Ø 4 mm component holder for experimental circuit board SET4
Ø 4 mm safety component holder for experimental circuit board SET4.
Component mounting: welded onto terminals supplied.
Protection level: IP2X.
Available in two-pole or four-pole versions.
For use in education, research and development etc.
Standards
IEC 61010 - CAT II
Ø 4 mm component holder for experimental circuit board SET4
Ø 4 mm safety component holder for experimental circuit board SET4.
Component mounting: welded onto terminals supplied.
Protection level: IP2X.
Available in two-pole or four-pole versions.
For use in education, research and development etc.
Standards
IEC 61010 - CAT II
The Gossen Metrawat Z50 plug inserts with 10m cable for PROFiTEST 0100S-II for PE measurements and EL1 adapter for testing 1-phase extension cables.
Measure contact voltage without tripping the switch
Touch voltage related to the nominal residual current measured with ⅓ of the nominal residual current
Tripping test with nominal fault current, tripping time measurement
Testing of systems or RCD circuit breakers with increasing residual current
The Chauvin Arnoux P012 series is the 3-point lead with 3 separated cables. The length of the cable is the 2.5m. This point lead used with CA 6116N and CA 6117.
Colour of the lead is the red, blue and green
The Electro PJP makes adapter for CEE plugs which have five phases and current capacity of 16 A and it have 4 mm female type banana socket. It is used to connect safely 4 mm banana leads to CEE 3P+N+E 6h, 415-volt, 16-ampere power socket and to measure voltages of 3-phase networks with analysers on long periods, to carry out reliable insulation tests on 3-phase networks with insulation testers. The operating temperature range of this adapter is 0 °C to +60 °C.
RoHS compliant
Weight is 0.32 kg
Reinforced insulation between the connections
The Gossen Metrawat Z50 adapter used for testing single-phase extension cables (coil cable). The adapter is scope of supply of PROFITEST MASTER series.
Measure contact voltage without tripping the switch
Tripping test with nominal fault current, tripping time measurement
Testing of systems or RCD circuit breakers with increasing residual current
Testing of RCD circuit breakers
Z503M PRO-CH Measuring Adapter
Single-phase, measuring adapter for the PROFiTEST INTRO, earthing contact plugs to three 4 mm safety plugs (black, blue, yellow-green), 230 V AC, touch-guarded, measuring category: CAT III, 300 V, 16 A.
AT16 DI 16A 3-Phase Current Adapters
Devices which are equipped with a 5-pole, 16 A / 6 h CEE plug can be quickly and efficiently tested with the AT16-DI CEE adapter.
Connect the adapter to a test instrument designed for testing portable devices in accordance with DIN VDE 0701-0702 in order to perform testing per DIN VDE 0750/IEC 601, which is equipped with an earthing contact outlet for connecting the device under test, and is capable of directly measuring protective conductor current.
The following tests can be performed on devices with CEE plugs with the help of the AT16-DI CEE adapter:
Testing of protective conductor continuity
Insulation test
Equivalent leakage current measurement
Differential current measurement, L1-L2-L3-N
Function test
Fluke TP165X remote probe
Slim line remote probe with built-in test button to facilitate one-handed measurements on Fluke 1650 & 1650B series electrical installation testers
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Multifunction Tester Accessories and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Multifunction Tester Accessories or any other product.
This depends on the Multifunction Tester Accessories individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Multifunction Tester Accessories and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Multifunction Tester Accessories.
Yes. We keep updating our stock frequently and if a product like Multifunction Tester Accessories is not in stock then we will let you know.