What are the shipping charges for products like Flow Sensors?

Yes. We keep updating our stock frequently and if a product like Flow Sensors is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Flow Sensors is not in stock then we will let you know.

Where are your products like Flow Sensors manufactured?

Yes. We keep updating our stock frequently and if a product like Flow Sensors is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Flow Sensors?

Yes. We keep updating our stock frequently and if a product like Flow Sensors is not in stock then we will let you know.

How long will it take to receive the order that I placed for Flow Sensors?

Yes. We keep updating our stock frequently and if a product like Flow Sensors is not in stock then we will let you know.

Are your products Flow Sensors in stock?

Yes. We keep updating our stock frequently and if a product like Flow Sensors is not in stock then we will let you know.

Flow Sensors | Flow Meter Sensors | Meter Sensors

New items

FSU12LF, Sensata/Cynergy 3

The Cynergy3 FSU series flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to 85ºC. The design is based around a moving magnet and a fixed reed switch with a low flow restriction. The switches are designed to be used in liquids only and should not be used in systems with significant amounts of solid particles. 1/2 and 3/4 NPT thread connections 1/2 and 3/4 push fit connections Low flow versions available Maximum operating pressure 10 bar NSF 61 Approved Operating temperature rated to 185°F

Product Detail

New items

RS_613-4216, RS PRO

RS PRO Flow Switch The RS PRO paddle flow switch has a flow rate of 4L/min to 5.5L/min. This instrument operates by a spring-supported paddle with the magnetic triggering of a micro switch. It monitors liquid flow using a paddle. It has a spring-supported stainless steel paddle located in the flow chamber moved by a medium in the direction of flow. When a preset flow rate is approached, the magnet connected to the paddle attracts the magnet with opposite poles outside the flow chamber linked to a microswitch. This generates a limit value when the actual flow rate is above or below a nominal value preset. Note: Mainly used on water. However, if used with oil, the readings may differ due to the viscosity of the liquid. Features and Benefits Pipe diameter range is 10mm Connection type is 3/8 BSP female Good repeatability Low pressure loss Dirt-resistant Hermetic separation of electrical and hydraulic components High switch capability Tolerance ±15% of full scale Average pressure loss 0.01bar at Qmax Applications It is use for indication that something is not working and can be found in cooling circuits HVAC Laser circuits Thermal exchange (water chillers)

Product Detail

New items

LFS-03, Sensata/Cynergy 3

Sensata Cynergy3 Paddle Flow Switch, 230V, 20 Bar - LFS Series - LFS-03 Features & Benefits What pressure range can this switch handle? Where on the pipe should I install this paddle switch?

Product Detail

New items

FR4L72BVBN, Key Instruments

FR4500 Series Flow meters The FR4500 series is a standard precision-machined acrylic flow meter for liquids or gases and has direct reading air and water scales. The FR4500 flow meters can be configured with a control valve on the inlet or no valve at all, O-Rings are provided as Buna-N. Features and Benefits Easy-to-read scales Water ranges from 1 LPM to 20 LPM Air ranges from 14 LPM to 560 LPM Threaded brass inserts for quick installation Easy disassembly and assembly for maintenance Durable 1 piece clear acrylic construction Stable, easy-to-read float Superior quality Product Application Information Compatible with most gases and fluids. Note Mounting screws are required (available separately).

Product Detail

New items

DTT31-A1C111AE2CAB, Endress+Hauser

The Endress+Hauser flow switch is designed for the safe measurement, display and monitoring of relative mass flow rates of liquid media with practically no pressure loss. It can be selected between one or two switch outputs as well as one switch output and one standardized analogue output for flow rates or temperature values. Leak monitoring in process lines Monitoring pump functionality Monitoring lubrication systems Filter monitoring in the beverage industry

Product Detail

New items

FSU12A, Sensata/Cynergy 3

The Cynergy3 FSU series flow switches are designed for use in liquid flow systems at pressures up to 10 bar and temperatures up to 85ºC. The design is based around a moving magnet and a fixed reed switch with a low flow restriction. The switches are designed to be used in liquids only and should not be used in systems with significant amounts of solid particles. 1/2 and 3/4 NPT thread connections 1/2 and 3/4 push fit connections Low flow versions available Maximum operating pressure 10 bar NSF 61 Approved Operating temperature rated to 185°F

