Cube Connectors, 2 or 3 way
20mm and 30mm corner cube kits containing all necessary cover caps for a neat finish. The 2 way kits are suitable for structures such as picture frames, and the 3 way kits are suitable for the building of tables and shelving.
Self-tapping fasteners and caps included
DesignLINE version with special silver paint
Multi-Purpose Bracket
Multi-purpose brackets, e.g. for:
Shelves
Structural reinforcement
Securing systems to the floor
Include centering lugs for rapid, precise assembly, with protection against turning
Fasteners not included
390-1827
has 8.7mm wide slots on centre, M6 fixings recommended.
390-1833
and
459-7479
have 10mm wide slots on centre, M8 fixings recommended.
M8 fixings are recommended for all these brackets for floor fixing.
The Bosch Rexroth bracket with centering lugs for rapid, precise assembly with protection against turning. Centering lugs can be easily broken off for assembly on plates or at right angles to the slot.
Version designLINE with special silver paint
(RAL 9006) for an especially high-quality design
Sliding block offset for off-centre positioning of the 45/45 bracket
Cover cap to protect from dirt, available in signal
grey (RAL 7004) and black ESD (RAL 9005)
The Bosch Rexroth's T-Nut series are standard element for secure, conductive connections.
Profile finishing is not required
Insulating cover cap for decoupling directly grounded components
for use with T-nuts for 8 mm slots in a 10 mm slot
Sliding Block
Suitable for Fastening Heavy Loads to T-Slotted Profiles
Slides into the Ends of T-Slot
Easy to Reposition
Grade 8.8
6mm : Stainless Steel
8mm and 10mm : Zinc Plated Steel
Spring : Spring Steel
RS Article Number
M
anufacturer Part Number
Thread Size
4667297
3842523142
M5
3900357
3842514929
M5
3900363
3842514930
M6
3900379
3842514931
M8
3900391
3842528741
M5
3900408
3842528738
M6
3900414
3842528735
M8
Steel Base Plate
Steel base plates used for constructing supports and for separating and protective walls
Fixing screws not included (M8x20 T-bolt required - mfr. part no. 3842528715 & M8 flange nut - mfr. part no. 3842345081)
Barriers and Handrails
Easy hazardous area planning
Pre-assembled components - flexible and of modular construction
Fast on-site assembly
Attractive design
Constant protection at low costs
The modular and versatile Bosch Rexroth EcoSafe guarding system offers hazardous area protection for personnel in environments that pose a serious risk to individuals and organisations. The EcoSafe modules offer a wide range of combination possibilities and a flexible, low-cost protective system solution. The emphasis is on easy and fast assembly and the system can also be extended without any difficulty. Unlike steel systems, system upgrades or conversions pose no problem as the modules can be modified to suit changing needs at any time. The Bosch Rexroth EcoSafe protective system meets the strictest European standards for protective barriers.
The EcoSafe system offers the organisation:
Angle Brackets
Bosch Rexroth angle brackets can be used to make a strong connection between 20 x 20, 30 x 30, 40 x 40, 45 x 45 or 50 x 50 profiles at an angle of 90°
.
Features & Benefits
Brackets are unpainted
Includes non-turning centring lugs for rapid and precise alignment
Product Application Information
Used for shelf supports, structure reinforcement, securing systems to the floor and so on.
The Bosch Rexroth bracket 30/30 with centering lugs for rapid, precise assembly and protection against turning. It has centering lugs that can be easily broken off for assembly on plates or at right angles to the slot.
Cover cap to protect from dirt
Available signals are grey (RAL 7004) and black ESD (RAL 9005)
Profile finishing is not required
Version designLINE with special silver paint
Retractable Sliding Blocks with Attached Spring
Large supporting surface
Transmitting high force safely
Swivel-in for direct insertion into groove or removal
8mm size are 16mm long
10mm size are 20mm long
Thread size M5
RS
449-5086
Thread size M6
RS
449-5092
, RS
449-5115
Thread size M8
RS
449-5109
, RS
449-5137
Core Screw, Strut Connector Hex-star Socket
Available for 6, 8 and 10mm groove profiles
Most cost effective connecting element
Special shaped screw head and self-tapping thread produce a conductive connection between the profiles
No thread cutting required
Type GW (without toothing)
0° to 180° infinite positioning of two round tubes of the same size
Dimensions (mm)
GW25
GW 30
GW 40
GW 50
A
25.1
30.1
40.15
50.2
B
25.1
30.1
40.15
50.2
C
45
45
60
70
D
40
40
56
66
E
40
40
56
66
G
40
40
56
66
H
43
43
60
70
K
136
136
188
218
L
146
146
200
230
M
73
73
100
115
P
33
33
48
58
S
M8x35
M8x35
M10x50
M10x60
T
M8x35
M8x35
M10x50
M10x60
MSX Device Clamp
MSX device clamps are designed to clamp both round and square tubes. These clamps are available in different sizes so they can be used in various structural systems. Made with a glass fibre reinforced technopolymer.
Fitting is with M5 cylindrical head screw
MSX Accessories
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Connecting Components and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Connecting Components or any other product.
This depends on the Connecting Components individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Connecting Components and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Connecting Components.
Yes. We keep updating our stock frequently and if a product like Connecting Components is not in stock then we will let you know.