What are the shipping charges for products like Heat-Shrink & Cold-Shrink Sleeves?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

Where are your products like Heat-Shrink & Cold-Shrink Sleeves manufactured?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Heat-Shrink & Cold-Shrink Sleeves?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

How long will it take to receive the order that I placed for Heat-Shrink & Cold-Shrink Sleeves?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

Are your products Heat-Shrink & Cold-Shrink Sleeves in stock?

Yes. We keep updating our stock frequently and if a product like Heat-Shrink & Cold-Shrink Sleeves is not in stock then we will let you know.

Heat-Shrink And Cold-Shrink Sleeves | Packaging Sleeves | Heat Shrink

New items

192991-0015/TNA16CA02-18L, ITT Cannon

Rear Housing Available in heat-shrink or threaded versions for use with plastic flexible conduit. Can be fitted in place of the seal securing nut on respective plugs and sockets. Neptune Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Product Detail

New items

HSB 250-6, Thomas & Betts

Shrink-Kon Heat Shrink Tube® HSB Box Heat shrink tube from dispenser box PLG heat shrink tube in various colours and sizes Indispensible for insulation, repairs and labelling in both pastime and professional applications HSB box is stable, space-saving and handy Polyolefin cross linked by irradiation, thin-walled Temperature range -55° → +125 °C Shrink capacity 2:1 Shrink temperature > +110 °C Inner diameter from 0.6 mm → 25.4 mm Boxes are stackable Cutting length auxiliary dimension Simple handling due to clear labelling Inspection window for checking contents and Euro hanger for hanging Single material = problem-free disposal Dielectric strength = 20 kV/mm Product no. Nominal Ø before shrinkage Ø after shrinkage Wall thickness after max. shrinkage Includes per box / m HSB46 1.2 mm 0.6 mm 0.4 mm 12 HSB63 1.6 mm 0.8 mm 0.4 mm 12 HSB93 2.4 mm 1.2 mm 0.5 mm 11.5 HSB125 3.2 mm 1.6 mm 0.5 mm 11.5 HSB187 4.7 mm 2.4 mm 0.6 mm 9.5 HSB250 6.4 mm 3.2 mm 0.6 mm 7.5 HSB375 9.5 mm 4.7 mm 0.6 mm 6.5 HSB500 12.7 mm 6.4 mm 0.6 mm 6 HSB750 19.1 mm 9.5 mm 0.8 mm 5 HSB1000 25.4 mm 12.7 mm 0.9 mm 3.3

Product Detail

New items

CGPT-25.4/12.7-4-FSP, TE Connectivity

CGPT Heat-shrink Tubing Flexible, irradiated polyolefin tubing that is self-extinguishing as per UL 224 (excluding transparent tubing) and with a shrink ratio of 2:1 or 3:1. The tubing is resistant to most common solvents and chemicals. This heat-shrink tubing meets the most demanding resistance requirements normally encountered in an industrial context. There are many applications for the heat-shrink including strain relief, electrical insulation, and identification of cables and wires. Features and Benefits Available with a shrink ratio of 2:1 or 3:1 Durable and flexible Good chemical and solvent resistance Excellent physical and electrical performance Flame retardant (excluding transparent products)

Product Detail

New items

HSB 46-6, Thomas & Betts

Shrink-Kon Heat Shrink Tube® HSB Box Heat shrink tube from dispenser box PLG heat shrink tube in various colours and sizes Indispensible for insulation, repairs and labelling in both pastime and professional applications HSB box is stable, space-saving and handy Polyolefin cross linked by irradiation, thin-walled Temperature range -55° → +125 °C Shrink capacity 2:1 Shrink temperature > +110 °C Inner diameter from 0.6 mm → 25.4 mm Boxes are stackable Cutting length auxiliary dimension Simple handling due to clear labelling Inspection window for checking contents and Euro hanger for hanging Single material = problem-free disposal Dielectric strength = 20 kV/mm Product no. Nominal Ø before shrinkage Ø after shrinkage Wall thickness after max. shrinkage Includes per box / m HSB46 1.2 mm 0.6 mm 0.4 mm 12 HSB63 1.6 mm 0.8 mm 0.4 mm 12 HSB93 2.4 mm 1.2 mm 0.5 mm 11.5 HSB125 3.2 mm 1.6 mm 0.5 mm 11.5 HSB187 4.7 mm 2.4 mm 0.6 mm 9.5 HSB250 6.4 mm 3.2 mm 0.6 mm 7.5 HSB375 9.5 mm 4.7 mm 0.6 mm 6.5 HSB500 12.7 mm 6.4 mm 0.6 mm 6 HSB750 19.1 mm 9.5 mm 0.8 mm 5 HSB1000 25.4 mm 12.7 mm 0.9 mm 3.3

