Featured Products
The Sensirion SFC5500 series mass flow controller works on unsurpassed CMOSens technology. It can achieves unmatched ratings for speed, accuracy...
SDP8xx Analog Differential Pressure Sensors The Sensirion SDP800 series of Analog differential pressure sen...
SDP8xx Digital Differential Pressure Sensors The Sensirion SDP800 series of Digital differential pressure sensors o...
In many drone applications the airspeed is important information for reliable and controlled take off, landing and flight. The airspeed is most e...
The Sensirion SHT3x-ARP is the next generation of temperature and humidity sensors with enhanced signal processing by which temperature and humid...
SDP1000/SDP2000 Low Range Differential Pressure Sensors Sensirions SDP1000/SDP2000 series of low range dif...
The Sensirion solution on providing high volumes of flow meters for medical ventilators in order to support the global pandemic situation due to...
SHT3x Series Temperature & Humidity Sensors The SHT3x series are part of Sensirions next generation of temperature and humidity sensors. The 8-p...
The SHTC3 digital humidity sensor builds on the success of the proven SHTC1 sensor. Thanks to a broader supply voltage range (1.62 – 3.6 V) and h...
The SHT3x humidity sensor series consists of a low-cost version with the SHT30 humidity sensor, a standard version with the SHT31 humidity sensor...
With the SCC30, customers can place a humidity and temperature sensor anywhere in a device and connect it to the main board with a cable without...
SHT2x Digital Humidity & Temperature Sensors The Sensirion SHT2x series of DFN digital humidity & temperature senso...
Popular Categories For Sensirion
Popular Items
Popular items
SFC5500-10slm, Sensirion
The Sensirion SFC5500 series mass flow controller works on unsurpassed CMOSens technology. It can achieves unmatched ratings for speed, accuracy and repeatability at very attractive system cost.
Excellent accuracy
Excellent repeatability
No drift and no re-calibration
Popular items
SDP816-125PA, Sensirion
SDP8xx Analog Differential Pressure Sensors
The Sensirion SDP800 series of Analog differential pressure sensors offer superb performance and are targeted at high-volume applications. These sensors are for use with air or other non-aggressive gases and deliver accurate and stable results covering a range of up to +/-500 Pa(+/-2 inch H20 / +/-5 mbar) even at very low differential pressures. Configurable to linear or square root by a separate pin, the SDP800 series features an analog ratiometric voltage output.
Suitable for high-quality mass production, the CMOS technology is the ideal choice for demanding and cost-sensitive OEM applications. High process capability and great signal to noise ratio make the CMOSens Technology highly reliable and give it great long-term stability.
Pressure Sensors, Sensirion
Popular items
SDP800-125Pa, Sensirion
SDP8xx Digital Differential Pressure Sensors
The Sensirion SDP800 series of Digital differential pressure sensors offer superb performance and are targeted at high-volume applications. These sensors are for use with air or other non-aggressive gases and deliver accurate and stable results covering a range of up to +/-500 Pa(+/-2 inch H20 / +/-5 mbar) even at very low differential pressures.
Featuring a 2-wire interface, the SDP800 series from Sensirion are made to easily connect to a microprocessor. Suitable for high-quality mass production, the CMOS technology is the ideal choice for demanding and cost-sensitive OEM applications. High process capability and great signal to noise ratio make the CMOSens Technology highly reliable and give it great long-term stability.
Pressure Sensors, Sensirion
Popular items
SDP33-1500Pa-TR-250pcs, Sensirion
In many drone applications the airspeed is important information for reliable and controlled take off, landing and flight. The airspeed is most effectively measured with a pilot tube and a differential pressure sensor. Recently, PX4 integrated the SDP3x differential pressure sensor into an airspeed sensor development kit for VTOL and fixed wing UAV applications, which is fully integrated with the open source autopilot. The integration includes a full aerodynamic software compensation model for the sensor and pitot tube making it a plug and play solution.
Extended range to 1500Pa
Calibrated and temperature compensated
Excellent repeatability, no drift, no offset
Reflow solderable – Pick & Place
Extended feature set – smart averaging
Popular items
SHT30-ARP-B2.5kS, Sensirion
The Sensirion SHT3x-ARP is the next generation of temperature and humidity sensors with enhanced signal processing by which temperature and humidity can be read out at different pins.
High reliability and long-term stability
High signal-to-noise ratio
High process capability
Increased intelligence
Popular items
SDP2000-L, Sensirion
SDP1000/SDP2000 Low Range Differential Pressure Sensors
Sensirions SDP1000/SDP2000 series of low range differential pressure sensors for air and other non-aggressive gases provide fast and reliable measurement with excellent stability. The small and cost-effective design makes them an ideal match for price-sensitive solutions, e.g. in medical and HVAC applications. Each differential pressure sensor is individually calibrated and temperature compensated.
