Featured Products
The Wachendorff repeaters solve your line extension problems and are ideal for galvanic isolation. They are suitable for use in motors and device...
The Wachendorff configurable gateway CANopen to Profibus DP enables communication between 2 independent, different bus technologies. It is easy t...
TI327401 - Multifunktion Timer The compact small timer TI327401 is settable in 5 different modes: Timer-ON,...
Rotary transducer WDG58B, incremental, shaft, 58 mm Recording of rpm, position, distance or speed Sturdy industrial...
WZSG - Measuring transducer for DMS Measuring transducer for DMS and load cells Normal signal outputs Digital input...
Wachendorff Universal PID-Controller UR4848xA PID-Controller in 48 mm x 48 mm format Universal input for process si...
DCMHT10SS Miniature Data Logger, Temperature/Humidity Waterproof stainless steel housing Programmable start and stop times Easy export of measur...
Rotary transducer WDG58B, incremental, shaft, 58 mm Recording of rpm, position, distance or speed Sturdy in...
Rotary transducer WDG58B, incremental, shaft, 58 mm Recording of rpm, position, distance or speed Sturdy in...
Rotary transducer WDG58B, incremental, shaft, 58 mm Recording of rpm, position, distance or speed Sturdy industrial...
The Wachendorff Universal Industrial Ethernet encoder with PROFINET or EtherCAT suitable for most hollow or solid shaft applications. Including:...
The Wachendorff IO-Link master (client) / CAN gateway. It enables you to connect some IO-Link slaves (such as sensors or actuators) to a CAN netw...
Popular Categories For Wachendorff
Popular Items
Popular items
HD67117, Wachendorff
The Wachendorff repeaters solve your line extension problems and are ideal for galvanic isolation. They are suitable for use in motors and devices with electromagnetic interference. Suitable as a repeater in the following bus protocols CAN 2.0A & 2.0B, CANopen, DeviceNet, and corresponds to the generic standard ISO 11898. Internal data processing is carried out using a 16-bit microprocessor. Programming the transmission rate on two sides is basically possible, with the maximum transmission rate being 1 Mbps at 25 meters. Several devices can be inserted in the same network. The DIN rail mounting and the plug-in screw terminals ensure quick and safe installation and problem-free wiring of the device.
Intended for professional use
Enables expansion of a line segment
Galvanic isolation of the CAN branches
Extension of the number of nodes
Different transmission rates at CAN branches
Protocol independent
Popular items
HD67551, Wachendorff
The Wachendorff configurable gateway CANopen to Profibus DP enables communication between 2 independent, different bus technologies. It is easy to configure with the associated PC software via the RS232 interface. The internal data processing is done with a 16-bit microprocessor. It is fundamentally possible to set different transmission rates, with the maximum transmission rate being 12 Mbps on the Profibus side. Installation is simple and reliable on DIN rails.
Configurable gateway for professional applications
Gateway/Bridge for CANopen on Profibus DP
Galvanic isolation
Different baud rates
Popular items
UR48483A, Wachendorff
Wachendorff Universal PID-Controller UR4848xA
PID-Controller in 48 mm x 48 mm format
Universal input for process signals, thermocouples, Pt100, Pt500, Pt1000 and RTD
Popular items
RS_795-1056, Wachendorff
Rotary transducer WDG58B, incremental, shaft, 58 mm
Recording of rpm, position, distance or speed
Sturdy industrial aluminium housing with clamping flange
High protection class according to DIN 40 050: IP65 (shaft), IP67 (cover)
Very high axial and radial loads
Early warning output
Highly precise chip analysis
Standards: DIN VDE 0160
Popular items
TI327401, Wachendorff
TI327401 - Multifunktion Timer
The compact small timer TI327401 is settable in 5 different modes: Timer-ON, Timer-OFF, Pause-Work, Oscillator, PWM (time-proportioned output), all options with independent setting of ON-OFF times. 3 digital inputs are available (NPN/PNP/Potential free contact) for external commands like Start, Stop, Reset; one input is also analogic in order to allow the modification of working times by external potentiometer.
Due to the 5 different time bases (hundredths, tenths, seconds, minutes, hours), the timer is usable for a lot of different applications. In addition to an excellent cost effectiveness and high quality, the timer offers a rugged, compact housing and a brilliant display.
Timer in 32 mm x 74 mm format
5 different operation modes
2-line LED display
Two red indicators for status relay outputs and a yellow indicator for serial communication
Easy programming by front keys or software
32 x 74 mm format
Two relay outputs
Universal AC/DC power supply
Programming kit with USB cable available (stock-no.
