What are the shipping charges for products like Plastic Sheets?

Yes. We keep updating our stock frequently and if a product like Plastic Sheets is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Plastic Sheets is not in stock then we will let you know.

Where are your products like Plastic Sheets manufactured?

Yes. We keep updating our stock frequently and if a product like Plastic Sheets is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Plastic Sheets?

Yes. We keep updating our stock frequently and if a product like Plastic Sheets is not in stock then we will let you know.

How long will it take to receive the order that I placed for Plastic Sheets?

Yes. We keep updating our stock frequently and if a product like Plastic Sheets is not in stock then we will let you know.

Are your products Plastic Sheets in stock?

Yes. We keep updating our stock frequently and if a product like Plastic Sheets is not in stock then we will let you know.

Plastic Sheets | Polyethylene Sheets | Acrylic Sheets

New items

RS_194-1132, Tufnol®

Tufnol®, Kite Brand Kite Brand meets BS2572 Type P3 (EN60893 type PF CP 206) equivalent to the former BS5102 Type 1 and BS1137 Type 1, which have been widely used in the electrical industry for many years. Readily machinable and can be hot punched in thickness up to 3.2mm Applications include terminal boards, mounting panels, tag strips, coil formers, insulating sleeves and bushes, busbar supports,coil supports, insulated enclosures, brush holders, insulating spacers, plugs and sockets Dielectric Strength In Oil At 90C8.1 MV/m (Flatwise), stock no. 194-1154 Cross Bearing Strength 150 MPa Impact Strength 2.7kj/m² Compressive Strength (Flatwise) 350 MPa Compressive Strength (Edgewise) 200 MPa Youngs Modulus 6.9 GPa Maximum Service Temperature (long term) +90°C Relative Density 1.35 g/cm 3 Water Absorption 1.0 mg/cm 2 Standards BS 2572 Type P3 (EN 60893 type PF CP 206); BS 5102 Type 1; BS 1137 Type 1

Product Detail

New items

RS_484-1704, Tufnol®

Tufnol®, 6F/45 6F/45 is a fine weave cotton fabric combined with modified epoxy resin to produce a rigid sheet material with outstanding electrical performance. The key benefits of this material are: Very high resistance to electrical tracking Mechanically strong and wear resistant Resistant to a wide range of chemicals Conforms to BS2572 Type F6 and EN60893 Type EP CC 301 Can be machined to high tolerance with a good machined finish Cross Bearing Strength 170 MPa Dielectric Strength In Oil At 90°C 80 kV (edgewise) Compressive Strength (Flatwise) 290 MPa Compressive Strength (Edgewise) 190 MPa Maximum Service Temperature (longterm) 130°C Relative Density 1.36 g/cm 3 Specfic Heat At 23°C 1.5 kJ/kgK Thermal Coductivity At 23°C 0.36 W/m K Water Absorption 0.55 mg/cm² Standards BS 2572 Type F6; EN 60893 Type EP CC 301

Product Detail

New items

RS_681-211, Tufnol®

Tufnol®, Carp & Whale Brand Carp brand A laminate plastic based on a fine weave high quality fabric. It combines excellent mechanicals strength and low water absorption with high electrical properties. Conforms to EN60893 type PF CC 305 Various applications include fine pitched gears and other precision components Whale brand A medium weave high quality fabric laminated plastic. Whale is the most widely used general purpose phenolic fabric. Conforms to EN60893 type PF CC 203 Good mechanical and electrical strength Frequently used for larger and more rugged components including rollers, thrust washers, slidways, jigs and fixtures Carp Brand Whale Brand Cross Breaking Strength 150MPa 130MPa Impact Strength 8.6 kJ/m 2 11.5 kJ/m 2 Compressive Strength (Flatwise) 350 MPa 310 MPa Compressive Strength (Edgewise) 200 MPa 200 MPa Youngs Modulus 6.9 GPa 6.3 GPa Maximum Service Temperature (long term) 120°C 120°C Relative Density 1.36 g/cm 3 1.36 g/cm 3 Specfic Heat At 23°C 1.5 kJ/kgK 1.5 kJ/kgK Thermal Conductivity At 23°C 0.37 W/m K 0.37 W/m K Water Absorption 2.5 mg/cm 3 3.3 mg/cm 3 Standards Carp: EN60893 type PF CC 305, Whale: EN60893 type PF CC 203 Standards EN 60893 Type PF CC 305

Product Detail

New items

RS_197-4441, DuPont

Acetal Homopolymer - Delrin® Delrin® has similar properties to Acetal Copolymer but with better mechanical and machining properties. Resistance to hot water and alkalis is slightly inferior. Max Service Temp. 100°C Elongation 40% Tensile Strength 70 MPa Hardness (Rockwell-Shore D) M90 Rockwell Flammability Rating UL 94 HB Water Absorption 0.5% at saturation Standards 7777 Acetal Copolymer & Homopolymer Both materials are available in rod and sheet form, they are abrasion and impact resistant and exhibit good chemical resistance. They are easy to machine and have excellent self lubricating properties. Both are UV light resistant and can be welded.