Product Detail

New items

511-3915, RS Pro

Polysulfone Flowmeters Polysulphone bodied flowmeters Open collector (NPN) pulse output proportional to flow rate Non-metallic fittings, PVDF, available for pure water or aggressive chemicals Robust sapphire bearings BSP threads on the 30 l/min model also accepts 15mm Compression fittings (brass only) Traceable calibration certificate Hall effect detection suitable for used with opaque liquids Model 1//2 3//4 Flow 2.5 to 30 l/min 6.0 to 100 l/min Working pressure 15 Bar max. 15 Bar max. Temperature range -25 to +125°C -25 to +125°C Note RS Stock 5113937 is the fixing Kit for the Flow Controller which is RS Stock 5113909 Supplied with 8888

Product Detail

New items

198840143, Georg Fischer

Paddlewheel Flow Sensor Georg Fischer Signet 2536 rotor-x paddle wheel flow sensors can measure fluid flow in pipelines and low-pressure systems from 0.5 m/s to 6 m/s. The rotor-x paddle wheel can be installed into a wide range of pipe sizes from DN15 to DN 900 by using Signet plastic fittings. Its simple, low maintenance construction is chemically compatible with a broad range of liquids (see the datasheet). Features & Benefits Easy to replace rotor Installs into pipe sizes DN15 to DN900 ( to 36 in.) Operating range 0.1 to 6 m/s (0.3 to 20 ft/s) Wide Turndown Ratio of 66:1 High resolution and noise immunity Open-collector output Chemically resistant materials Applications Rotor-x paddle wheel sensors are suitable for a wide range of aplictaions including Chemical Production Liquid Delivery Systems Pump Protection Filtration systems Pure Water Production Not suitable for gases Scrubber Systems Water Monitoring Standards CE, China RoHS, RoHS, FCC, NSF (3-2536-PX version only)

Product Detail

New items

MC804-20001403, Digitron

The Digitron ultrasonic clamp-on thermal, heat/energy meter that uses ultrasound to measure flow rate and PT100 temperature sensors to measure flow and return temperatures. The U1000MKII-HM displays energy rate and totalised energy with pulse output and communication options, so it can be used as a standalone meter or as an integral part of an aM&T or BEMs system. IP54 electronics enclosure Pulse for volume flow and energy in kWh Heat/energy metering in energy management or building services applications for LTHW or chilled water circuits

Product Detail

New items

EF.7731112291, Parker UCC

Flow Switch Calibrated flow indicator with switched output specifically designed for use with water. Suitable for installation in any plane. Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked on the viewing window. The switch incorporates an AC magnetically operated reed switch output (minimum current of 50mA) which can be adjusted across the flow range to enable remote indication of max/min, and flow rate exceeded Technical Specification Operating temperature range +5°C to +60°C Maximum working pressure 10 bar Viscosity 10 to 200 centistrokes Accuracy ±5% Repeatablilty ±1% Connections 1" BSP female thread Construction Materials Body Polyester Viewing glass Borosilicate Seals Nitrile Rubber Cone Acetal Spring Stainless Steel Note The switch is non-latching, once the flow rate has passed the switching level, it will de-activate. If latching is required, a separate circuit containing a latching relay is necessary. All units are supplied with instruction leaflets. Supplied with 2 x DIN standard sockets complete with plugs

Product Detail

New items

MR3A17BVBN, Key Instruments

Low Cost Polycarbonate Flow Meters MR3000 molded flow meters supplied with scales in LPM and SCFH for air, or CCM and GPH for water. Manufactured from high-impact polycarbonate, the MR3000 series can operate at pressures of 100 psig and temperatures of 150°F (65°C). These economically designed units provide high quality and accuracy when properly installed. The durability of the polycarbonate allows the flow meter to provide years of trouble-free service. Features and Benefits High impact polycarbonate High quality construction Flow ranges: Air 50 CCM to 100 LPM, Water 4 CCM to 40 GPH 10:1 turn direct reading scales Product Application Information For use with air and water. Ideally suited for OEM applications. Supplied with mounting brackets & built-in bezel

Product Detail

New items

155480, Gems Sensors

RFI Type Visual Flow Indicator RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming flow, and bayonet mounting lens is easily removed for quick cleanout. RFI Type RotorFlow® sensors are easy to see, easy to install and easy to afford. Features and Benefits Bright visual flow confirmation Flow ranges from 0.38 LPM to 227 LPM Removable lens for quick cleanout Available in brass, stainless steel or high performance plastic housings Product Application Information Visual flow confirmation on heat exchangers Plastic injection moulding equipment Dimensions Visual only - Polypropylene H64mm W35mm L123mm (Brass L77mm) Electronic versions - Polypropylene H64mm W61mm L125mm (Brass L77mm)

Product Detail