819-9745
)
Popular items
PM001601, Wachendorff
WZSG - Measuring transducer for DMS
Measuring transducer for DMS and load cells
Normal signal outputs
Digital input and output
RS232 and RS485 interfaces
LED status display
Approvals
CE
Popular items
DCMHT10SS, Wachendorff
DCMHT10SS Miniature Data Logger, Temperature/Humidity
Waterproof stainless steel housing
Programmable start and stop times
Easy export of measured data to EXCEL
Required accessories
DCMIFC200: USB interface and software (RS stock no.:
470-250
)
Measurement range
-40 → +80 °C
0 → 100% RH
Resolution
0.1 °C
0.5% RH
Accuracy
±0.5 °C
±3% RH
Measurement interval
2 sec. → 12 hrs.
memory
21845 measured values
Sensor
Integrated semiconductor sensor
Power supply
3.6 V lithium battery (included)
Type Life span of approx. 1 year
Dimensions
138 mm length, 26 mm diameter
Weight
285 g
Popular items
WDG58B-1024-ABN-I05-K3, Wachendorff
Rotary transducer WDG58B, incremental, shaft, 58 mm
Recording of rpm, position, distance or speed
Sturdy industrial aluminium housing with clamping flange
High protection class according to DIN 40 050: IP65 (shaft), IP67 (cover)
Very high axial and radial loads
Early warning output
Highly precise chip analysis
Standards: DIN VDE 0160
Popular items
WDG58B-2500-ABN-G24-K3, Wachendorff
Rotary transducer WDG58B, incremental, shaft, 58 mm
Recording of rpm, position, distance or speed
Sturdy industrial aluminium housing with clamping flange
High protection class according to DIN 40 050: IP65 (shaft), IP67 (cover)
Very high axial and radial loads
Early warning output
Highly precise chip analysis
Standards: DIN VDE 0160
Popular items
WDGA58E121643IEUB01BI2AHV, Wachendorff
The Wachendorff Universal Industrial Ethernet encoder with PROFINET or EtherCAT suitable for most hollow or solid shaft applications. Including: adapter sleeves 12 to 10 and 8 mm, shaft adapter from hollowshaft to 10 and 8 mm solid shaft.
Standard range and customer versions
Maximum permissible loads
48-hour express production
Made in Germany
Worldwide distributor network
Popular items
WDG58B-500-ABN-G24-K3, Wachendorff
Rotary transducer WDG58B, incremental, shaft, 58 mm
Recording of rpm, position, distance or speed
Sturdy industrial aluminium housing with clamping flange
High protection class according to DIN 40 050: IP65 (shaft), IP67 (cover)
Very high axial and radial loads
Early warning output
Highly precise chip analysis
Standards: DIN VDE 0160
Popular items
HD67078-B2-20, Wachendorff
The Wachendorff configurable gateway enables communication between M-Bus participants up to max. 80 M-Bus slaves and a Profinet master. You can use this to make the M-Bus data from up to 80 M-Bus slaves available to a Profinet master. It is easily configurable with the associated PC software via the Ethernet port. You assign the M-Bus variables to the bytes in the Profinet. Installation is simple and reliable on a DIN rail.
Configurable gateway for free variable management
Profinet data block size maximum 1,440 bytes
High temperature range from -40 °C to +85 °C
Up to 80 M-Bus users can be connected
Galvanic isolation
Transmission of the configuration via Ethernet
New Items
New items
HD67117, Wachendorff
The Wachendorff repeaters solve your line extension problems and are ideal for galvanic isolation. They are suitable for use in motors and devices with electromagnetic interference. Suitable as a repeater in the following bus protocols CAN 2.0A & 2.0B, CANopen, DeviceNet, and corresponds to the generic standard ISO 11898. Internal data processing is carried out using a 16-bit microprocessor. Programming the transmission rate on two sides is basically possible, with the maximum transmission rate being 1 Mbps at 25 meters. Several devices can be inserted in the same network. The DIN rail mounting and the plug-in screw terminals ensure quick and safe installation and problem-free wiring of the device.
Intended for professional use
Enables expansion of a line segment
Galvanic isolation of the CAN branches
Extension of the number of nodes
Different transmission rates at CAN branches
Protocol independent
New items
HD67551, Wachendorff
The Wachendorff configurable gateway CANopen to Profibus DP enables communication between 2 independent, different bus technologies. It is easy to configure with the associated PC software via the RS232 interface. The internal data processing is done with a 16-bit microprocessor. It is fundamentally possible to set different transmission rates, with the maximum transmission rate being 12 Mbps on the Profibus side. Installation is simple and reliable on DIN rails.
