Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

0.0 / 5

Reviews 0 Not Rated Yet
Myrra Profile

Website
Manufacturer Type
Company Size
Location
Founded
Specialties
Reviews
5 star
(0%)
4 star
(0%)
3 star
(0%)
2 star
(0%)
1 star
(0%)

Be the first to review this manufacturer.
Don’t hesitate to ask questions for better clarification.

Featured Products


Popular Categories For Myrra


Categories For Myrra




New Items
New items
44441, Myrra

44441, Myrra

Type EI 60 / 21.2 → 22 VA transformers Secondary voltages are nominal load voltages on resistive loads. Primary voltage: 230 V Current consumption: 125 mA Height (mm) - transformer:  47.75 - soldering pins:  4.5 Total P / S insulation: > 4000 V Pins: - primary: 1 → 7 - 2 secondaries: 8 → 9  13 → 14 Approvals UL, VDE Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
47151, Myrra

47151, Myrra

Single Regulated DC Output Electronic Transformers MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology They are an interesting alternative to the traditional supply in the most common applications of power lower than 5W ENERGY SAVING due to high efficiency and low standby power The applications for the Electronic series are, telecom supplies, electric substations etc. Industrial, domestic and consumer electronics With the same footprint as a EI30 transformer, they will replace the 50 Hz Transformer, Fuse, Bridge Rectifier, Regulator and Filtering Capacitor
New items
47202, Myrra

47202, Myrra

Single Regulated DC Output Electronic Transformers MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology They are an interesting alternative to the traditional supply in the most common applications of power lower than 5W ENERGY SAVING due to high efficiency and low standby power The applications for the Electronic series are, telecom supplies, electric substations etc. Industrial, domestic and consumer electronics With the same footprint as a EI30 transformer, they will replace the 50 Hz Transformer, Fuse, Bridge Rectifier, Regulator and Filtering Capacitor
New items
44442, Myrra

44442, Myrra

Type EI 60 / 21.2 → 22 VA transformers Secondary voltages are nominal load voltages on resistive loads. Primary voltage: 230 V Current consumption: 125 mA Height (mm) - transformer:  47.75 - soldering pins:  4.5 Total P / S insulation: > 4000 V Pins: - primary: 1 → 7 - 2 secondaries: 8 → 9  13 → 14 Approvals UL, VDE Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
45064, Myrra

45064, Myrra

Type UI 39 - 10 VA → 30 VA Secondary voltages are nominal load voltages on resistive loads. Only the pins indicated on the wiring diagram "physically" exist. Primary voltage: 230 V (2 x 115 V) ref. Stock secondary height Myrra no. U (V) I (mA) (mm) 10 VA – type UI 39 x 8 45037 173-9119 2 x 6 833 22 45038 173-9131 2 x 9 555 22 45039 173-9147 2 x 12 416 22 45040 173-9153 2 x 15 333 22 45041 173-9169 2 x 18 277 22 45042 173-9175 2 x 24 208 22 14 VA – type UI 39 x 10.2 45043 173-9181 2 x 6 1167 24 45044 173-9197 2 x 9 778 24 45045 173-9204 2 x 12 583 24 45046 173-9210 2 x 15 467 24 45047 173-9226 2 x 18 389 24 45048 173-9232 2 x 24 292 24 18 VA – type UI 39 x 13.5 45049 173-9248 2 x 6 1500 27 45050 173-9254 2 x 9 1000 27 45051 173-9260 2 x 12 750 27 45052 173-9276 2 x 15 600 27 45053 173-9298 2 x 18 500 27 45054 173-9305 2 x 24 375 27 24 VA – type UI 39 x 17 45055 173-9311 2 x 6 2000 31 45056 173-9327 2 x 9 1330 31 45057 173-9333 2 x 12 1000 31 45058 173-9355 2 x 15 800 31 45059 173-9361 2 x 18 666 31 45060 173-9377 2 x 24 500 31 30 VA – type UI 39 x 21 45061 173-9383 2 x 6 2500 35 45062 173-9399 2 x 9 1600 35 45063 173-9412 2 x 12 1250 35 45064 173-9428 2 x 15 1000 35 45065 173-9434 2 x 18 833 35 45066 173-9440 2 x 24 625 35 Approvals UL 506 Standards IEC 742, VDE 0551, SEV 1003 Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
44091, Myrra

44091, Myrra

Type EI 30 - 1 VA → 2.3 VA series 44000 transformers From Myyra, the 44000 Series of type EI transformers are professional safety transformers featuring an insulation of above 4000V. Inherently short circuit proof and comprising of non-flammable and self-extinguishing materials, the 44000 series of transformers are extrememly reliable. Features and Benefits: • Professional safety transformers with insulation above 4000V. • For installation on printed circuit boards (according to European grid). • Coupling in series or parallel. • Vacuum-filled with resin to ensure materials withstand aging. • Unit and 100% control on automated line. • Secondary voltages are nominal load voltages on resistive loads. Standards UL 94-V0; VDE 0551; IEC 742 Approvals UL, VDE Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
44058, Myrra

