Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 362

Showing Results For: Vibration Sensors

Vibration Sensors


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Banner
Rohs Verified
QM30VT1, Banner
91 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 275.73
Rohs Verified
SOLUTIONSKIT2-VIBEMETRIC, Banner
88 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 3025.89
Rohs Verified
DX80N2Q45VTP-NB, Banner
89 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 307.72
TE Connectivity Measurement Specialties
1-1002145-0, TE Connectivity Measurement Specialties
535 In Stock
Check Stock & Lead Times Packaging Options
250 +
£ 4.95
TE Connectivity Measurement Specialties
3-1003702-7, TE Connectivity Measurement Specialties
77 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 304.30
TE Connectivity Measurement Specialties
1-1003702-7, TE Connectivity Measurement Specialties
95 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 261.15
TE Connectivity Measurement Specialties
2-1003702-7, TE Connectivity Measurement Specialties
44 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 280.77
ifm efector, inc.
VNB211, ifm efector, inc.
79 In Stock
Check Stock & Lead Times Packaging Options
ifm efector, inc.
VNB001, ifm efector, inc.
78 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 597.38
ifm efector, inc.
VKV022, ifm efector, inc.
45 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 291.57
ifm efector, inc.
VTV122, ifm efector, inc.
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 292.77
ifm efector, inc.
VKV021, ifm efector, inc.
3 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 267.76
Micro-Measurements (Division of Vishay Precision Group)
MMF404442, Micro-Measurements (Division of Vishay Precision Group)
26 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 93.58
Analog Devices Inc.
ADCMXL1021-1BMLZ, Analog Devices Inc.
60 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 239.43
10 +
£ 229.31
25 +
£ 224.25
Banner Engineering Corporation
DX80N9X1W-CM1L, Banner Engineering Corporation
34 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 699.74
Rohs Verified
VS-BV203-B, KEMET
52 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 131.42
2 +
£ 124.41
Rohs Verified
VS-JV10A, KEMET
57 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 290.79
2 +
£ 275.37
Analog Devices Inc.
ADCMXL3021BMLZ, Analog Devices Inc.
9 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 307.16
10 +
£ 281.57
Amphenol Wilcoxon Sensing Technologies
PCH420V-M12-HZ, Amphenol Wilcoxon Sensing Technologies
6 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 959.29
Amphenol Wilcoxon Sensing Technologies
PC420VP-10-IS, Amphenol Wilcoxon Sensing Technologies
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 482.47
10 +
£ 466.68
Amphenol Wilcoxon Sensing Technologies
PC420VP-10, Amphenol Wilcoxon Sensing Technologies
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 337.73
10 +
£ 326.68
Amphenol Wilcoxon Sensing Technologies
PC420VP-10-EX, Amphenol Wilcoxon Sensing Technologies
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 486.83
10 +
£ 470.89
Amphenol Wilcoxon Sensing Technologies
PCH420V-M12, Amphenol Wilcoxon Sensing Technologies
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 772.61
10 +
£ 740.67
Amphenol Wilcoxon Sensing Technologies
PCC421VP-10-R6, Amphenol Wilcoxon Sensing Technologies
9 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 402.05
10 +
£ 388.90
Adafruit Industries LLC
4081, Adafruit Industries LLC
372 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 0.86
Showing
1 -

New Items
New items
VKV022, ifm efector, inc.

VKV022, ifm efector, inc.

VIBRATION SENSOR; NORMALLY CLOSE
New items
3040AN40, Honeywell

3040AN40, Honeywell

Honeywell VRS Sensors Honeywell offers VRS sensors for high output, general purpose, power output, high resolution, high temperature, and hazardous location applications. High Output VRS sensors are designed for use in applications where higher output voltages are needed. For best performance use in applications of low to medium speeds with medium to high impedance loads. General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. The fixed magnetic field is established by use of a permanent magnet. As a ferrous metal object approaches and passes near the sensing area the flux lines of the magnetic field change in strength. This change in magnetic field strength induces a current into a coil winding, which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage. One complete waveform occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. Self-powered operation Direct conversion of actuator speed to output frequency Simple installation No moving parts Designed for use over a wide range of speeds Adaptable to a wide variety of configurations Customized VRS products for unique speed sensing applications Potential Applications: Engine RPM measurement Motor RPM measurement Process speed measu...
New items
3040AN30, Honeywell

3040AN30, Honeywell

Honeywell VRS Sensors Honeywell offers VRS sensors for high output, general purpose, power output, high resolution, high temperature, and hazardous location applications. High Output VRS sensors are designed for use in applications where higher output voltages are needed. For best performance use in applications of low to medium speeds with medium to high impedance loads. General Purpose VRS sensors are designed for use in applications with medium to high speeds or in electrically noisy environments with relatively small air gaps. Passive Front-End Sealed versions are available for use where the sensor is exposed to fluids, lubricants or adverse environmental conditions. VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. The fixed magnetic field is established by use of a permanent magnet. As a ferrous metal object approaches and passes near the sensing area the flux lines of the magnetic field change in strength. This change in magnetic field strength induces a current into a coil winding, which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage. One complete waveform occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. Self-powered operation Direct conversion of actuator speed to output frequency Simple installation No moving parts Designed for use over a wide range of speeds Adaptable to a wide variety of configurations Customized VRS products for unique speed sensing applications Potential Applications: Engine RPM measurement Motor RPM measurement Process speed measurement Speed measurement of pumps, blowers, mixers, exhaust and ventilating fans Flow measurement on turbine me...
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Vibration Sensors and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Vibration Sensors or any other product.
This depends on the Vibration Sensors individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Vibration Sensors and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Vibration Sensors.
Yes. We keep updating our stock frequently and if a product like Vibration Sensors is not in stock then we will let you know.