannenberg

DIN Rail Thermostats - Pfannenberg FLZ Series When used in conjunction with a cabinet heater thermostats can be used to control the temperature inside a control cabinet. These thermostats can also be used with a filter fan to provide benefits in energy consumption, materials and time due to need-based use of the fans. Mechanical bi-metallic thermostat for temperature in enclosures Spring contact DC max 30W Connection by 0.5-2.5mm 2 screw clamps IP20 protection Working/storage temperature range -20°C to +80°C Mounting method is snap fastening for 35mm profile bars in accordance with EN 60715 Colour RAL 7035 - light grey Approvals UL (FLZ520 & FLZ530)

Product Detail

New items

01147.9-00, Stego Elektrotechnik

Stego Compact DIN Rail Thermostats KTO 011 (697-4437) thermostat normally closed, contact breaker for regulating heaters.,KTS 011 (697-4446) thermostat normally open, contact maker for regulating filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded. Large setting range Small size 60 x 33 x 43 mm Plastic casing according to UL94 V-0, light grey Variable fitting position and simple to mount (clip for 35mm DIN rail) Maximum switching capacity: 250Vac, 10(2)A; 120Vac 15(2)A; Vdc 30W Switch temperature difference 7K (±4K) Thermostatic bimetal sensor element Contact resistance Service life >100,000 cycles EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection 2-pole terminal for 2.5mm 2 , clamping torque 0.8Nm Operating/storage temperature -20 to +80°C/-45 to +80°C IP20 Approvals VDE Standards VDE (697-4437 & 697-4446) UL, VDE, CSA (121-7322 & 121-7323)

Product Detail

New items

01161.0-00, Stego Elektrotechnik

Tamperproof Thermostats Tamperproof thermostats are pre-set and cannot be tampered with, so it is impossible to have the incorrect setting. Installation is simple and quick by screw terminals (up to 2,5mm²) and using a din-rail clip feature. Two (dual) tamperproof thermostats in the one housing allow independent control of heating and cooling from the one unit. NC (red), NO (blue) Compact °F or °C Fixed temperature settings Easy to install DIN rail mounting High switching tolerance Dimensions 33x33x47mm Operating voltage, max switching capacity 230v ac, 5(1.6)A, DC30W Contact resistance less than 20mΩ Service life greater than 100,000 cycles Dual = NC and NO in one housing Approvals CE; VDE; UL

Product Detail

New items

01185.1-00, Stego Elektrotechnik

Stego Hazardous Area Thermostats, REx 011 Series This thermostat of temperature class T6 (85 °C max.) is utilised for the regulation of heaters deployed in areas with explosion hazard. The high switching performance allows direct control of a heater. Compact, small mechanical thermostat offering a high response accuracy, small switch temperature difference and a very long service life (switching cycles). Features and Benefits For areas with explosion hazard High switching capacity Compact Design Set temperature Ready-to-use with strain relief Temperature class T6 (85°C max)

Product Detail

New items

01140.0-00, Stego Elektrotechnik

Stego Compact DIN Rail Thermostats KTO 011 (697-4437) thermostat normally closed, contact breaker for regulating heaters.,KTS 011 (697-4446) thermostat normally open, contact maker for regulating filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded. Large setting range Small size 60 x 33 x 43 mm Plastic casing according to UL94 V-0, light grey Variable fitting position and simple to mount (clip for 35mm DIN rail) Maximum switching capacity: 250Vac, 10(2)A; 120Vac 15(2)A; Vdc 30W Switch temperature difference 7K (±4K) Thermostatic bimetal sensor element Contact resistance Service life >100,000 cycles EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection 2-pole terminal for 2.5mm 2 , clamping torque 0.8Nm Operating/storage temperature -20 to +80°C/-45 to +80°C IP20 Approvals VDE Standards VDE (697-4437 & 697-4446) UL, VDE, CSA (121-7322 & 121-7323) Approvals VDE

Product Detail