What are the shipping charges for products like Enclosure Heaters?

Yes. We keep updating our stock frequently and if a product like Enclosure Heaters is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Enclosure Heaters is not in stock then we will let you know.

Where are your products like Enclosure Heaters manufactured?

Yes. We keep updating our stock frequently and if a product like Enclosure Heaters is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Enclosure Heaters?

Yes. We keep updating our stock frequently and if a product like Enclosure Heaters is not in stock then we will let you know.

How long will it take to receive the order that I placed for Enclosure Heaters?

Yes. We keep updating our stock frequently and if a product like Enclosure Heaters is not in stock then we will let you know.

Are your products Enclosure Heaters in stock?

Yes. We keep updating our stock frequently and if a product like Enclosure Heaters is not in stock then we will let you know.

Enclosure Heaters | Electronic Heating

New items

02031.0-00, STEGO

Stego Hazardous Area Compact Heaters, CREx 02 Series Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment. Features and Benefits For areas with explosion hazard Large convection surface Clip and screw flange fixing Ready-to-use with strain relief Maintenance free Temperature class T3 (200°C max) 50 W to 250 W Temperature class T4 (135°C max) 50 W to 200 W Temperature class T5 (100°C max) 50 W to 100 W

Product Detail

New items

SK3105370, Rittal

Enclosure Heaters - SK Series Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting plate PTC technology with Computational Fluid Dynamics assisted design for superior heating performance Requires external Thermostat and or Hygrostat to regulate heating in the enclosure Fan assisted heat flow on models 200W and above DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Product Detail

New items

02033.0-00, STEGO

Stego Hazardous Area Compact Heaters, CREx 02 Series Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment. Features and Benefits For areas with explosion hazard Large convection surface Clip and screw flange fixing Ready-to-use with strain relief Maintenance free Temperature class T3 (200°C max) 50 W to 250 W Temperature class T4 (135°C max) 50 W to 200 W Temperature class T5 (100°C max) 50 W to 100 W

Product Detail

New items

FGC3000, DBK Enclosures

Cirrus 60 Fan Heater High power to size ratio - 3 power settings Lightweight and easy to fit Harness length 240mm Electrical Protection Class II Independent fan circuit to aid climate cooling Operating temperature range -10 → +70°C Storage temperature range -40 → +70°C DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Product Detail

New items

FLH250 17025015007, Pfannenberg

Fan Heater - Pfannenberg FLH 250 Plug-in terminal connection Suitable for both 50Hz and 60Hz Duty cycle 100% Heating element is resistance type with temperature monitor Fitting position is airflow vertical, exit at top Airflow 50m 3 /h (50Hz), 61m 3 /h (60Hz) Constructed from aluminium extrusion, clear anodised Binding post connection capacity: single filament 2 x 0.5 - 2.5mm 2 ; fine multi-filament (soldered, wire and sleeve, pin terminal) 2 x 0.5 - 1.5mm 2 Snap-in mounting for 35mm DIN-rail in accordance with EN 50022 Operating temperature -20°C to +70°C Storage temperature -40°C to +70°C Protection rating IP44 Note Guard (see designation +2) adds 3mm to height dimension quoted Accessories available separately include thermostats FLZ510, FLZ520, FLZ530, hygrostat FLZ600 Approvals UL

Product Detail

New items

06022.0-00, STEGO

Touch-Safe Heater Touch-Safe heaters are designed for use in every application and area where enclosures and cases that house electrical / electronic components must be heated to avoid condensation and low temperatures. The aluminium heater body is covered with a plastic housing. This plastic housing enables the surface temperature to be significantly decreased in comparison to conventional aluminium heaters. With ever-increasing packing densities within panels and enclosures, this allows the gap between the heater and panel components to decrease. Some Touch-Safe models have an integrated thermostat. Operating voltage 120-240Vac/dc (Min 110v , Max 265v) Small size Double-insulated Quick DIN rail mounting Touch-safe screw terminals Approvals VDE; UL DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Product Detail

New items

04000.0-00, STEGO

Convection Large surface area, anodised aluminium heaters with long service life and no mechanical parts. They have class I insulation. Surface mounting clips are available separately. Protected to IP54 Comply with DIN VDE 0700 Part 1 and EN60335/1 Tropicalised Self regulating PCT heating elements 500mm long silicone covered supply leads. Note Below 140Vac/dc heating performance is reduced by approx 10% Mount as shown in photograph DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Product Detail

New items

06010.2-00, STEGO

Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and hygrostats can directly be connected to the heater. This heater is also available in a version with plug-in thermostat requiring no additional wiring. The heaters are designed for permanent operation. Low surface temperature Quick mounting due to clip fixing Double insulated (plastic) Wide voltage range Small size

Product Detail

New items

03097.3-12, STEGO

The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is available with an integrated electronic thermostat or integrated electronic hygrostat. The model with thermostat is available with internal or external sensor. The fan heater with integrated hygrostat is equipped with an external sensor. The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity. The DCR 030 was designed as a stationary unit for the bottom of the enclosure. For wall fixing the fan heater DCR 130 is recommended. High DC heating performance Integrated thermostat or hygrostat (optional) Small hysteresis Integrated switch module Screw fixing Optical indicator (LED)

Product Detail

New items

02802.2-00, STEGO

These fan heaters prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. The heaters are connected using the internal terminal connectors. The small size of the CS / CSL 028 heaters make them ideal for use in enclosures where space is at a premium. Small, compact design Quiet in operation Dynamic heating up Clip or screw fixing

Product Detail

New items

NSYCR20WU3, Schneider Electric

The Schneider Electric ClimaSys CR range are PTC resistance heaters prevent the formation of condensation and guarantee the ideal temperature for the correct operation of the electronic components in the enclosure. The resistance heaters for electrical and electronic enclosures are equipped with PTC-type heating devices (Positive Temperature Coefficient). The insulated PTC heater comes with a large range of power levels from 10 W to 550 W. Large range of power levels Innovating design Easy installation and connection High thermal efficiency Improved convection and quick fixing

Product Detail

New items

FLH-T1000 17099310007, Pfannenberg

Pfannenberg FLH-T Series Enclosure Heater with Thermostat Pfannenberg FLH-T series heaters with integrated thermostats have been specially developed for the most demanding environments, such as for use within wind turbines and for use in the telecommunications sector. Unique to the industry, the FLH-T series heaters are robust, reliable and long-life. Can be used under extreme conditions (-40°C to +70°C) Fan design with ball bearing: guaranteed long service life Wide range of power ratings available Approvals UL, cUL

Product Detail