Rates
1+
£ 101.56
Products Found: 472
Showing Results For: PLC I/O Modules
PLC I/O Modules
FILTERS
Filters
Showing
1 -
New Items
New items
New items
New items
6GK5786-1BA60-2AA0, Siemens
W-786-1PRO — Access Point
SCALANCE access points with one built-in radio interface
For designing Industrial Wireless LAN (IWLAN) radio networks
Reliable communication
Encryption protects against unauthorized access
Suitable for mounting outdoors
Permanently installed wireless card
1
Transfer rate:
54 Mbit/s max.
Frequency range:
2.4 GHz / 5 GHz
Radio interface:
1; 8 x SSIDs with 8 VLANs each
Electrical/optical interface:
1 x RJ45 socket (10/100 Mbit/s, TP) or 1 x BFOC multimode
External antenna connections:
2 x R-SMA
Slot for removable medium:
C-PLUG / PRESET-PLUG
Protection rating:
IP65
Operating temperature:
-40 °C → +70 °C
Dimensions (W x H x D):
251x251x80 mm
Mounting:
Wall mount
New items
SNAP-AITM, Opto 22
SNAP Analog Input Modules
Professional range of Opto 22 SNAP Analog Input Modules featuring an on board microprocessor to provide module level intelligence. The modules are designed to mount onto a SNAP PAC rack.
2, 4, 8, 12 or 32 single ended inputs per module
Out of range indication
OPTO 22 AC, DC Input & Output Modules
New items
New items
New items
SNAP-AIV-72, Opto 22
SNAP Analog Input Modules
Professional range of Opto 22 SNAP Analog Input Modules featuring an on board microprocessor to provide module level intelligence. The modules are designed to mount onto a SNAP PAC rack.
2, 4, 8, 12 or 32 single ended inputs per module
Out of range indication
OPTO 22 AC, DC Input & Output Modules
New items
New items
SNAP-SCM-ST2, Opto 22
SNAP Pulse Output Module
Professional range of Opto 22 SNAP pulse output modules. The modules are two channel serial communication module which provide pulse and direction signals for stepper motor drives. The channels are isolated from the logic side.
Dual Ouputs
OPTO 22 AC, DC Input & Output Modules
New items
240D3, Opto 22
Solid State Relays
A professional range of AC switching solid state relays from Opto 22. Every Opto 22 solid state relay is subjected to full load test and six times the rated current surge both before and after encapsulation.
Rugged, epoxy encapsulation construction
4,000 volts of optical isolation
Subjected to full load test and six times the rated
current surge before and after encapsulation
Unique heat-spreader technology
AC or DC control versions available
New items
CSPID1RA, Red Lion
Series CSPID - PID Control Modules
The Model CSPID series modules are full featured PID controllers designed for use with the Modular Controller Series.
The CSPID1 is a single loop controller, while the CSPID2 is a dual loop controller. The design of the system provides a true modular PID control platform for multi-zone control applications.
The modules accept a wide range of thermocouple, RTD, 0-10 V, 0/4-20 mA signals.
PID modules for the modular controller series
Combinable with master modules e. g. stock no.
905-5456
Hot swappable replacement
Auto addressing
PID control with reduced overshoot
Universal analog input
On demand auto-tuning for PID settings
For use in hazardous location
DIN Rail mounting
Programming cable available, stock no.
905-5258
Versions:
Single loop, Output Relay/Analog – Stock no.
905-5450
Dual loop, Output Relay - Stock no.
905-5469
Red Lion Modular I/O Systems
New items
90599001, Steute
Radio Receiver Module, 1 Channel
Industrial wireless receiver and accessories based on EnOcean protocoll with 868,3 MHz transmission frequency.
Thermoplastic enclosure
EnOcean standard
1-channel: potential-free relay outputs
1 change-over contact, max. 16 A, NPN or PNP output
Transmitter/receiver assignment by teaching mode
LEDs for indication of switching state
868.3 MHz frequency band
35 mm enclosure
SMA plug-in connector for external antenna
Standards
IEC 60068-2-6; IEC 60068-2-27