Image is for illustrative purposes only.
Please refer to product description.

manufacturer logo

Manufacturer : Block
Manufacturer Part No : FL 6/14014/9
Enrgtech Part No : ET10001973
Product Range : PolySwitch RXEF Series

9V ac, ±14V ac 2 Output Through Hole PCB Transformer, 6VA

PCB Mount Transformer, Triple Output, 115/230Vac High quality, low profile, triple output encapsulated safety isolating transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230Va.c. or parallel for 115Va.c. operation. These transformers are designed for use in 5V and ±12Vd.c. power supplies when used in conjunction with readily available bridge rectifiers and regulators. Designed for through hole soldering direct to PCB's; mechanical fixing can be supplemented by 4 self-tapping screws (No.4 x 9.5 mm max. on the 6VA to 30VA transformers and M3 on the 45VA transformers) using holes moulded into the corners of the case. Low profile compact design Double section glass fibre reinforced polyamide bobbins 5kV primary/secondary isolation 100% electrical and flash tested High efficiency and low temperature rise Low inter-winding capacitance Low radiated noise Extra fixing holes for secure board mounting High quality manufacture and testing in accordance to VDE 0570, EN 61558 Selection Guide VA Rating Fixing centres (mm) Pin configuration (mm) C1 C2 P1 P2 S1 S2 A 6 37.5 47.5 15 10 20 5 35 10 50 62.5 15 15 30 5 45 14 50 62.5 15 15 30 5 45 18 50 62.5 15 15 30 5 45 30 50 62.5 15 15 30 5 45 45 60 75 27 15 32 10 53.5 Full load output voltage Secondary 1: 9Vac Secondary 2: 14.5-0-14.5Vac Typical regulator types Secondary 1: 7805 Secondary 2: 317L 337LZ Isolation Primary to Secondary 5kV Primary to Primary 1kV Secondary to Secondary 250V Protection Class 2 Insulation Class E (120°C) Operating temperature +40°C ambient max. Pin diameter (mm) 0.8 mm Design notes VA Rating (VA) Smothing Capacitor (C) Secondary Voltage off load (V) Secondary 1 (uF) Secondary 2 (uF) 6 470 2 x 220 On load V x 1.33 10 1000 2 x 220 On load V x 1.32 14 1000 2 x 220 ...
PCB Mount Transformer, Triple Output, 115/230Vac High quality, low profile, triple output encapsulated safety isolating transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230Va.c. or parallel for 115Va.c. operation. These transformers are designed for use in 5V and ±12Vd.c. power supplies when used in conjunction with readily available bridge rectifiers and regulators. Designed for through hole soldering direct to PCB's; mechanical fixing can be supplemented by 4 self-tapping screws (No.4 x 9.5 mm max. on the 6VA to 30VA transformers and M3 on the 45VA transformers) using holes moulded into the corners of the case. Low profile compact design Double section glass fibre reinforced polyamide bobbins 5kV primary/secondary isolation 100% electrical and flash tested High efficiency and low temperature rise Low inter-winding capacitance Low radiated noise Extra fixing holes for secure board mounting High quality manufacture and testing in accordance to VDE 0570, EN 61558 Selection Guide VA Rating Fixing centres (mm) Pin configuration (mm) C1 C2 P1 P2 S1 S2 A 6 37.5 47.5 15 10 20 5 35 10 50 62.5 15 15 30 5 45 14 50 62.5 15 15 30 5 45 18 50 62.5 15 15 30 5 45 30 50 62.5 15 15 30 5 45 45 60 75 27 15 32 10 53.5 Full load output voltage Secondary 1: 9Vac Secondary 2: 14.5-0-14.5Vac Typical regulator types Secondary 1: 7805 Secondary 2: 317L 337LZ Isolation Primary to Secondary 5kV Primary to Primary 1kV Secondary to Secondary 250V Protection Class 2 Insulation Class E (120°C) Operating temperature +40°C ambient max. Pin diameter (mm) 0.8 mm Design notes VA Rating (VA) Smothing Capacitor (C) Secondary Voltage off load (V) Secondary 1 (uF) Secondary 2 (uF) 6 470 2 x 220 On load V x 1.33 10 1000 2 x 220 On load V x 1.32 14 1000 2 x 220 On load V x 1.28 18 2000 2 x 220 On load V x 1.26 30 4700 2 x 1000 On load V x 1.25 45 4700 2 x 1000 On load V x 1.24 Approvals ENEC, VDE, UL recognised Standards VDE 0570, EN 61558 Approvals VDE; UL Standards VDE 0570; EN 61558

Product Information

Number of Outputs : 2
Maximum Temperature : +40°C
Dimensions : 53 x 44 x 22.6mm
Weight : 175g
Primary Voltage Rating : 115V ac, 230V ac
Length : 53mm
Maximum Operating Frequency : 60Hz
Width : 44mm
Depth : 22.6mm
Secondary Voltage Rating : ±14V ac, 9V ac
Minimum Operating Frequency : 50Hz
Mounting Type : Through Hole
Power Rating : 6VA
rohs : RoHS Certificate of Compliance

Technical Documents


Availability:
0
in stock
Check now

Rate:
  • 1-9
    +
    £ 10.932
  • 10-24
    +
    £ 10.152
  • 25-49
    +
    £ 9.578

Qty:

Similar Products

Enrgtech Part # Manufacturer Part No Description Availability Rate Quantity

  • RS Pro Datasheet (Technical Reference)

PCB Mounting, Flame Retardant Transformer with Thermal Fuse ...