44058, Myrra

Type EI 30 - 1 VA → 2.3 VA series 44000 transformers From Myyra, the 44000 Series of type EI transformers are professional safety transformers featuring an insulation of above 4000V. Inherently short circuit proof and comprising of non-flammable and self-extinguishing materials, the 44000 series of transformers are extrememly reliable. Features and Benefits: • Professional safety transformers with insulation above 4000V. • For installation on printed circuit boards (according to European grid). • Coupling in series or parallel. • Vacuum-filled with resin to ensure materials withstand aging. • Unit and 100% control on automated line. • Secondary voltages are nominal load voltages on resistive loads. Approvals UL, VDE Standards UL 94-V0; VDE 0551; IEC 742 Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
45026, Myrra

45026, Myrra

Type UI 30 - 3 VA → 10 VA Secondary voltages are nominal load voltages on resistive loads. Only the pins indicated on the wiring diagram "physically" exist. Primary voltage: 230 V (2 x 115 V) ref. Stock secondary height Myrra no. U (V) I (mA) (mm) 3 VA – type UI 30 x 5.5 45013 173-8857 2 x 6 250 17 45014 173-8863 2 x 9 160 17 45015 173-8879 2 x 12 125 17 45016 173-8885 2 x 15 100 17 45017 173-8891 2 x 18 83 17 45018 173-8908 2 x 24 63 17 4 VA – type UI 30 x 7.5 45019 173-8914 2 x 6 333 19 45020 173-8920 2 x 9 222 19 45021 173-8936 2 x 12 166 19 45022 173-8942 2 x 15 133 19 45023 173-8958 2 x 18 111 19 45024 173-8964 2 x 24 83 19 6 VA – type UI 30 x 10.5 45025 173-8970 2 x 6 500 22 45026 173-8986 2 x 9 333 22 45027 173-9002 2 x 12 250 22 45028 173-9018 2 x 15 200 22 45029 173-9024 2 x 18 166 22 45030 173-9030 2 x 24 125 22 10 VA – type UI 30 x 16.5 45031 173-9046 2 x 6 833 28 45032 173-9052 2 x 9 555 28 45033 173-9074 2 x 12 416 28 45034 173-9080 2 x 15 333 28 45035 173-9096 2 x 18 277 28 45036 173-9103 2 x 24 208 28 Approvals UL 506 Standards IEC 742, VDE 0551, SEV 1003 Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
45036, Myrra

45036, Myrra

Type UI 30 - 3 VA → 10 VA Secondary voltages are nominal load voltages on resistive loads. Only the pins indicated on the wiring diagram "physically" exist. Primary voltage: 230 V (2 x 115 V) ref. Stock secondary height Myrra no. U (V) I (mA) (mm) 3 VA – type UI 30 x 5.5 45013 173-8857 2 x 6 250 17 45014 173-8863 2 x 9 160 17 45015 173-8879 2 x 12 125 17 45016 173-8885 2 x 15 100 17 45017 173-8891 2 x 18 83 17 45018 173-8908 2 x 24 63 17 4 VA – type UI 30 x 7.5 45019 173-8914 2 x 6 333 19 45020 173-8920 2 x 9 222 19 45021 173-8936 2 x 12 166 19 45022 173-8942 2 x 15 133 19 45023 173-8958 2 x 18 111 19 45024 173-8964 2 x 24 83 19 6 VA – type UI 30 x 10.5 45025 173-8970 2 x 6 500 22 45026 173-8986 2 x 9 333 22 45027 173-9002 2 x 12 250 22 45028 173-9018 2 x 15 200 22 45029 173-9024 2 x 18 166 22 45030 173-9030 2 x 24 125 22 10 VA – type UI 30 x 16.5 45031 173-9046 2 x 6 833 28 45032 173-9052 2 x 9 555 28 45033 173-9074 2 x 12 416 28 45034 173-9080 2 x 15 333 28 45035 173-9096 2 x 18 277 28 45036 173-9103 2 x 24 208 28 Approvals UL 506 Standards IEC 742, VDE 0551, SEV 1003 Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
45054, Myrra