Product Detail

New items

RS_399-940, RS PRO

RS Pro Clear Flexible Polyolefin Heat Shrink Tubing, 2:1 Ratio From RS Pro a range of high quality, easy to use heat shrink tubing made from flexible, transparent polyolefin. This clear heat shrink tubing allows marker tags and identification marks on cables and wires to be viewed through the tubing after it has been applied. The shrink ratio of this clear heat shrink tubing is 2:1 which means it shrinks to half of its original diameter and is SAE-AMS-DTL-23053 approved What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation. Features and Benefits of Flexible Polyolefin Heat Shrink Tubing Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially to half its original diameter hence the ratio of 2:1. Flexible Polyolefin tubing has the following properties: Very flexible 2:1 shrinkage ratio, shrinks to half its original diameter Operating temperature range of -55 to +135°C Shrink temperature of 110°C minimum Excellent electrical insulation properties Resistant to common fluids and solvents Excellent abrasion resistance SAE-AMS-DTL-23053/5 Class 2 approved What is Polyolefin Heat Shrink Tubing Used For? This polyolefin heat-shrinkable tubing is very versatile and is used in military and aerospace applications, industrial machinery, electronics and construction machinery. Heat shrink tubing is used for protect...

Product Detail

New items

RS_241-7321, RS PRO

RS Pro Adhesive Lined Polyolefin Heat Shrink Tubing with 3:1 Shrink Ratio From RS Pro a range of high quality, easy to use adhesive lined or dual wall heat-shrink tubing made from flexible, flame retardant Polyolefin. This heat shrinkable tubing has a high shrink ratio of 3:1 which means it shrinks to a third of its original diameter and is ideal for covering irregular or awkward shapes. The adhesive lining of this tubing, when melted, provides a watertight sealing and encapsulates wire joints. What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to provide protection and insulation. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state How to use Heat Shrink Tubing The diameter of the wire or cable is measured and the correct sized heat shrink tubing selected. A piece tubing is cut to size which is long enough to cover the connection or joint after heating. This then slides onto the wire. After the cable or wire has been joined the heat shrink tubing is moved over the joint and heated with a heat gun until it forms a tight wrapping around the joint Features and Benefits of Adhesive Lined Flexible Polyolefin Heat Shrink Tubin Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially a third of its original diameter hence the ratio of 3:1. This tube has an inner adhesive lining, which, when heated, melts to form a watertight sealing around the joint. This type of heat shrink is also called dual wall heat shrink. Very flexible Adhesive lined for waterproof sealing Flame retardant Good ...

Product Detail

New items

RS_241-7545, RS PRO

RS Pro Adhesive Lined Polyolefin Heat Shrink Tubing with 3:1 Shrink Ratio From RS Pro a range of high quality, easy to use adhesive lined or dual wall heat-shrink tubing made from flexible, flame retardant Polyolefin. This heat shrinkable tubing has a high shrink ratio of 3:1 which means it shrinks to a third of its original diameter and is ideal for covering irregular or awkward shapes. The adhesive lining of this tubing, when melted, provides a watertight sealing and encapsulates wire joints. What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to provide protection and insulation. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state How to use Heat Shrink Tubing The diameter of the wire or cable is measured and the correct sized heat shrink tubing selected. A piece tubing is cut to size which is long enough to cover the connection or joint after heating. This then slides onto the wire. After the cable or wire has been joined the heat shrink tubing is moved over the joint and heated with a heat gun until it forms a tight wrapping around the joint Features and Benefits of Adhesive Lined Flexible Polyolefin Heat Shrink Tubin Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially a third of its original diameter hence the ratio of 3:1. This tube has an inner adhesive lining, which, when heated, melts to form a watertight sealing around the joint. This type of heat shrink is also called dual wall heat shrink. Very flexible Adhesive lined for waterproof sealing Flame retardant Good ...

Product Detail

New items

RS_417-9548, RS PRO

Pre-Cut Sleeving 2:1 Zero Halogen Heatshrink that exceeds the requirements of London Underground and the MOD and is recommended where fire safety is of prime importance. Areas such as public buildings, public transport, underground rail systems, submarines, hospitals and airports, etc. Highly flame retardant with a flame temperature index of over 350°C Totally halogen free Very low smoke, meets LUL requirements No toxic fume emission High oxygen index of over 40% Ideal for use in insulation, cable protection, cable identification, and encapsulation on connectors Used as a cover to up-grade cable to meet full fire safety standards Pre-Cut 300mm lengths

Product Detail

New items

RS_700-4658, RS PRO

RS Pro General Purpose Flexible Polyolefin Heat Shrink Tubing, 2:1 Ratio From RS Pro a range of high quality, easy to use general purpose heat shrink tubing made from flexible, flame retardant Polyolefin. This heat shrinkable tubing has a low shrink temperature of just 70°C (minimum) and a shrink ratio of 2:1 which means it shrinks to half of its original diameter What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation. How to use Heat Shrink Tubing The diameter of the wire or cable is measured and the correct sized heat shrink tubing selected. A piece of the tube is cut to size which is long enough to cover the connection or joint after heating. This then slides onto the wire. After the cable or wire has been joined the piece of heat shrink shrinkable tube is moved over the joint and heated with a heat gun until it shrinks and forms a tight wrapping around the joint Features and Benefits of Flexible Polyolefin Heat Shrink Tubing Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially to half its original diameter hence the ratio of 2:1. Flexible Polyolefin tubing has the following properties: Very flexible 2:1 shrinkage ratio, shrinks to half its original diameter Flame retardant (apart from transparent version) Operating temperature range of -55 to +125°C Low heat shrink temperature of 70°C (minimum) Mini...

