Rates
1+
£ 5.13
Products Found: 16
Showing Results For: Lighting & Electrical Cable
Lighting & Electrical Cable
FILTERS
Filters
Showing
1 -
New Items
New items
New items
New items
New items
20148564, Prysmian
Afumex LSX Screened Cable
Afumex LSX has a robust, lightweight construction allowing it to be used in many instances where traditionally bulky amoured cable would be installed. The original fully screened, multi-use, high performance wiring cable. ERA assessed for nail penetration test. The lightweight dressable construction offers a combination of rigidity and ease of bending which keeps its shape during installation and allows quick and easy termination using nylon glands. Afumex LSX should be used for power / energy and especially used in refurbishments as the cable is screened. Afumex LSX is ideal for usage in computer labs as it is a screened cable so doesn't give off any interference. Suitable for use in thin walls and partitions as per clause 522.6 of the 17th Edition IEE Wiring Regulations (1.0mm
2
to 2.5mm
2
).
BASEC approved
Additionally approved for 600/1000V rating per BASEC
Independently assessed by ERA for nail penetration tests
Low smoke emissions to BS EN 61034-2
Robust rigid thermoplastic Afumex sheath
Aluminium tape screen with 0.5mm² drain wire
-20 to +90°C temp. range
Standards
BS8436
New items
20145388, Prysmian
FP 200 Gold Fire Performance Cable
The FP 200 Gold is a hard skin standard fire resistant cable incorporating Prysmian's unique and hard wearing Insudite™ insulation. An excellent, high performance cable for use in fire detection and fire alarm systems, emergency systems and voice alarm systems.
·LSZH Sheath with Reduced Flame Propagation
·Laminated aluminium tape screen bonded to sheath and in contact with full size tinned anealed copper circuit protective conductor which provides automatic screen earthing
· The red cable is used for fire alarms and the white cable is used for emergency lighting.
·Easy to install, requires no bending tools
·Suitable for use in fire alarm wiring, emergency lighting or where mains cable is required to be screened
·Operating temperature range: -20 to +70°C
·Voltage rating 300V/500V
Standards
· BS7629-1 Construction of screened fire resistant cables
· BS EN 50200 PH30, PH60, PH120 and ANNEX E
· BS5839-1, 6, 8 & 9 standard fire resisting cable
· BS5266-1 standard fire resisting cable
· BS8519 Category 1 control cable
· London Underground 1.085 Approved Product Register (Section 12)
Standards
BS7629-1
New items
20145455, Prysmian
FP 200 Gold Fire Performance Cable
The FP 200 Gold is a hard skin standard fire resistant cable incorporating Prysmian's unique and hard wearing Insudite™ insulation. An excellent, high performance cable for use in fire detection and fire alarm systems, emergency systems and voice alarm systems.
·LSZH Sheath with Reduced Flame Propagation
·Laminated aluminium tape screen bonded to sheath and in contact with full size tinned anealed copper circuit protective conductor which provides automatic screen earthing
· The red cable is used for fire alarms and the white cable is used for emergency lighting.
·Easy to install, requires no bending tools
·Suitable for use in fire alarm wiring, emergency lighting or where mains cable is required to be screened
·Operating temperature range: -20 to +70°C
·Voltage rating 300V/500V
Standards
· BS7629-1 Construction of screened fire resistant cables
· BS EN 50200 PH30, PH60, PH120 and ANNEX E
· BS5839-1, 6, 8 & 9 standard fire resisting cable
· BS5266-1 standard fire resisting cable
· BS8519 Category 1 control cable
· London Underground 1.085 Approved Product Register (Section 12)
Standards
BS7629-1
New items
20145514, Prysmian
FP 200 Gold Fire Performance Cable
The FP 200 Gold is a hard skin standard fire resistant cable incorporating Prysmian's unique and hard wearing Insudite™ insulation. An excellent, high performance cable for use in fire detection and fire alarm systems, emergency systems and voice alarm systems.
·LSZH Sheath with Reduced Flame Propagation
·Laminated aluminium tape screen bonded to sheath and in contact with full size tinned anealed copper circuit protective conductor which provides automatic screen earthing
· The red cable is used for fire alarms and the white cable is used for emergency lighting.
