ENM - T50 Series Hour Meters & Accessories
Professional range of ENM electronic hour meters and accessories from the T50 series. The hour meters are low cost, reliable and incorporate the latest state of the art in electronics. Each counter has an electromechanical wheel type indicator that is used to store accumulated hours. All the counters are IP65 rated and designed to be used on test and recording equipment or any application where time in use is determined. Accessories include gaskets and mounting brackets.
Low power consumption
IP65 rated
High impact, tamperproof plastic case
Solid state electronic drive circuit
A103 Series Timers
The A103 series of timers incorporate large 7-digit LCD displays with backlighting. The timers include matching indicators for count totalization and rate metering. The timers have two battery slots allowing the battery changeover without the loss of memory.
Cost effective
Compact elapsed time indicator
Large 7-digit display with backlighting
Veeder-Root Counters
ENM - T50 Series Hour Meters & Accessories
Professional range of ENM electronic hour meters and accessories from the T50 series. The hour meters are low cost, reliable and incorporate the latest state of the art in electronics. Each counter has an electromechanical wheel type indicator that is used to store accumulated hours. All the counters are IP65 rated and designed to be used on test and recording equipment or any application where time in use is determined. Accessories include gaskets and mounting brackets.
Low power consumption
IP65 rated
High impact, tamperproof plastic case
Solid state electronic drive circuit
ENM - T50 Series Hour Meters & Accessories
Professional range of ENM electronic hour meters and accessories from the T50 series. The hour meters are low cost, reliable and incorporate the latest state of the art in electronics. Each counter has an electromechanical wheel type indicator that is used to store accumulated hours. All the counters are IP65 rated and designed to be used on test and recording equipment or any application where time in use is determined. Accessories include gaskets and mounting brackets.
Low power consumption
IP65 rated
High impact, tamperproof plastic case
Solid state electronic drive circuit
Hour Meter, Codix 130 series
Very good readability due to leading zero blanking and 8mm high, 8 digit LCD
Bezels for screw mounting included
Easy to use, no programming required
Panel cut-out: 22.2mm x 45mm
Operating temperature: -10 → +60°C
Manual and electrical reset
Mode selection (A) 99999h 59m or 99999,99h
Mode selection (B) 9999h 59m 59sec or 9999999,9sec
IP40 Rated
Kubler Panel Mounting 24x48
IP67 Rated, Panel/Base Mount - HK47
Non-resettable - internal circuit generates pulses every 36s for metering
Decimal digits red, others white
Picture shows base mount only
Kuebler HK17 Series - Hour Meters
HK17 Hour Meters feature a very high shock resistance, they can be used in many different fields of application.
7-digit Hour Meter
without reset
Hight of figures 3.8 mm
High shock resistance
Small dimensions
Cut out size 22x33 mm
Protection IP65 on the front side
Different voltage types available:
- 10-30V DC - stock no.
309-6060
- 100-130V (60Hz) - stock no.
915-5935
- 187-264V (50Hz) - stock no.
309-6098
- 100-130V (60Hz) - stock no.
915-5910
Applications:
- General time measurement
- Maintenance intervals for medical equipment
- UV lamps
- Display panels in vehicles
Combination Time and Pulse Meter- HC77
The Counter Combinations HC 77 an hour meter and a totaliser. They can be controlled both simultaneously and separately.
These panel mount counters have a reduced mounting depth and can be used in many different fields of application.
Counts on/off timing and total hours
Indicating range timer: 99999.99h
Indicating range totaliser: 9999999
High shock resistance
Data retention if power is lost
Long service life
IP52 protection class (front side)
Applications:
General counting
Service interval for measurement systems
Small appliances
UV lamps
Display panels in cars
Approvals
UL / C-UL recognised
Combination Time and Pulse Meter- HC77
The Counter Combinations HC 77 an hour meter and a totaliser. They can be controlled both simultaneously and separately.
These panel mount counters have a reduced mounting depth and can be used in many different fields of application.
Counts on/off timing and total hours
Indicating range timer: 99999.99h
Indicating range totaliser: 9999999
High shock resistance
Data retention if power is lost
Long service life
IP52 protection class (front side)
Applications:
General counting
Service interval for measurement systems
Small appliances
UV lamps
Display panels in cars
Approvals
UL / C-UL recognised
Pulse Counters - Type 192
Single-channel Count Module Type 192 for PCB mounting, with a large voltage ranges and 6-digit LCD display.
Extremely robust as a result of its wide temperature range, the module is ideally suited for use in many application areas.
Single-channel Input Counter
Count frequency up to 100 Hz
6-digit LCD display, 5 mm high
Low operating current
Wide operating voltage and temperature range
High shock and vibration resistance
Non-volatile memory (no battery)
Electrical reset
Very high reliability
Kubler PCB Mounting
Trumeter 711/731 Series Hour Meters
Professional range of 711/731 series electromechanical hour meters from Trumeter. These AC 7 figure hour meters are available in the standard industry housing, 2 hole rectangular, flush round and flush rectangular. All models are highly reliable and excellent quality.
Various voltage inputs
Large figures
UL Recognized
Flush Mount DIN Standard - H57
Hour Meter Series H57 feature a very high shock resistence and they have a reduced mounting depth.
7-digit Hour Meter
Non resettable
High shock resistance
Data retention in case of power failure
Small mounting depth
Type H57 (48x48mm)
Different voltage types available:
- 10-30V DC - stock no.
297-1156
- 100-130V (50Hz) - stock no.
297-1162
- 100-130V (60Hz) - stock no.
915-5929
- 187-264V (50Hz) - stock no.
297-1178
Applications:
- General counting
- Service interval measurement for:
- Respiratory ventilators
- Oxygen machines
- Dialysis machines
Approvals
UL recognised component for Canada and US
Approvals
UL/C-UL recognised for Canada
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Hour Meters and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Hour Meters or any other product.
This depends on the Hour Meters individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Hour Meters and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Hour Meters.
Yes. We keep updating our stock frequently and if a product like Hour Meters is not in stock then we will let you know.