Rates
10+
£ 1.06
Products Found: 320
Showing Results For: Automotive Connector Terminals
Automotive Connector Terminals
FILTERS
Filters
Showing
1 -
New Items
New items
845240032, TE Connectivity
The TE Connectivity Automotive Terminal XRC PIN TERMINAL is with wire size 20-24 AWG and interface plating Ni Plated.
Terminal Type Pin Mating Pin Diameter 1.56 mm [ .061 in ] Terminal Transmits 0 – 24 A (Low Power)
New items
15344717, Delphi
Delphi Weather-Pack Sealed Crimp Terminals for Automotive Connector Assemblies
A range of sealed male pin and female sleeve crimp terminals for use with the Weather-Pack range of sealed automotive connectors. These Weather-pack crimp terminals are made from tin brass with a tin plating.
Stock numbers
801-0799
(female) and
801-0793
are for use with a cable range of 2.0 to 1.0 mm
2
Stock numbers
801-0803
(female) and
801-0806
are for use with a cable range of 0.80 to 0.50 mm
2
Stock numbers
896-1675
(female) and
896-01688
are for use with a cable range of 0.22 to 0.35 mm²
Stock numbers
896-1669
(female) and
896-1672
are for use with a cable range of 0.50 to 1.00mm²
Stock numbers
896-1666
(female) and
896-1663
are for use with a cable range of 1.50 to 2.00mm²
Stock numbers
896-1679
(female) and
896-1681
are for use with a cable range of 2.50 to 3.00mm²
For suitable crimp tool see stock number
801-0828
For terminal remover tool see stock number
801-0822
Delphi Weather-Pack Series Automotive Connectors
New items
12147656, Delphi
Delphi 2 Way Fuse Holder Terminals
A range of female terminals for the Delphi unsealed 2 pole fuse holders.These terminals have a cable acceptance range of 1.5mm to 2.5mm.
Delphi Fuse Holders
New items
172774-4, TE Connectivity
TE Connectivity MIC (Multiple Interlock Connectors) Series II Tab and Receptacle Contacts
A range of tab and receptacle crimp contacts for use with Series II MIC (Multiple Interlock Connector) connectors
TE Connectivity MIC (Multiple Interlock Connectors) Range
New items
171661-2, TE Connectivity
TE Connectivity Econoseal J Mark II (+) Series Connector Contacts
A range of socket and pin crimp contacts for the Econoseal J Mark II (+) series automotive wire connectors.
TE Connectivity Econoseal Connector System
Designed to meet the exacting requirements of the automotive industry, for a reliable sealed connector.
All connectors are designed to be used with thin walled non-irradiated PVC cables
Though designed initially for automotive applications, Econoseal III can be used in any industry where a reliable sealed connector is needed
New items
12033997, Delphi
Delphi Metri-Pack 630 Female Unsealed Terminals
A range of unsealed female terminals designed for use with the Metri-Pack 630 automotive connectors. The terminals are made from tinned brass with tin plating.
Stock number
896-1809
is for use with a cable range of 0.50 to 0.75mm²
Stock number
896-1805
is for use with a cable range of 1.00 to 2.00mm²
Stock number
896-1802
is for use with a cable range of 3.00 to 5.00mm²
Delphi Metri-Pack 630 Series Automotive Connectors
New items
770854-3, TE Connectivity
TE Connectivity AMPSEAL Contacts
AMPSEAL crimp contacts for use with the AMPSEAL sealed connector series. These AMPSEAL receptacle contacts have a wire size of 0.5-1.25mm
2
, an insulation diameter of 1.7 - 2.7mm and are available with tin or gold plating.
Note
For Crimp Tool see stock number
849-114
.
TE Connectivity AMPSEAL
AMPSEAL connectors are known for their rugged reliability even under high-temperature automotive and industrial applications. These heavy-duty connectors are not only waterproof, but submersible as well due to the two-way sealing of interface and wires.
New items
926983-2, TE Connectivity
TE Connectivity Econoseal E Series CI2 Pin Contacts
A range of CI2 pin contacts for use with the Econoseal E Series automotive connectors
TE Connectivity Econoseal Connector System
Designed to meet the exacting requirements of the automotive industry, for a reliable sealed connector.
All connectors are designed to be used with thin walled non-irradiated PVC cables
Though designed initially for automotive applications, Econoseal III can be used in any industry where a reliable sealed connector is needed
New items
New items
60151-6, TE Connectivity
TE Connectivity Special Blind-Mate Drawer Contacts
Special Blind-Mate drawer AMP-LEAF snap-in crimp contacts made from gold plated phosphor bronze with a gold flash plated solder tail.
TE Connectivity Special Blind-Mate Drawer Connectors
New items
0462-201-16141, Deutsch
Crimp Contacts for DT and HD Series Sealed Connectors
From Deutsch, these high-quality crimp contacts are for use with DT and HD series sealed connectors. These solid contacts have a copper alloy body with nickel plating and a radial crimp type.
Features & Benefits
Nickel plated copper crimp contact
Compatible with a wide range of Deutsch sealed connectors
Radial Crimp Type
Product Application Information
Characterised by their rugged thermoplastic housing, Deutsch connectors are heavy-duty and are commonly used in automotive applications.
Note
Pins must be ordered separately
These crimp contact sockets are compatible with the Deutsch HD20, HD30, DRC, DTM, DRB, STRIKE ranges of sealed connectors.
13 A current rating
Size 16 suitable for 16, 18 & 20 AWG wire sizes
V4 Contacts and Fillers
New items
15326268, Delphi
Delphi GT150 Sealed Terminals
A range of sealed male and female terminals designed for use with the Delphi GT150 range of automotive connectors.The terminals are made from tinned brass with tin plating.
Stock number
896-1928
(male) is suitable for a cable range of 0.35 to 0.50mm²
Stock number
896-1922
(male) is suitable for a cable range of 0.75 to 1.00mm²
Stock number
896-1821
(female) is suitable for a cable range of 0.35 to 0.50mm²
Stock number
896-1981
(female) is suitable for a cable range of 0.35 to 0.60mm²
Stock number
896-1984
(female) is suitable for a cable range of 0.75 to 0.80mm²
Stock number
896-1830
(female) is suitable for a cable range of 0.75 to 1.00mm²
Delphi GT150 Series Automotive Connectors