Low Differential Pressure Sensors with fast response time
The SDP1108 and SDP2208 devices (
123-7134
and
123-7135
) feature a reduced response time of 8ms optimised for medical ventilation applications.
5V dc supply operation
0.25 to 4.0V analogue output
Zero offset and excellent long term stability
Insensitive to the mounting orientation
Pressure Sensors, Sensirion
Popular items
SFM3019, Sensirion
The Sensirion solution on providing high volumes of flow meters for medical ventilators in order to support the global pandemic situation due to the Corona virus outbreak. It relies on a modular approach of assembling approved parts with good availability to Sensirion and a high-volume through-put manufacturing.
High reliability and long-term stability
Industry-proven technology with a track record of more than 15 years
Designed for mass production
Popular items
SHT31-ARP-B2.5kS, Sensirion
SHT3x Series Temperature & Humidity Sensors
The SHT3x series are part of Sensirions next generation of temperature and humidity sensors. The 8-pin DFN packages are constructed with CMOSens® Technology which allows the sensing elements to be combined with the analogue and digital signal processing circuitry. The SHT3x series have increased intelligence, reliability and improved accuracy specifications compared to their predecessors and the small package makes for easy integration in a range of applications.
876-5067
· SHT31-ARP-B Analogue output
876-5061
· SHT31-DIS-B Digital output
123-7352
· SHT35-DIS-B Digital output, high accuracy
CMOSens® Technology
Fully calibrated, linearised, and temperature compensated digital output
Wide supply voltage range, from 2.4 to 5.5 V
10 to 90% ratiometric analogue Voltage output
Parallel measurement of temperature and humidity at separate pins
Tiny 8-Pin DFN package
Popular items
SHTC3, Sensirion
The SHTC3 digital humidity sensor builds on the success of the proven SHTC1 sensor. Thanks to a broader supply voltage range (1.62 – 3.6 V) and higher accuracy (±2% RH, ±0.2°C) than its predecessor, it enables greater flexibility.
Sensirion’s CMOSens® Technology offers a complete sensor system on a single chip, consisting of a capacitive humidity sensor, a bandgap temperature sensor, analog and digital signal processing, A/D converter, calibration data memory, and a digital communication interface supporting I2C fast mode. With constant accuracy over a large measurement range, the SHTC3 offers the best performance-price ratio. Tape and reel packaging combined with suitability for standard SMD assembly processes make the SHTC3 ideal for high-volume applications.
Popular items
SEK-SHT35-Sensors, Sensirion
The SHT3x humidity sensor series consists of a low-cost version with the SHT30 humidity sensor, a standard version with the SHT31 humidity sensor, and a high-end version with the SHT35 humidity sensor. The SHT3x humidity sensor series combines multiple functions and various interfaces with a applications-friendly, very wide operating voltage range.
The SHT3x builds on a completely new and optimized CMOSens® chip, which allows for increased reliability and improved accuracy specifications. The SHT3x offers a range of new features, such as enhanced signal processing, two distinctive and user-selectable I2C addresses, an alert mode with programmable humidity and temperature limits, and communication speeds of up to 1 MHz.
The DFN package has a footprint of 2.5 × 2.5 mm2 with a height of 0.9 mm. This allows for integration of the SHT3x into a great variety of applications. Additionally, the wide supply voltage range of 2.15 to 5.5 V and variety of available interfaces guarantee compatibility with diverse integration requirements.
Popular items
SCC30-DB RH/T module, 125 PCS, Sensirion
With the SCC30, customers can place a humidity and temperature sensor anywhere in a device and connect it to the main board with a cable without having to spend design resources for creating an own sensor module. Based on Sensirion’s experience and expertise in environmental sensing the SCC30 is optimized for easy design-in and sensing performance. The SCC30 offers superior sensor performance of capacitive type sensor elements and a very attractive price/performance ratio due to Sensirion’s latest generation of highly integrated humidity and temperature sensors SHT3x.
The module provides high reliability and excellent long-term stability, a broad supply voltage range of 2.4 to 5.5V and delivers fully calibrated and processed measurement values through an I2C interface. The compact design with connector and easy-to-use digital interface make the SCC30 a cost-effective and versatile plug & play solution for a wide range of applications.
Popular items
SHT20, Sensirion
SHT2x Digital Humidity & Temperature Sensors
The Sensirion SHT2x series of DFN digital humidity & temperature sensors are CMOSens® based. They are an industry standard, widely used humidity and temperature sensor. Humidity is measured using a capacitive sensor while temperature is measured using a band-gap sensor.
The SHT2x sensors also contain a version 4 silicon chip with an amplifier, A/D converter, OTP memory and a digital interface. They come in a plastic package which leaves the sensor area open, protecting the devices from external impact and providing long-term stability.
