Featured Products
Electromagnetic Knitted Wire Mesh Tape From UVOX, a 2-ply knitted wire mesh suitable for the electromagneti...
EMI / RFI braided screen Double-thick metal mesh screens, suited for electromagnetic shielding and weight c...
Copper Beryllium Finger Strips Copper beryllium finger strips provide a spring wiping action coupled with l...
Wires Embedded in Silicone A flat gasket material manufactured from Monel wires chemically bonded in a sili...
Gull wing clips These gull wing clips offer easy mounting for one or two transistors. They offer a high mounting pressure to the centre of the t...
Adhesive seal Adhesive seal for electromagnetic protection of cabinets and cases. Made from a neoprene component for the seal and metal braiding...
Wires Embedded in Silicone A flat gasket material manufactured from Monel wires chemically bonded in a sili...
Copper Beryllium Finger Strips Copper beryllium finger strips provide a spring wiping action coupled with l...
Shielding plates Plates offering electromagnetic protection when making case seals. Made from a carbon sheet and ni...
Panel Edge Gasket A carbon loaded silicone elastomer that provides electrical conductivity at low cost Desi...
Electromagnetic Knitted Wire Mesh Tape From UVOX, a 2-ply knitted wire mesh suitable for the electromagnetic shielding and grounding of electric...
Shielding seals Made from beryllium copper, these seals are easy to use. Made from a double-sided adhesive,...
Popular Categories For UVOX
Popular Items
Popular items
KWM-1-5006, UVOX
Electromagnetic Knitted Wire Mesh Tape
From UVOX, a 2-ply knitted wire mesh suitable for the electromagnetic shielding and grounding of electrical and electronic cable assemblies and harnesses. As well as providing mechanical protection, the sleeving is suitable for both indoor and outdoor applications and is resistant to oil and fire.
Manufactured from 0.11mm diameter monel (Nickel-Copper alloy) wire
A 50% overlap is recommended, providing a good 4-layer shield
Popular items
WMC-2-2-(ECM-5-2-4003)-AC, UVOX
Adhesive seal
Adhesive seal for electromagnetic protection of cabinets and cases.
Made from a neoprene component for the seal and metal braiding.
An IP 65 seal index can be obtained with this seal.
Frequency
Field
Attenuation (dB)
100 kHz
Magnetic
63
1 MHz
Magnetic
88
1 MHz
Electric
> 128
10 MHz
Electric
> 124
100 MHz
Electric
110
400 MHz
Flat wave
90
1 GHz
Flat wave
72
10 GHz
Flat wave
32
Adhesion: 670 N/m
Length: 10 m
Operating temperature: 0°C to +50°C
Popular items
WIS-1-1-015-100-NA, UVOX
Wires Embedded in Silicone
A flat gasket material manufactured from Monel wires chemically bonded in a silicone elastomer perpendicular to its surface at a density of 140 point contacts per cm2.
This combination provides excellent electromagnetic attenuation through the low resistance, point to point wire contacts
Custom gaskets can easily be made by cutting with a blade
Environmental sealing up to IP65
Service temperature range -65°C to +200°C
Shielding Effectiveness
Magnetic Field
55db @ 10kHz, 83dB @ 100kHz, >102dB @ 1MHz
Electric Field
>121dB @ 100kHz,> 141dB @ 1MHz, >120dB @ 10MHz, >140dB @ 100MHz
Plane Wave
>102dB @ 400MHz, 95dB @ 1GHz, 60dB @ 10GHz
Dimensions (mm)
Stock No.
Type
L
W
Thickness
264-9281
Solid silicone
900
100
1.5
264-9354
Sponge silicone
900
50
2
Note
Gasket material suitable for use in applications requiring conformance with the Electromagnetic Compatibility Directive (EC Directive 89/336/EC)
Popular items
TMC405-ZP, UVOX
Gull wing clips
These gull wing clips offer easy mounting for one or two transistors.
They offer a high mounting pressure to the centre of the transistor housing, to provide maximum heat transfer.
The screws are not supplied.