88
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 9.804


  • RS PRO Datasheet (Technical Reference)

PCB Mount 115/230Vac Transformer Twin 115Va.c. 50/ ...

27
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 7.482
  • 10
    +
    £ 6.505
  • 25
    +
    £ 6.016


  • Low Profile Transformer FL Range Data Sheet (Technical Reference)

PCB Mounting Low Profile 115 / 230Vac Primary ...

172
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 8.676
  • 10
    +
    £ 7.135
  • 50
    +
    £ 6.336


  • 44000 & 45000 SERIES ENCAPSULATED TRANSFORMERS Data Sheet (Technical Reference)

Type UI 30 - 3 VA → 10 VA Secondary volt ...

29
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 7.736
  • 25
    +
    £ 5.950
  • 50
    +
    £ 5.649


  • RS Pro Datasheet (Technical Reference)

PCB Mounting, Flame Retardant Transformer with Thermal Fuse Thermal fuse in pri ...

41
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 6.298
  • 25
    +
    £ 5.048
  • 100
    +
    £ 4.691


PCB Mount Transformer, Triple Output, 115/230Vac High quality, low profile, tri ...

0
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 13.244
  • 10
    +
    £ 12.323
  • 25
    +
    £ 11.646


  • 44000 & 45000 SERIES ENCAPSULATED TRANSFORMERS Data Sheet (Technical Reference)

Type UI 30 - 3 VA → 10 VA Secondary volt ...

7
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 5.743
  • 25
    +
    £ 5.161
  • 50
    +
    £ 4.653


  • Datasheet (Technical Reference)
  • RS Pro Datasheet (Technical Reference)

230 Vac Primary Transformers Fully shroude ...

6
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 7.304
  • 10
    +
    £ 6.439
  • 25
    +
    £ 6.054


  • RS PRO Datasheet (Technical Reference)

PCB Mount 115/230Vac Transformer Twin 115Va.c. 50/60Hz primary windings which m ...

0
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 7.238
  • 10
    +
    £ 6.279
  • 25
    +
    £ 5.828


  • FL 6/9 Low Profile Transformer Data Sheet (Technical Reference)
  • Low Profile Transformer FL Range Data Sheet (Technical Reference)

PCB Mounting Low Profile 115 / 230Vac Primary ...

113
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 8.968
  • 10
    +
    £ 7.266
  • 25
    +
    £ 6.900


  • Datasheet (Technical Reference)
  • RS Pro Datasheet (Technical Reference)

230 Vac Primary Transformers Fully shrouded bobbin ...

54
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 4.879
  • 10
    +
    £ 3.835
  • 25
    +
    £ 3.610


  • 44000 & 45000 SERIES ENCAPSULATED TRANSFORMERS Data Sheet (Technical Reference)

Type EI 54 / 18.8 → 16 VA transformers Secondary voltages are nominal load vo ...

13
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 6.702
  • 25
    +
    £ 6.072
  • 50
    +
    £ 5.772


  • RS PRO Datasheet (Technical Reference)

PCB Mount 115/230Vac Transformer Twin 115Va.c. 50/ ...

50
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 6.740
  • 25
    +
    £ 5.640
  • 100
    +
    £ 5.226


  • 44000 & 45000 SERIES ENCAPSULATED TRANSFORMERS Data Sheet (Technical Reference)

Type UI 30 - 3 VA → 10 VA Secondary voltages are nominal load voltages on res ...

13
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 4.832
  • 25
    +
    £ 4.700
  • 50
    +
    £ 4.578


  • Datasheet (Technical Reference)

Type EI 30 - 1 VA → 2.3 VA series 44000 transformers ...

5
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 2.764
  • 25
    +
    £ 2.651
  • 50
    +
    £ 2.538


  • 44000 & 45000 SERIES ENCAPSULATED TRANSFORMERS Data Sheet (Technical Reference)

Type EI 42 / 14.8 → 5 VA transformers Se ...

7
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 4.926
  • 25
    +
    £ 4.691
  • 50
    +
    £ 4.465


  • RS PRO Datasheet (Technical Reference)

PCB Mount 115/230Vac Transformer Twin 115Va.c. 50/ ...

102
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 7.652
  • 10
    +
    £ 7.116
  • 25
    +
    £ 6.806


  • RS Pro Datasheet (Technical Reference)

PCB Mounting, Flame Retardant Transformer with Thermal Fuse ...

19
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 6.627
  • 25
    +
    £ 5.302
  • 100
    +
    £ 4.926


  • RS Pro Datasheet (Technical Reference)

PCB Mounting, Flame Retardant Transformer with Thermal Fuse ...

192
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 4.399
  • 25
    +
    £ 3.600
  • 100
    +
    £ 3.516


  • RS PRO Datasheet (Technical Reference)

PCB Mount 115/230Vac Transformer Twin 115Va.c. 50/ ...

87
in stock


Check Stock & Lead Times Packaging Options
  • 1
    +
    £ 7.313
  • 10
    +
    £ 6.336
  • 25
    +
    £ 5.866