Fan Heaters

The Radiant Heater and Fan Heater is designed to prevent condensation by raising the internal temperature a few degrees above the ambient temperature. With a power consumption of 30 Watts and a max surface temperature of approximately 90 °C, this heater is ideal for maintaining a comfortable environment in various settings. FLH 030 operates at 230V and has a thermal power of 30 Watts for effective heating performance. Equipped with PTC heating element for temperature regulation and monitoring. Suitable for both 50 Hz and 60 Hz systems, ensuring versatile usage. With an IP 44 protection class, the heater offers reliable performance in different environments. Compact and lightweight design, weighing 250g, for easy installation and portability.

PIC32MX320/340/360/420/440/460 32-Bit Microcontrollers The Microchip PIC32MX320/340/360/420/440/460 family of microcontrollers are high-performance 32-bit devices based upon the powerful MIPS M4K Core. The rich set of integrated on-board peripherals and other features make these MCUs General Purpose devices suitable for a variety of applications, including those requiring USB communication. Microcontroller Features MIPS32® M4K® 32-bit core with 5-stage pipeline 80 MHz maximum frequency - 1.56 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state Flash access Single-cycle multiply and high-performance divide unit MIPS16e® mode for up to 40% smaller code size Two sets of 32 core register files (32-bit) to reduce interrupt latency Prefetch Cache module to speed execution from Flash Operating temperature range of -40°C to +105°C Pin-compatible with most PIC24/dsPIC® DSC devices Multiple power management modes Multiple interrupt vectors with individually programmable priority Fail-Safe Clock Monitor Mode Configurable Watchdog Timer with on-chip Low-Power RC Oscillator for reliable operation Internal 8 MHz and 32 kHz oscillators 3 MHz to 25 MHz crystal oscillator Peripherals 10-bit Analogue to Digital Converter (ADC) – 16 Channels Atomic SET, CLEAR and INVERT operation on select peripheral registers Up to 4-channel hardware DMA with automatic data size detection USB 2.0-compliant full-speed device and On-The-Go (OTG) controller – has a dedicated DMA channel Separate PLLs for CPU and USB clocks Two I2C™ modules Two UART modules Two SPI modules Parallel Master and Slave Port (PMP/PSP) with 8-bit and 16-bit data and up to 16 address lines Hardware Real-Time Clock and Calendar (RTCC) Five 16-bit Timers/Counters – option to pair to create two 32-bit Timers Five capture inputs Five compare/PWM outputs Five external interrupt pins High-Speed I/O pins capable of toggling at up to 80 MHz High-current sink/source (18 mA/18 mA) on all I/O pins Configurable open-drain output on di...

The Pfannenberg Fan Heater are up to state-of-the-art heating technology and are used in electrical cabinets to maintain a minimum temperature in cold environments and/or to prevent the formation of condensation. The unique compact design enables the use in electrical cabinets with very limited space. Due to the fan and the high heat performance, the heaters are ideal for large electrical cabinets. Heating performance 500 W IP20 protection Black housing cURus approved EAC and CSA approved Operating temperature -40 degree C to 70 degree C Plastic housing protects against injuries

The Pfannenberg Fan Heater is ideal for use in larger electrical cabinets. It has an integrated fan that assists the natural convection, thus ensuring fast and even distribution of the heat in the electrical cabinet. The fan heaters are mainly used in combination with a thermostat or hygrostat to prevent low temperatures or high humidity in the electrical cabinet, preventing condensation from forming and thereby preventing corrosion or electrical short circuits. Heating performance 250 W IP20 protection Brightly anodised housing EAC and cURus approved Operating temperature -40 degree C to 70 degree C Plastic housing protects against injuries