Popular items
FS-018-086-SA-T, UVOX
Copper Beryllium Finger Strips
Copper beryllium finger strips provide a spring wiping action coupled with low electrical resistance
Ideal as an EMC gasket or earthing contact - optimum performance is achieved at 25% compression
Suitable for most enclosure door, cabinet or box applications where frequent opening and closing is required without an environmental seal
Attachment via self-adhesive strip with high tack acrylic adhesive (16.3N/10mm)
Service temperature -55°C → +230°C
Supplied in 500mm lengths with corrosion-resistant bright tin finish
Popular items
WIS-2-1-020-050-NA, UVOX
Wires Embedded in Silicone
A flat gasket material manufactured from Monel wires chemically bonded in a silicone elastomer perpendicular to its surface at a density of 140 point contacts per cm2.
This combination provides excellent electromagnetic attenuation through the low resistance, point to point wire contacts
Custom gaskets can easily be made by cutting with a blade
Environmental sealing up to IP65
Service temperature range -65°C to +200°C
Shielding Effectiveness
Magnetic Field
55db @ 10kHz, 83dB @ 100kHz, >102dB @ 1MHz
Electric Field
>121dB @ 100kHz,> 141dB @ 1MHz, >120dB @ 10MHz, >140dB @ 100MHz
Plane Wave
>102dB @ 400MHz, 95dB @ 1GHz, 60dB @ 10GHz
Dimensions (mm)
Stock No.
Type
L
W
Thickness
264-9281
Solid silicone
900
100
1.5
264-9354
Sponge silicone
900
50
2
Note
Gasket material suitable for use in applications requiring conformance with the Electromagnetic Compatibility Directive (EC Directive 89/336/EC)
Popular items
FS-036-094-SA-T, UVOX
Copper Beryllium Finger Strips
Copper beryllium finger strips provide a spring wiping action coupled with low electrical resistance
Ideal as an EMC gasket or earthing contact - optimum performance is achieved at 25% compression
Suitable for most enclosure door, cabinet or box applications where frequent opening and closing is required without an environmental seal
Attachment via self-adhesive strip with high tack acrylic adhesive (16.3N/10mm)
Service temperature -55°C → +230°C
Supplied in 500mm lengths with corrosion-resistant bright tin finish
Popular items
KWM-2-5003, UVOX
EMI / RFI braided screen
Double-thick metal mesh screens, suited for electromagnetic shielding and weight continuity of assemblies or electric cable harnesses.
For effective shielding, both ends must be earthed.
Frequency
Field
Attenuation (dB)
1 MHz
Electric
69
10 MHz
Electric
62
100 MHz
Electric
50
Nominal thickness: 0.4 mm ±0.05
Popular items
CSR-07-25X25, UVOX
Shielding plates
Plates offering electromagnetic protection when making case seals.
Made from a carbon sheet and nickel, assembled using an adhesive.
Highly conductive plates with a very broad temperature range.
Frequency
Field
Attenuation (dB)
10 kHz
Magnetic
49
100 kHz
Magnetic
63
1 MHz
Magnetic
76
1 MHz
Electric
> 128
10 MHz
Electric
> 124
100 MHz
Electric
> 135
400 MHz
Flat wave
> 114
1 GHz
Flat wave
87
10 GHz
Flat wave
85
Resistivity: 0.005 Ωcm
Hardness: 85
Tear resistance: 3.5 N/mm
Dimensions (cm): 25 x 25
Operating temperature: –200 °C → +500 °C
Popular items
CLS-9001, UVOX
Panel Edge Gasket
A carbon loaded silicone elastomer that provides electrical conductivity at low cost
Designed for panel edge applications giving broad band shielding
Ideal for grounding of electrostatic and corona charges in equipment
Silicone compound conforms to UL94HB
Environmental protection up to IP65
Service temperature -55°C to +200°C
Supplied in 5m lengths
Dimensions (mm)
A
B
C
D
10.0
1.5 ± 0.1
7.0
6.0
Popular items
FS-064-198-SA-T, UVOX
Shielding seals
Made from beryllium copper, these seals are easy to use.
Made from a double-sided adhesive, which protects against both electromagnetic and radio-electrical interference.
Ideal for chassis, box assemblies, speakers, panel modules and doors on a Faraday cage etc.
Efficiency greater than 46 dB at 14 kHz and 108 dB at 10 GHz.
Galvanic compatibility is achieved through a large range of surface treatments.
High solvent resistance.