·Easy to install, requires no bending tools
·Suitable for use in fire alarm wiring, emergency lighting or where mains cable is required to be screened
·Operating temperature range: -20 to +70°C
·Voltage rating 300V/500V
Standards
· BS7629-1 Construction of screened fire resistant cables
· BS EN 50200 PH30, PH60, PH120 and ANNEX E
· BS5839-1, 6, 8 & 9 standard fire resisting cable
· BS5266-1 standard fire resisting cable
· BS8519 Category 1 control cable
· London Underground 1.085 Approved Product Register (Section 12)
Standards
BS7629-1
New items
20145560, Prysmian
FP 200 Gold Fire Performance Cable
The FP 200 Gold is a hard skin standard fire resistant cable incorporating Prysmian's unique and hard wearing Insudite™ insulation. An excellent, high performance cable for use in fire detection and fire alarm systems, emergency systems and voice alarm systems.
·LSZH Sheath with Reduced Flame Propagation
·Laminated aluminium tape screen bonded to sheath and in contact with full size tinned anealed copper circuit protective conductor which provides automatic screen earthing
· The red cable is used for fire alarms and the white cable is used for emergency lighting.
·Easy to install, requires no bending tools
·Suitable for use in fire alarm wiring, emergency lighting or where mains cable is required to be screened
·Operating temperature range: -20 to +70°C
·Voltage rating 300V/500V
Standards
· BS7629-1 Construction of screened fire resistant cables
· BS EN 50200 PH30, PH60, PH120 and ANNEX E
· BS5839-1, 6, 8 & 9 standard fire resisting cable
· BS5266-1 standard fire resisting cable
· BS8519 Category 1 control cable
· London Underground 1.085 Approved Product Register (Section 12)
Standards
BS7629-1
New items
20145519, Prysmian
FP 200 Gold Fire Performance Cable
The FP 200 Gold is a hard skin standard fire resistant cable incorporating Prysmian's unique and hard wearing Insudite™ insulation. An excellent, high performance cable for use in fire detection and fire alarm systems, emergency systems and voice alarm systems.
·LSZH Sheath with Reduced Flame Propagation
·Laminated aluminium tape screen bonded to sheath and in contact with full size tinned anealed copper circuit protective conductor which provides automatic screen earthing
· The red cable is used for fire alarms and the white cable is used for emergency lighting.
·Easy to install, requires no bending tools
·Suitable for use in fire alarm wiring, emergency lighting or where mains cable is required to be screened
·Operating temperature range: -20 to +70°C
·Voltage rating 300V/500V
Standards
· BS7629-1 Construction of screened fire resistant cables
· BS EN 50200 PH30, PH60, PH120 and ANNEX E
· BS5839-1, 6, 8 & 9 standard fire resisting cable
· BS5266-1 standard fire resisting cable
· BS8519 Category 1 control cable
· London Underground 1.085 Approved Product Register (Section 12)
Standards
BS8436
New items
New items
20163875, Prysmian
318-B LSZH Cable H05Z1Z1-F
Features and Benefits
Flexible cables designed to minimise the risk from fire
Excellent resistance to ignition and flame spread, producing very low levels of smoke and virtually no acidic gases when burnt
Temp rating: -15 to +90°C
Applications:
Designed for supply leads for medium duty domestic and office appliances
Lighting fittings
Portable appliances in a range of public access buildings and industrial complexes
Note
The number of strands used in the construction of the cores is nominal and may vary.
Approvals
BS6500
Standards
BSEN50265-2-1, BSEN50267-2-1, BSEN50268-2
Standards
BS EN 50525-3-11
New items
20163902, Prysmian
318-B LSZH Cable H05Z1Z1-F
A flexible cable with excellent fire resistance designed for use in public buildings. They are low smoke, zero halogen and flame retardant reducing the hazards caused by fire and ensuring the fire does not get worse.
The thermoplastic sheath allows for quick and easy installation and allows for the cable to withstand mechanical stresses. Due to the advanced sheathing technology, the cable sheath strips easily.
Features and Benefits
Temperature range: -10 °C to +70 °C
Bending radius r-4D
Medium mechanical impact
Fire performance UNE EN 60332-1-2 and UNE EN 60332-3-24
Flexible
Low smoke emissions
Halogen free
Easy strip sheath
Product Application Information
Designed for supply leads for medium duty domestic and office appliances
Lighting fittings
Portable appliances in a range of public access buildings and industrial complexes
Ideal for use in domestic and commercial premises for circuit wiring. Fixed installation in dry or damp premises on walls, boards or trays, in channels or embedded in plaster.
Note
The number of strands used in the construction of the cores is nominal and may vary.
Standards
EN 50525-1, BS EN 50525-1
Approvals
HAR approved AENOR: EN 50525-3-11
Standards
BS EN 50525-3-11