SHT2x sensors are ideal for both high and low volume applications.
The SHT21P has a PWM output and the SHT21S has a PDM output; these can be converted into analogue outputs by the use of suitable low-pass filters.
SHT20
- Low cost,
SHT21
- Standard,
SHT25
- High Accuracy
CMOSens® based technology
Fully calibrated
I²C serial interface (Not SHT21P/SHT21S)
Digital output
Low power consumption
Long-term stability
Supply voltage range: 2.1 to 3.6 V
The following sensors are available:
123-7351
· SHT20 · I²C Digital output
786-5554
· SHT21 · I²C Digital output
876-5055
· SHT21P · PWM output
876-5064
· SHT21S · PDM output
727-6226
· SHT25 · I²C Digital output
Temperature & Humidity Sensors, Sensirion
New Items
New items
SFC5500-10slm, Sensirion
The Sensirion SFC5500 series mass flow controller works on unsurpassed CMOSens technology. It can achieves unmatched ratings for speed, accuracy and repeatability at very attractive system cost.
Excellent accuracy
Excellent repeatability
No drift and no re-calibration
New items
SDP816-125PA, Sensirion
SDP8xx Analog Differential Pressure Sensors
The Sensirion SDP800 series of Analog differential pressure sensors offer superb performance and are targeted at high-volume applications. These sensors are for use with air or other non-aggressive gases and deliver accurate and stable results covering a range of up to +/-500 Pa(+/-2 inch H20 / +/-5 mbar) even at very low differential pressures. Configurable to linear or square root by a separate pin, the SDP800 series features an analog ratiometric voltage output.
Suitable for high-quality mass production, the CMOS technology is the ideal choice for demanding and cost-sensitive OEM applications. High process capability and great signal to noise ratio make the CMOSens Technology highly reliable and give it great long-term stability.
Pressure Sensors, Sensirion
New items
SDP800-125Pa, Sensirion
SDP8xx Digital Differential Pressure Sensors
The Sensirion SDP800 series of Digital differential pressure sensors offer superb performance and are targeted at high-volume applications. These sensors are for use with air or other non-aggressive gases and deliver accurate and stable results covering a range of up to +/-500 Pa(+/-2 inch H20 / +/-5 mbar) even at very low differential pressures.
Featuring a 2-wire interface, the SDP800 series from Sensirion are made to easily connect to a microprocessor. Suitable for high-quality mass production, the CMOS technology is the ideal choice for demanding and cost-sensitive OEM applications. High process capability and great signal to noise ratio make the CMOSens Technology highly reliable and give it great long-term stability.
Pressure Sensors, Sensirion
New items
SDP33-1500Pa-TR-250pcs, Sensirion
In many drone applications the airspeed is important information for reliable and controlled take off, landing and flight. The airspeed is most effectively measured with a pilot tube and a differential pressure sensor. Recently, PX4 integrated the SDP3x differential pressure sensor into an airspeed sensor development kit for VTOL and fixed wing UAV applications, which is fully integrated with the open source autopilot. The integration includes a full aerodynamic software compensation model for the sensor and pitot tube making it a plug and play solution.
Extended range to 1500Pa
Calibrated and temperature compensated
Excellent repeatability, no drift, no offset
Reflow solderable – Pick & Place
Extended feature set – smart averaging
New items
SHT30-ARP-B2.5kS, Sensirion
The Sensirion SHT3x-ARP is the next generation of temperature and humidity sensors with enhanced signal processing by which temperature and humidity can be read out at different pins.
High reliability and long-term stability
High signal-to-noise ratio
High process capability
Increased intelligence
New items
SDP2000-L, Sensirion
SDP1000/SDP2000 Low Range Differential Pressure Sensors
Sensirions SDP1000/SDP2000 series of low range differential pressure sensors for air and other non-aggressive gases provide fast and reliable measurement with excellent stability. The small and cost-effective design makes them an ideal match for price-sensitive solutions, e.g. in medical and HVAC applications. Each differential pressure sensor is individually calibrated and temperature compensated.
Low Differential Pressure Sensors with fast response time
The SDP1108 and SDP2208 devices (
123-7134
and
123-7135
) feature a reduced response time of 8ms optimised for medical ventilation applications.
5V dc supply operation
0.25 to 4.0V analogue output
Zero offset and excellent long term stability
Insensitive to the mounting orientation
Pressure Sensors, Sensirion
New items
SFM3019, Sensirion
The Sensirion solution on providing high volumes of flow meters for medical ventilators in order to support the global pandemic situation due to the Corona virus outbreak. It relies on a modular approach of assembling approved parts with good availability to Sensirion and a high-volume through-put manufacturing.