Materials:
- Beryllium: 1.8 to 2%
- cobalt nickel: 0.2% min.
- cobalt nickel iron: 0.6%
Length:
50 cm
Service life:
42 to 47 x 10
8
operations
Operating temperature:
–55°C to +230°C
Popular items
KWM-1-5003, UVOX
Electromagnetic Knitted Wire Mesh Tape
From UVOX, a 2-ply knitted wire mesh suitable for the electromagnetic shielding and grounding of electrical and electronic cable assemblies and harnesses. As well as providing mechanical protection, the sleeving is suitable for both indoor and outdoor applications and is resistant to oil and fire.
Manufactured from 0.11mm diameter monel (Nickel-Copper alloy) wire
A 50% overlap is recommended, providing a good 4-layer shield
New Items
New items
KWM-1-5006, UVOX
Electromagnetic Knitted Wire Mesh Tape
From UVOX, a 2-ply knitted wire mesh suitable for the electromagnetic shielding and grounding of electrical and electronic cable assemblies and harnesses. As well as providing mechanical protection, the sleeving is suitable for both indoor and outdoor applications and is resistant to oil and fire.
Manufactured from 0.11mm diameter monel (Nickel-Copper alloy) wire
A 50% overlap is recommended, providing a good 4-layer shield
New items
KWM-2-5003, UVOX
EMI / RFI braided screen
Double-thick metal mesh screens, suited for electromagnetic shielding and weight continuity of assemblies or electric cable harnesses.
For effective shielding, both ends must be earthed.
Frequency
Field
Attenuation (dB)
1 MHz
Electric
69
10 MHz
Electric
62
100 MHz
Electric
50
Nominal thickness: 0.4 mm ±0.05
New items
FS-018-086-SA-T, UVOX
Copper Beryllium Finger Strips
Copper beryllium finger strips provide a spring wiping action coupled with low electrical resistance
Ideal as an EMC gasket or earthing contact - optimum performance is achieved at 25% compression
Suitable for most enclosure door, cabinet or box applications where frequent opening and closing is required without an environmental seal
Attachment via self-adhesive strip with high tack acrylic adhesive (16.3N/10mm)
Service temperature -55°C → +230°C
Supplied in 500mm lengths with corrosion-resistant bright tin finish
New items
WIS-2-1-020-050-NA, UVOX
Wires Embedded in Silicone
A flat gasket material manufactured from Monel wires chemically bonded in a silicone elastomer perpendicular to its surface at a density of 140 point contacts per cm2.
This combination provides excellent electromagnetic attenuation through the low resistance, point to point wire contacts
Custom gaskets can easily be made by cutting with a blade
Environmental sealing up to IP65
Service temperature range -65°C to +200°C
Shielding Effectiveness
Magnetic Field
55db @ 10kHz, 83dB @ 100kHz, >102dB @ 1MHz
Electric Field
>121dB @ 100kHz,> 141dB @ 1MHz, >120dB @ 10MHz, >140dB @ 100MHz
Plane Wave
>102dB @ 400MHz, 95dB @ 1GHz, 60dB @ 10GHz
Dimensions (mm)
Stock No.
Type
L
W
Thickness
264-9281
Solid silicone
900
100
1.5
264-9354
Sponge silicone
900
50
2
Note
Gasket material suitable for use in applications requiring conformance with the Electromagnetic Compatibility Directive (EC Directive 89/336/EC)
New items
TMC405-ZP, UVOX
Gull wing clips
These gull wing clips offer easy mounting for one or two transistors.
They offer a high mounting pressure to the centre of the transistor housing, to provide maximum heat transfer.
The screws are not supplied.
New items
WMC-2-2-(ECM-5-2-4003)-AC, UVOX
Adhesive seal
Adhesive seal for electromagnetic protection of cabinets and cases.
Made from a neoprene component for the seal and metal braiding.
An IP 65 seal index can be obtained with this seal.
Frequency
Field
Attenuation (dB)
100 kHz
Magnetic
63
1 MHz
Magnetic
88
1 MHz
Electric
> 128
10 MHz
Electric
> 124
100 MHz
Electric
110
400 MHz
Flat wave
90
1 GHz
Flat wave
72
10 GHz
Flat wave
32
Adhesion: 670 N/m
Length: 10 m
Operating temperature: 0°C to +50°C
New items
WIS-1-1-015-100-NA, UVOX
Wires Embedded in Silicone
A flat gasket material manufactured from Monel wires chemically bonded in a silicone elastomer perpendicular to its surface at a density of 140 point contacts per cm2.
