Showing Results For: Batteries & Chargers
Batteries & Chargers
Popular Items
Popular items
Popular items
Yuasa REC14-12 12V Lead Acid Battery, 13Ah
Yuasa RE Series VRLA Battery
High cyclic performance VRLA battery
Heavy duty lead Calcium Grids for superior cyclic life
Double cycle life vs standard VRLA battery
Absorbed Glass Mat construction with no free acid
Gas recombination
Excellent recovery from deep discharge
Operation in any orientation (excluding continuous inverted use)
Note
Suitable for Cyclic and Standby use
Popular items
Popular items
Enersys Odyssey RSAMP37104 Lead Acid Battery - 12V, 95Ah
Enersys Odyssey Extreme Battery
Whether for everyday or emergency use, todays vehicles are loaded with more electronics than would have been imaginable just a few years ago. ODYSSEY batteries have been designed to keep up with the changes. Because their plates are made of pure virgin lead (unlike the lead alloy in most batteries), we can pack in more plates. And more plates mean more plate surface area, and much more power - twice the overall power and three times the life of conventional batteries - up to 400 cycles at 80% depth of discharge!
ODYSSEY batteries are perfect for a range of applications, including automotive, marine, commercial, and power sports.
No need to add water
Group 48 & 98R (Euro L3)
Note
ODYSSEY batteries deliver the massive starting power, rapid recovery, and amazing deep cycling capability that todays vehicles demand
Popular items
Saft LS145003PFRP Lithium Thionyl Chloride AA Battery
PCB Mounting Lithium Thionyl Chloride Cells
All cells are hermetically sealed in stainless steel cans (low magnetic signature and superior resistance to atmospheric corrosion)
For series or parallel connections of more than one cell refer to the data sheet - do not solder directly to the cell - used tabbed versions instead.
Operating temperature -60ﾟC → +85ﾟC
Note
Due to the high terminal voltage 3.6V they are not suitable as direct replacements for other battery technologies in the same can sizes
Approvals
Compliant with IEC 60086-4 safety standard
Warning
Fire, explosion and burn hazard
Do not recharge, short circuit, crush, disassemble, heat above 100ﾟC (212ﾟF), incinerate
Popular items
Popular items
Panasonic CR2016 3V Lithium Manganese Dioxide Coin Button Battery
Lithium Coin Button Battery, CR Series
CR type lithium button batteries offer long shelf life and are ideal for items such as watches, memory support and cameras. All RS coin cells are mercury free.
Key Features
Non-rechargeable lithium coin cells
CR type suitable for intermittent high load applications
Long shelf life
Commonly used in applications like watches, calculators and cameras
Coin & Button Cells, Lithium
All cells in this range have a voltage of 3V.
Technical specification for all types
Type
Diameter (mm)
Height (mm)
CR1025
10.0
2.5
CR1216
12.5
1.6
CR1220
12.5
2.0
BR1225
12.5
2.5
CR1612
16
1.2
CR1616
16
1.6
CR1620
16
2.0
CR1632
16
3.2
CR2016
20
1.6
CR2025
20
2.5
BR/CR2032
20
3.2
BR2325
23
2.5
BR/CR2330
23
3.0
CR2354
23
5.4
CR2450
24.5
5.0
CR2477
24.5
7.7
CR3032
30
3.2
Popular items
Tadiran SL750/S 3.6V Lithium Thionyl Chloride 1/2 AA Battery, 1.1Ah
Tadiran Lithium Thionyl Chloride Cells
A non-rechargeable 3.6V lithium thionyl chloride battery with excellent memory back-up characteristics
Designed for high temperature applications
Long term high performance
Excellent memory back-up characteristics
Extended temperature range
Hermetically sealed casing
Optimized voltage level after storage, reducing passivation problems
Best if stored no more than 3 years
Typical applications:
Security and alarm systems, door lockers, onboard computers, locating equipment for vehicles, sub-sea transponders and mobile data carriers
Key Features
10 year storage capability
Low self discharge (1% or less per year) at 20ﾟC
Approvals
Compliant with IEC 60086-4 safety standard
Popular items
TecMate TA20 Battery Tester For Various Battery
TestMate AUTO - 200Ah battery Tester
TestMate 200Ah provides within seconds a professional assessment of the state of health, state of charge and CCA capability of a 12V battery.
Tests the correct operation of the 12V charging/starting system of the vehicle
Compact, light, and can be used in the workshop or at the sales counter
Suitable for car, van, marine and all other 12V starter batteries up to 200Ah
For all battery technologies: STD, AGM, GEL
Easy to use: select battery type, capacity, then TEST
Popular items
Saft LS14250MLB 3.6V Lithium Thionyl Chloride 1/2 AA Battery, 1200mAh
Meter Lithium Battery
1/2 AA lithium TCL cell with ABS plastic housing with flying leads and connector for easy integration into utility meters/automatic meter reading devices and others.