Configurable gateway for professional applications
Gateway/Bridge for CANopen on Profibus DP
Galvanic isolation
Different baud rates
New items
UR48483A, Wachendorff
Wachendorff Universal PID-Controller UR4848xA
PID-Controller in 48 mm x 48 mm format
Universal input for process signals, thermocouples, Pt100, Pt500, Pt1000 and RTD
New items
RS_795-1056, Wachendorff
Rotary transducer WDG58B, incremental, shaft, 58 mm
Recording of rpm, position, distance or speed
Sturdy industrial aluminium housing with clamping flange
High protection class according to DIN 40 050: IP65 (shaft), IP67 (cover)
Very high axial and radial loads
Early warning output
Highly precise chip analysis
Standards: DIN VDE 0160
New items
TI327401, Wachendorff
TI327401 - Multifunktion Timer
The compact small timer TI327401 is settable in 5 different modes: Timer-ON, Timer-OFF, Pause-Work, Oscillator, PWM (time-proportioned output), all options with independent setting of ON-OFF times. 3 digital inputs are available (NPN/PNP/Potential free contact) for external commands like Start, Stop, Reset; one input is also analogic in order to allow the modification of working times by external potentiometer.
Due to the 5 different time bases (hundredths, tenths, seconds, minutes, hours), the timer is usable for a lot of different applications. In addition to an excellent cost effectiveness and high quality, the timer offers a rugged, compact housing and a brilliant display.
Timer in 32 mm x 74 mm format
5 different operation modes
2-line LED display
Two red indicators for status relay outputs and a yellow indicator for serial communication
Easy programming by front keys or software
32 x 74 mm format
Two relay outputs
Universal AC/DC power supply
Programming kit with USB cable available (stock-no.
819-9745
)
New items
PM001601, Wachendorff
WZSG - Measuring transducer for DMS
Measuring transducer for DMS and load cells
Normal signal outputs
Digital input and output
RS232 and RS485 interfaces
LED status display
Approvals
CE
New items
DCMHT10SS, Wachendorff
DCMHT10SS Miniature Data Logger, Temperature/Humidity
Waterproof stainless steel housing
Programmable start and stop times
Easy export of measured data to EXCEL
Required accessories
DCMIFC200: USB interface and software (RS stock no.:
470-250
)
Measurement range
-40 → +80 °C
0 → 100% RH
Resolution
0.1 °C
0.5% RH
Accuracy
±0.5 °C
±3% RH
Measurement interval
2 sec. → 12 hrs.
memory
21845 measured values
Sensor
Integrated semiconductor sensor
Power supply
3.6 V lithium battery (included)
Type Life span of approx. 1 year
Dimensions
138 mm length, 26 mm diameter
Weight
285 g
New items
WDG58B-1024-ABN-I05-K3, Wachendorff
Rotary transducer WDG58B, incremental, shaft, 58 mm
Recording of rpm, position, distance or speed
Sturdy industrial aluminium housing with clamping flange
High protection class according to DIN 40 050: IP65 (shaft), IP67 (cover)
Very high axial and radial loads
Early warning output
Highly precise chip analysis
Standards: DIN VDE 0160
New items
WDG58B-2500-ABN-G24-K3, Wachendorff
Rotary transducer WDG58B, incremental, shaft, 58 mm
Recording of rpm, position, distance or speed
Sturdy industrial aluminium housing with clamping flange
High protection class according to DIN 40 050: IP65 (shaft), IP67 (cover)
Very high axial and radial loads
Early warning output
Highly precise chip analysis
Standards: DIN VDE 0160
New items
WDGA58E121643IEUB01BI2AHV, Wachendorff
The Wachendorff Universal Industrial Ethernet encoder with PROFINET or EtherCAT suitable for most hollow or solid shaft applications. Including: adapter sleeves 12 to 10 and 8 mm, shaft adapter from hollowshaft to 10 and 8 mm solid shaft.
Standard range and customer versions
Maximum permissible loads
48-hour express production
Made in Germany
Worldwide distributor network
New items
WDG58B-500-ABN-G24-K3, Wachendorff
Rotary transducer WDG58B, incremental, shaft, 58 mm
Recording of rpm, position, distance or speed
Sturdy industrial aluminium housing with clamping flange
High protection class according to DIN 40 050: IP65 (shaft), IP67 (cover)
Very high axial and radial loads
Early warning output
Highly precise chip analysis
Standards: DIN VDE 0160
New items
HD67078-B2-20, Wachendorff
The Wachendorff configurable gateway enables communication between M-Bus participants up to max. 80 M-Bus slaves and a Profinet master. You can use this to make the M-Bus data from up to 80 M-Bus slaves available to a Profinet master. It is easily configurable with the associated PC software via the Ethernet port. You assign the M-Bus variables to the bytes in the Profinet. Installation is simple and reliable on a DIN rail.
Configurable gateway for free variable management
Profinet data block size maximum 1,440 bytes
High temperature range from -40 °C to +85 °C
Up to 80 M-Bus users can be connected
Galvanic isolation
Transmission of the configuration via Ethernet
Don’t hesitate to ask questions for better clarification.