High reliability and long-term stability
Industry-proven technology with a track record of more than 15 years
Designed for mass production
New items
SHT31-ARP-B2.5kS, Sensirion
SHT3x Series Temperature & Humidity Sensors
The SHT3x series are part of Sensirions next generation of temperature and humidity sensors. The 8-pin DFN packages are constructed with CMOSens® Technology which allows the sensing elements to be combined with the analogue and digital signal processing circuitry. The SHT3x series have increased intelligence, reliability and improved accuracy specifications compared to their predecessors and the small package makes for easy integration in a range of applications.
876-5067
· SHT31-ARP-B Analogue output
876-5061
· SHT31-DIS-B Digital output
123-7352
· SHT35-DIS-B Digital output, high accuracy
CMOSens® Technology
Fully calibrated, linearised, and temperature compensated digital output
Wide supply voltage range, from 2.4 to 5.5 V
10 to 90% ratiometric analogue Voltage output
Parallel measurement of temperature and humidity at separate pins
Tiny 8-Pin DFN package
New items
SHTC3, Sensirion
The SHTC3 digital humidity sensor builds on the success of the proven SHTC1 sensor. Thanks to a broader supply voltage range (1.62 – 3.6 V) and higher accuracy (±2% RH, ±0.2°C) than its predecessor, it enables greater flexibility.
Sensirion’s CMOSens® Technology offers a complete sensor system on a single chip, consisting of a capacitive humidity sensor, a bandgap temperature sensor, analog and digital signal processing, A/D converter, calibration data memory, and a digital communication interface supporting I2C fast mode. With constant accuracy over a large measurement range, the SHTC3 offers the best performance-price ratio. Tape and reel packaging combined with suitability for standard SMD assembly processes make the SHTC3 ideal for high-volume applications.
New items
SEK-SHT35-Sensors, Sensirion
The SHT3x humidity sensor series consists of a low-cost version with the SHT30 humidity sensor, a standard version with the SHT31 humidity sensor, and a high-end version with the SHT35 humidity sensor. The SHT3x humidity sensor series combines multiple functions and various interfaces with a applications-friendly, very wide operating voltage range.
The SHT3x builds on a completely new and optimized CMOSens® chip, which allows for increased reliability and improved accuracy specifications. The SHT3x offers a range of new features, such as enhanced signal processing, two distinctive and user-selectable I2C addresses, an alert mode with programmable humidity and temperature limits, and communication speeds of up to 1 MHz.
The DFN package has a footprint of 2.5 × 2.5 mm2 with a height of 0.9 mm. This allows for integration of the SHT3x into a great variety of applications. Additionally, the wide supply voltage range of 2.15 to 5.5 V and variety of available interfaces guarantee compatibility with diverse integration requirements.
New items
SCC30-DB RH/T module, 125 PCS, Sensirion
With the SCC30, customers can place a humidity and temperature sensor anywhere in a device and connect it to the main board with a cable without having to spend design resources for creating an own sensor module. Based on Sensirion’s experience and expertise in environmental sensing the SCC30 is optimized for easy design-in and sensing performance. The SCC30 offers superior sensor performance of capacitive type sensor elements and a very attractive price/performance ratio due to Sensirion’s latest generation of highly integrated humidity and temperature sensors SHT3x.
The module provides high reliability and excellent long-term stability, a broad supply voltage range of 2.4 to 5.5V and delivers fully calibrated and processed measurement values through an I2C interface. The compact design with connector and easy-to-use digital interface make the SCC30 a cost-effective and versatile plug & play solution for a wide range of applications.
New items
SHT20, Sensirion
SHT2x Digital Humidity & Temperature Sensors
The Sensirion SHT2x series of DFN digital humidity & temperature sensors are CMOSens® based. They are an industry standard, widely used humidity and temperature sensor. Humidity is measured using a capacitive sensor while temperature is measured using a band-gap sensor.
The SHT2x sensors also contain a version 4 silicon chip with an amplifier, A/D converter, OTP memory and a digital interface. They come in a plastic package which leaves the sensor area open, protecting the devices from external impact and providing long-term stability.
SHT2x sensors are ideal for both high and low volume applications.
The SHT21P has a PWM output and the SHT21S has a PDM output; these can be converted into analogue outputs by the use of suitable low-pass filters.
SHT20
- Low cost,
SHT21
- Standard,
SHT25
- High Accuracy
CMOSens® based technology
Fully calibrated
I²C serial interface (Not SHT21P/SHT21S)
Digital output
Low power consumption
Long-term stability
Supply voltage range: 2.1 to 3.6 V
The following sensors are available:
123-7351
· SHT20 · I²C Digital output
786-5554
· SHT21 · I²C Digital output
876-5055
· SHT21P · PWM output
876-5064
· SHT21S · PDM output
727-6226
· SHT25 · I²C Digital output
Temperature & Humidity Sensors, Sensirion
Don’t hesitate to ask questions for better clarification.