All cells are hermetically sealed in stainless steel cans (low magnetic signature and superior resistance to atmospheric corrosion)
For series or parallel connections of more than one cell refer to the data sheet - do not solder directly to the cell – used tabbed versions instead.
Operating temperature -60ﾟC to + 85ﾟC
1/2 AA lithium-thionyl chloride LS 14250 component cell
Battery with ABS plastic enclosure
Easy integration into utility meters
High voltage, stable during most of the applications lifetime
Wide operating temperature range
Utility metering
Automatic meter reading
Alarms and security devices
Memory back-up
Professional electronics
Main applications:
Note
Due to the high terminal voltage 3.6V they are not suitable as direct replacements for other battery technologies in the same can sizes
Approvals
Compliant with IEC 60086-4 safety standard
Popular items
Keystone A, AA Battery Contact, Coil Spring Contact
Contacts for battery types A; AA / AAA; AAAA; N
Single contacts for wires type A; AA (5224, 5202) or AAA; AAAA; N (5225, 52039)
Double contacts for wires type A; AA (5212) or AAA; AAAA; N (5213 with pole + right or 5214 with pole + left)
Compact size: 8 mm
2
for 5225 // 5204 and 10.8 mm
2
for 5224 // 5202.
Material:
steel spring, nickel base
Popular items
Battery Clamp & Clip Cord Set for AccuMate 612, OptiMate III, OptiMate PRO Charger
Battery Clamp/ Clip Cord Set
For Optimate III, Acumate 612 and Optimate Pro.
AWG # 18UL/CSA approved SPT-2 cable
Chromed metal clamps resist corrosion
OptiMate and AccuMate Accessories
New Items
New items
Plug in croc clips 12V 2A
PC series 3 stage chargers are new switching type devices which operate without the use of transformers I C s control and regulate current and voltage and automatically switch from the higher fast charge voltage to the lower float voltage when batteries are very close to being fully charged At the float voltage it is safe to leave the battery connected to the charger indefinitely making charging pretty much fool-proof In the fast charge mode voltage goes up to 2 45V - 0 05V before switching in the float charge mode voltage is held between 2 25- 2 30V cell
New items
Lithium Charger 12V 10 Amp
The PSC-2410000-LiFe-EU is part of our LiFe series of 3-step LiFEPO4 battery chargers The LiFe Series of lithium chargers feature an intelligent 3-step charging logic which can help charge even the deepest of discharged batteries To maximize battery performance and battery life the optimized charging technology makes the best possible use of the capabilities of the batteries to be charged The 8-cell 10000mA charger has been medically certified to both EN60601-1 3 1 and EN60601-1-2 4 making it the ideal choice for any medical application or anyone looking for a top quality charger The PSC-124000-LiFe battery charger is manufacture using the highest quality components and manufacturing process
New items
New items
New items
Hioki DT4900 Software for Battery Tester 3554
Hioki Communication Package (USB)
Communication software for the DT4282 Digital Multimeter
Communication cable
Communication adapter
PC software
Supplied with
Instruction manual
New items
Coin Cell Silver Oxide 1.55V 28mAh
Silver oxide batteries are suitable for quartz watches, medical devices and precision instruments. All models are 100% made in Japan, and environmentally friendly (0% mercury).
High energy density
High energy density has been achieved owing to the Murata's original high-precision material-mixing technology. The use of antioxidant, high performance separators also contributes to improved storage characteristics.
Excellent stable discharge characteristics Constant voltage output is available during the discharging.
Excellent leakage resistance Murata-unique sealing structure, coupled with special sealing- material treatment, has helped accomplish the excellent leakage resistance.
Applications
Medical
Capsule endoscopy
Insulin pumps
CGM(Continuous Glucose Monitoring)
Drug delivery systems
IoT/Others
Tracking devices
New items
New items
Keystone 9V PP3 Battery Strap & Lead, Press Stud Contact
PP3 coupler finger-proof contact
Isolated safety coupler to prevent short-circuiting as well as damage to contacts.
Moulded in polypropylene housing.
Nickel-plated brass contacts.
Dimensions (mm):
L 24.6 x W 12.8
Wire length:
150 mm
New items
Takachi Electric Industrial 2 x AA Battery Holder, Button & Leaf Spring Contact
Battery holder for N, AAA, AA, C, D cell.
Lead wire type = 23 size.
P.C pin type = 6 size
Snap type = 7 size
New items
Battery, 3 V, CR2032R-HE1, Lithium Manga
The High Drain lithium coin batteries feature excellent high-current discharge performance to support LPWA devices, as well as outdoor infrastructures and environment monitoring sensors.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Batteries & Chargers and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Batteries & Chargers or any other product.
This depends on the Batteries & Chargers individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Batteries & Chargers and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Batteries & Chargers.
Yes. We keep updating our stock frequently and if a product like Batteries & Chargers is not in stock then we will let you know.