Product Detail

New items

RS_257-7322, NYLATRON

Nylon 66 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc.,Nylon 66 is unaffected by chlorinated hydrocarbons. Weak acids (pH3) will quickly cause decomposition. Exposure to alkalis (pH>11) and hot water will cause dimensional change due to absorption. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 5 - 35 % (at break) % Tensile Strength 75 MPa Hardness (Rockwell-Shore D) M100 (Rockwell) Flammability Rating UL 94 HB Water Absorption 7% at saturation Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_193-5430, NYLATRON

Cast Nylon 6 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 40 - 60 % (at break) % Tensile Strength 65 MPa Hardness (Rockwell-Shore D) M88 (Rockwell) Flammability Rating UL 94 HB Water Absorption 6% at saturation Standards DIN 50 014 Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_257-7372, NYLATRON

Nylon 66 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc.,Nylon 66 is unaffected by chlorinated hydrocarbons. Weak acids (pH3) will quickly cause decomposition. Exposure to alkalis (pH>11) and hot water will cause dimensional change due to absorption. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 5 - 35 % (at break) % Tensile Strength 75 MPa Hardness (Rockwell-Shore D) M100 (Rockwell) Flammability Rating UL 94 HB Water Absorption 7% at saturation Standards 7777 Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

RS_771-358, Tufnol®

Tufnol®, 10G/40 Epoxy glass laminate with extremely high mechanical and electrical strength. Good dielectric properties under dry and humid conditions Excellent rigidity and dimensional stability Conforms to EN60893 type RP GC 201 Cross Bearing Strength 490 MPa Dielectric Strength In Oil At 90°C 70 kV Compressive Strength (Flatwise) 415 MPa Compressive Strength (Edgewise) 300 MPa Maximum Service Temperature (longterm) 130°C Relative Density 1.36 g/cm 3 Specific Heat At 23° 1.5 kJ/kgK Thermal Conductivity At 23°C 0.42 W/mK Water Absorption 0.5 mg/cm 3 Standards EN 60893 type RP GC 201

Product Detail

New items

RS_771-500, Tufnol®

Tufnol®, Carp & Whale Brand Carp brand (fine weave) A laminate plastic based on a fine weave high quality fabric. It combines excellent mechanicals strength and low water absorption with high electrical properties. Conforms to EN60893 type PF CC 305 Various applications include fine pitched gears and other precision components Whale brand (medium weave) A medium weave high quality fabric laminated plastic. Whale is the most widely used general purpose phenolic fabric. Conforms to EN60893 type PF CC 203 Good mechanical and electrical strength Frequently used for larger and more rugged components including rollers, thrust washers, slidways, jigs and fixtures Carp Brand Whale Brand Cross Breaking Strength 150MPa 130MPa Impact Strength 8.6 kJ/m 2 11.5 kJ/m 2 Compressive Strength (Flatwise) 350 MPa 310 MPa Compressive Strength (Edgewise) 200 MPa 200 MPa Youngs Modulus 6.9 GPa 6.3 GPa Maximum Service Temperature (long term) 120°C 120°C Relative Density 1.36 g/cm 3 1.36 g/cm 3 Specfic Heat At 23°C 1.5 kJ/kgK 1.5 kJ/kgK Thermal Conductivity At 23°C 0.37 W/m K 0.37 W/m K Water Absorption 2.5 mg/cm 3 3.3 mg/cm 3 Standards Carp: EN60893 type PF CC 305, Whale: EN60893 type PF CC 203 Standards EN 60893 Type PF CC 305

Product Detail

New items

RS_257-7338, NYLATRON

Nylon 66 - MoS 2 Filled Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc.,Nylon 66 is unaffected by chlorinated hydrocarbons. Weak acids (pH3) will quickly cause decomposition. Exposure to alkalis (pH>11) and hot water will cause dimensional change due to absorption. Black in colour Max. Service Temp. (Long Term) 100°C Elongation 5 - 35 % (at break) % Tensile Strength 75 MPa Hardness (Rockwell-Shore D) M100 (Rockwell) Flammability Rating UL 94 HB Water Absorption 7% at saturation Nylatron® / MoS 2 Filled Nylon These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.

Product Detail

New items

E21776/29, Tufnol

Tufnol®, Kite Brand Kite Brand meets BS2572 Type P3 (EN60893 type PF CP 206) equivalent to the former BS5102 Type 1 and BS1137 Type 1, which have been widely used in the electrical industry for many years. Readily machinable and can be hot punched in thickness up to 3.2mm Applications include terminal boards, mounting panels, tag strips, coil formers, insulating sleeves and bushes, busbar supports,coil supports, insulated enclosures, brush holders, insulating spacers, plugs and sockets Dielectric Strength In Oil At 90C8.1 MV/m (Flatwise), stock no. 194-1154 Cross Bearing Strength 150 MPa Impact Strength 2.7kj/m² Compressive Strength (Flatwise) 350 MPa Compressive Strength (Edgewise) 200 MPa Youngs Modulus 6.9 GPa Maximum Service Temperature (long term) +90°C Relative Density 1.35 g/cm 3 Water Absorption 1.0 mg/cm 2 Standards BS 2572 Type P3 (EN 60893 type PF CP 206); BS 5102 Type 1; BS 1137 Type 1

Product Detail

New items

RS_325-7091, DuPont

Acetal Homopolymer - Delrin® Delrin® has similar properties to Acetal Copolymer but with better mechanical and machining properties. Resistance to hot water and alkalis is slightly inferior. Max Service Temp. 100°C Elongation 40% Tensile Strength 70 MPa Hardness (Rockwell-Shore D) M90 Rockwell Flammability Rating UL 94 HB Water Absorption 0.5% at saturation Acetal Copolymer & Homopolymer Both materials are available in rod and sheet form, they are abrasion and impact resistant and exhibit good chemical resistance. They are easy to machine and have excellent self lubricating properties. Both are UV light resistant and can be welded.

Product Detail