This combination provides excellent electromagnetic attenuation through the low resistance, point to point wire contacts
Custom gaskets can easily be made by cutting with a blade
Environmental sealing up to IP65
Service temperature range -65°C to +200°C
Shielding Effectiveness
Magnetic Field
55db @ 10kHz, 83dB @ 100kHz, >102dB @ 1MHz
Electric Field
>121dB @ 100kHz,> 141dB @ 1MHz, >120dB @ 10MHz, >140dB @ 100MHz
Plane Wave
>102dB @ 400MHz, 95dB @ 1GHz, 60dB @ 10GHz
Dimensions (mm)
Stock No.
Type
L
W
Thickness
264-9281
Solid silicone
900
100
1.5
264-9354
Sponge silicone
900
50
2
Note
Gasket material suitable for use in applications requiring conformance with the Electromagnetic Compatibility Directive (EC Directive 89/336/EC)
New items
FS-036-094-SA-T, UVOX
Copper Beryllium Finger Strips
Copper beryllium finger strips provide a spring wiping action coupled with low electrical resistance
Ideal as an EMC gasket or earthing contact - optimum performance is achieved at 25% compression
Suitable for most enclosure door, cabinet or box applications where frequent opening and closing is required without an environmental seal
Attachment via self-adhesive strip with high tack acrylic adhesive (16.3N/10mm)
Service temperature -55°C → +230°C
Supplied in 500mm lengths with corrosion-resistant bright tin finish
New items
CSR-07-25X25, UVOX
Shielding plates
Plates offering electromagnetic protection when making case seals.
Made from a carbon sheet and nickel, assembled using an adhesive.
Highly conductive plates with a very broad temperature range.
Frequency
Field
Attenuation (dB)
10 kHz
Magnetic
49
100 kHz
Magnetic
63
1 MHz
Magnetic
76
1 MHz
Electric
> 128
10 MHz
Electric
> 124
100 MHz
Electric
> 135
400 MHz
Flat wave
> 114
1 GHz
Flat wave
87
10 GHz
Flat wave
85
Resistivity: 0.005 Ωcm
Hardness: 85
Tear resistance: 3.5 N/mm
Dimensions (cm): 25 x 25
Operating temperature: –200 °C → +500 °C
New items
CLS-9001, UVOX
Panel Edge Gasket
A carbon loaded silicone elastomer that provides electrical conductivity at low cost
Designed for panel edge applications giving broad band shielding
Ideal for grounding of electrostatic and corona charges in equipment
Silicone compound conforms to UL94HB
Environmental protection up to IP65
Service temperature -55°C to +200°C
Supplied in 5m lengths
Dimensions (mm)
A
B
C
D
10.0
1.5 ± 0.1
7.0
6.0
New items
KWM-1-5003, UVOX
Electromagnetic Knitted Wire Mesh Tape
From UVOX, a 2-ply knitted wire mesh suitable for the electromagnetic shielding and grounding of electrical and electronic cable assemblies and harnesses. As well as providing mechanical protection, the sleeving is suitable for both indoor and outdoor applications and is resistant to oil and fire.
Manufactured from 0.11mm diameter monel (Nickel-Copper alloy) wire
A 50% overlap is recommended, providing a good 4-layer shield
New items
FS-064-198-SA-T, UVOX
Shielding seals
Made from beryllium copper, these seals are easy to use.
Made from a double-sided adhesive, which protects against both electromagnetic and radio-electrical interference.
Ideal for chassis, box assemblies, speakers, panel modules and doors on a Faraday cage etc.
Efficiency greater than 46 dB at 14 kHz and 108 dB at 10 GHz.
Galvanic compatibility is achieved through a large range of surface treatments.
High solvent resistance.
Materials:
- Beryllium: 1.8 to 2%
- cobalt nickel: 0.2% min.
- cobalt nickel iron: 0.6%
Length:
50 cm
Service life:
42 to 47 x 10
8
operations
Operating temperature:
–55°C to +230°C
Don’t hesitate to ask questions for better clarification.