Products Found: 7
Showing Results For: Etching Chemicals
Etching Chemicals
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
HellermannTyton
ZAK-M22, HellermannTyton
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.02
5 +
£ 26.62
10 +
£ 25.22
CIF
AR44, CIF
69 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 24.81
3 +
£ 23.25
5 +
£ 22.28
Kontakt Chemie
82009, Kontakt Chemie
69 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 18.26
Fortex
5L-FERRIC, Fortex
101 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 17.07
Fortex
600-014, Fortex
9 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 32.88
CIF
AR36, CIF
11 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 9.86
10 +
£ 8.38
25 +
£ 7.40
Sunhayato
DP-10, Sunhayato
76 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1.32
10 +
£ 1.23
25 +
£ 1.15
Showing
1 -
New Items
New items
5L-FERRIC, Fortex
The Fortex Ferric Chloride solution is a full strength 45 Baume solution which is used for etching copper printed circuit boards (PCB) and various other metals. It is recommended to wear necessary protective clothing and other safety equipments before using the same. For etching on copper, brass and bronze the solution or etchant needs to be diluted with 30% added water.
Usable temperature range between: 35°C and 55°C
Always use at the optimum temperature of approximately 45°C in a temperature controlled etching tank for safe and efficient etching
New items
DP-10, Sunhayato
Developing Agent for Photosensitive Boards
Power-type developer for developing positive photosensitive boards after exposure to light
Comparison table
Part name
Development guide
NET
DP-10
Single-side 100
´
150 mm, approx. 3 pcs
10 g (for 200 cc)
DP-50
Single-side 100
´
150 mm, approx. 15 pcs
50 g (for 1000 cc)
New items
ZAK-M22, HellermannTyton
The HellermannTyton vapour capsule protects an electronics enclosure from corrosion during operation. It has multimetal protection that neutralizes contaminants. Does not affect the circuit boards or sensitive components. The capsules provide targeted corrosion protection in hard-to-reach spaces and work synergistically with other zerust products.
Multimetal protection that neutralizes contaminants
Suitable for new equipment and to protect the reliability of existing equipment
New items
AR44, CIF
The CIF Ammonium Persulfate for rapid etching sachet 1 Litre.
For rapid etching
New items
82009, Kontakt Chemie
KONTAKT POSITIV 20 - positive photo-sensitive lacquer
Positive photo-sensitive lacquer for manufacturing printed circuit boards, with clear copper tracks laminated onto epoxy FR4 or Bakelite.
Positive work: can be used with a Mylar transparent film or a single traced design; the printed circuit diagram is always the image of the original positive.
Blue sensitive layer is resistant to etching agents when not insulated.
Perfectly uniform, even layer.
New items
600-014, Fortex
PCB Preparation Fine Etch Crystals
An effective alternative to Ferric Chloride, this etchant eliminates the staining and mess caused by traditional etchants
The mixed solution remains odourless and any splashes or drips can be wiped away with a damp cloth, preventing staining
6-8 minute etching times at 50°C should be expected with fresh solution
4-6 week life expected in tank (can be increased by adding a little more powder to exhausted solution)
Supplied in 1kg powder bag sufficient to make 5 litres of etching solution
Based on a Sodium Persulphate and Stabiliser formula
Processing Chemicals
Suitable for use with the RS PCB tanks, these processing chemicals are supplied conveniently packaged to make up sufficient working solution for one tank fill. Instructions for the use of these chemicals are printed on the package, and are repeated in the instruction leaflet supplied with all tanks in the range.
Warning
This is a hazardous product. It may intensify fire. It is harmful if swallowed. It can cause: serious eye irritation; allergy or asthma symptoms or breathing difficulties if inhaled; an allergic skin reaction.
New items
AR36, CIF
Ferric Chloride Stain Remover
This unique powder is ideal for removing ferric chloride stains from clothing, PCB tanks, work benches and other affected areas. It is an etching chemical containing organic acid, ideally used for large areas of equipment. It can be used as a scrubbing compound, applying it directly to an area and rinsing off, or as a cleaning solution, when an object can be left for a time in a dilution (typically 100g to 500ml of water), then rinsed. May be used up to 500g/l for stubborn stains.
Processing Chemicals
Suitable for use with the RS PCB tanks, these processing chemicals are supplied conveniently packaged to make up sufficient working solution for one tank fill. Instructions for the use of these chemicals are printed on the package, and are repeated in the instruction leaflet supplied with all tanks in the range.
Warning
Always wear suitable protective gloves and faceshield when handling.