45054, Myrra

Type UI 39 - 10 VA → 30 VA Secondary voltages are nominal load voltages on resistive loads. Only the pins indicated on the wiring diagram "physically" exist. Primary voltage: 230 V (2 x 115 V) ref. Stock secondary height Myrra no. U (V) I (mA) (mm) 10 VA – type UI 39 x 8 45037 173-9119 2 x 6 833 22 45038 173-9131 2 x 9 555 22 45039 173-9147 2 x 12 416 22 45040 173-9153 2 x 15 333 22 45041 173-9169 2 x 18 277 22 45042 173-9175 2 x 24 208 22 14 VA – type UI 39 x 10.2 45043 173-9181 2 x 6 1167 24 45044 173-9197 2 x 9 778 24 45045 173-9204 2 x 12 583 24 45046 173-9210 2 x 15 467 24 45047 173-9226 2 x 18 389 24 45048 173-9232 2 x 24 292 24 18 VA – type UI 39 x 13.5 45049 173-9248 2 x 6 1500 27 45050 173-9254 2 x 9 1000 27 45051 173-9260 2 x 12 750 27 45052 173-9276 2 x 15 600 27 45053 173-9298 2 x 18 500 27 45054 173-9305 2 x 24 375 27 24 VA – type UI 39 x 17 45055 173-9311 2 x 6 2000 31 45056 173-9327 2 x 9 1330 31 45057 173-9333 2 x 12 1000 31 45058 173-9355 2 x 15 800 31 45059 173-9361 2 x 18 666 31 45060 173-9377 2 x 24 500 31 30 VA – type UI 39 x 21 45061 173-9383 2 x 6 2500 35 45062 173-9399 2 x 9 1600 35 45063 173-9412 2 x 12 1250 35 45064 173-9428 2 x 15 1000 35 45065 173-9434 2 x 18 833 35 45066 173-9440 2 x 24 625 35 Approvals UL 506 Standards IEC 742, VDE 0551, SEV 1003 Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
45061, Myrra

45061, Myrra

Type UI 39 - 10 VA → 30 VA Secondary voltages are nominal load voltages on resistive loads. Only the pins indicated on the wiring diagram "physically" exist. Primary voltage: 230 V (2 x 115 V) ref. Stock secondary height Myrra no. U (V) I (mA) (mm) 10 VA – type UI 39 x 8 45037 173-9119 2 x 6 833 22 45038 173-9131 2 x 9 555 22 45039 173-9147 2 x 12 416 22 45040 173-9153 2 x 15 333 22 45041 173-9169 2 x 18 277 22 45042 173-9175 2 x 24 208 22 14 VA – type UI 39 x 10.2 45043 173-9181 2 x 6 1167 24 45044 173-9197 2 x 9 778 24 45045 173-9204 2 x 12 583 24 45046 173-9210 2 x 15 467 24 45047 173-9226 2 x 18 389 24 45048 173-9232 2 x 24 292 24 18 VA – type UI 39 x 13.5 45049 173-9248 2 x 6 1500 27 45050 173-9254 2 x 9 1000 27 45051 173-9260 2 x 12 750 27 45052 173-9276 2 x 15 600 27 45053 173-9298 2 x 18 500 27 45054 173-9305 2 x 24 375 27 24 VA – type UI 39 x 17 45055 173-9311 2 x 6 2000 31 45056 173-9327 2 x 9 1330 31 45057 173-9333 2 x 12 1000 31 45058 173-9355 2 x 15 800 31 45059 173-9361 2 x 18 666 31 45060 173-9377 2 x 24 500 31 30 VA – type UI 39 x 21 45061 173-9383 2 x 6 2500 35 45062 173-9399 2 x 9 1600 35 45063 173-9412 2 x 12 1250 35 45064 173-9428 2 x 15 1000 35 45065 173-9434 2 x 18 833 35 45066 173-9440 2 x 24 625 35 Approvals UL 506 Standards IEC 742, VDE 0551, SEV 1003 Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided
New items
44056, Myrra

44056, Myrra

Type EI 30 - 1 VA → 2.3 VA series 44000 transformers From Myyra, the 44000 Series of type EI transformers are professional safety transformers featuring an insulation of above 4000V. Inherently short circuit proof and comprising of non-flammable and self-extinguishing materials, the 44000 series of transformers are extrememly reliable. Features and Benefits: • Professional safety transformers with insulation above 4000V. • For installation on printed circuit boards (according to European grid). • Coupling in series or parallel. • Vacuum-filled with resin to ensure materials withstand aging. • Unit and 100% control on automated line. • Secondary voltages are nominal load voltages on resistive loads. Approvals UL, VDE Standards UL 94-V0; VDE 0551; IEC 742 Encapsulated – Toroidal Maximum Operating Temperature +60°C Primary – Secondary Test Voltage 4 kV UL Recognised for Insulation Class A +105°C Meets All Requirements of Class E +120°C Pin Length x Diameter 1 x 0.5 mm Note Fixing screws not provided