Product Detail

New items

RS_417-7211, RS PRO

RS Pro Flexible Polyolefin Heat Shrink Tubing with 2:1 Shrink Ratio From RS Pro a range of high quality, easy to use heat shrink tubing made from flexible, flame retardant Polyolefin. The shrink ratio of this heat shrink tubing is 2:1 which means it shrinks to half of its original diameter. This heat shrinkable tubing meets the requirements of a wide range of high tech and industrial standards including SAE-AMS-DTL-23053/5 class 1 What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation. Features and Benefits of Flexible Polyolefin Heat Shrink Tubing Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially to half its original diameter hence the ratio of 2:1. Flexible Polyolefin tubing has the following properties: Very flexible 2:1 shrinkage ratio, shrinks to half its original diameter Flame retardant Operating temperature range of -55 to +135°C and up to 200°C for short time durations Shrink temperature of 90°C minimum Excellent electrical insulation properties Resistant to common fluids and solvents Meets requirements of SAE-AMS-DTL-23053/5 Class 1 What is Polyolefin Heat Shrink Tubing Used For? This polyolefin heat-shrinkable tubing is very versatile and is used in military and aerospace applications, automotive applications, industrial machinery, electronics and construction machinery. Heat shrink tu...

Product Detail

New items

RS_562-662, RS PRO

RS PRO Adhesive Lined, Halogen Free, Polyolefin Heat Shrink Tubing with 3:1 Shrink Ratio From RS PRO a range of high quality, easy to use adhesive lined or dual wall heat-shrink tubing made from flexible, halogen-free/zero-halogen, flame retardant, dual walled polyolefin. This heat shrink tubing has a high shrink ratio of 3:1 which means it shrinks to a third of its original diameter and is ideal for covering irregular or awkward shapes. The adhesive lining of this tubing, when melted, provides a watertight sealing and encapsulates wire joints. This heat shrink is halogen-free which means, when it overheats or burns, it produces less smoke and fewer toxic gasses making it ideal for use in environments where safety is an important consideration, especially if there is a risk of fire or electrical circuits overheating. What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to provide protection and insulation. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Features and Benefits of Adhesive Lined Flexible Polyolefin Heat Shrink Tubing Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated it shrinks radially a third of its original diameter hence the ratio of 3:1. This heat shrink tubing has an inner adhesive lining, which, when heated, melts to form a watertight sealing around the joint. This type of heat shrink is also called dual wall heat shrink. Very flexible Halogen-free with reduced acid gas emission and smoke generation Flame retardant Adhesive lined for waterproof sealing 3:1 shrink ratio for easy install...

Product Detail

New items

RS_399-669, RS PRO

RS Pro Flexible Polyolefin Heat Shrink Tubing with 2:1 Shrink Ratio From RS Pro a range of high quality, easy to use heat shrink tubing made from flexible, flame retardant Polyolefin. The shrink ratio of this heat shrink tubing is 2:1 which means it shrinks to half of its original diameter. This heat shrinkable tubing meets the requirements of a wide range of high tech and industrial standards including SAE-AMS-DTL-23053/5 class 1 What is Heat Shrink Tubing? Heat shrink tubing is a type of extruded plastic tubing that can be cut to size and fitted over a wire or cable joint to protect and insulate the connection. When heated is applied the tubing shrinks permanently providing a protective seal. The amount it shrinks depends on its shrink ratio. When you buy the tubing it is in its expanded state, this expanded tubing has memory so when it is heated it returns to its original state. Larger shrink ratios are required to cover materials with a greater size variation. Features and Benefits of Flexible Polyolefin Heat Shrink Tubing Flexible Polyolefin is a material derived from polyethylene and is one of the most commonly used insulating materials being both highly flexible, fast shrinking and durable. When heated this polyolefin tubing shrinks radially to half its original diameter hence the ratio of 2:1. Flexible Polyolefin tubing has the following properties: Very flexible 2:1 shrinkage ratio, shrinks to half its original diameter Flame retardant Operating temperature range of -55 to +135°C and up to 200°C for short time durations Shrink temperature of 90°C minimum Excellent electrical insulation properties Resistant to common fluids and solvents Meets requirements of SAE-AMS-DTL-23053/5 Class 1 What is Polyolefin Heat Shrink Tubing Used For? This polyolefin heat-shrinkable tubing is very versatile and is used in military and aerospace applications, automotive applications, industrial machinery, electronics and construction machinery. Heat shrink tu...

Product Detail