Featured Products
Lambda GEL COH-6000LVC Series Lambda GEL COH-6000LVC series sheet type thermal conductive gel is a very soft, tacky...
Insulator SF-2 to SF-50 Series SF series to be used in compression only applications. These mounts have a...
Gel Tape and Chips Silicone Gel Tape and Chips that can provide shock and vibration protection as well as r...
Gel Tape and Chips Silicone Gel Tape and Chips that can provide shock and vibration protection as well as r...
Insulator SF-2 to SF-50 Series SF series to be used in compression only applications. These mounts have a...
Soft Silicone Gel Mounts Soft silicone gel mounts for vibration isolation, shock absorption and noise reduc...
Insulator SF-2 to SF-50 Series SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt...
Lambda GEL COH-1002 Series Lambda GEL COH-1002 series sheet type thermal conductive gel is a very soft, tacky gap f...
Lambda GEL COH-1002LVC Series Lambda GEL COH-1002LVC series sheet type thermal conductive gel is a very soft, tacky...
Gel Bushes Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instru...
Gel Damping Mat SN Series Silicone Gel damping mats for table top vibration and shock isolation 4 sheet typ...
Alpha GEL A range of vibration isolating gel foam pads containing Alpha Gel®, a revolutionary gel that has outstanding shock absorbency, excelle...
Popular Categories For Taica
Popular Items
Popular items
Lambda GEL COH-6000LVC 400*400*t0.5, Taica
Lambda GEL COH-6000LVC Series
Lambda GEL COH-6000LVC series sheet type thermal conductive gel is a very soft, tacky gap filler that facilitates excellent heat dissipation whilst minimising heat resistance. The COH-6000LVC series is usable over wide temperature ranges, is flame retardant and electrically insulating. Ideal applications include those requiring efficient shock absorption.
Popular items
SF-5, Taica
Insulator SF-2 to SF-50 Series
SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt.
All SUS versions are stainless steel equivalents.
Features and Benefits
Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts
Also Absorbs Shock and Reduces Noise
Base Mounting with Top Stud Fixing
Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg
Strong Bond Between Metal Parts and Silicon
Excellent for Outdoor Use
SF-2, SF-5 and SF-10 have stainless steel bottom plate
SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions
Application Information
Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment.
SF-30 and SF-50
Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.
Height h (mm)
22
Top plate Dia. (mm)
30
Bottom plate W x L (mm)
36 x 60
Stud length (mm)
18
Stud thread
M6
Fixing centres (mm)
45
Fixing hole W x L (mm)
4.2 x 6
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
Stock no.
SF-2
5 to 13
15 to 10
12 to 13
From 22
474-868
SF-5
13 to 30
13 to 9
15 to 16
From 19
474-886
SF-10
30 to 50
12 to 9
19 to 21
From 17
474-880
SF-30
100 to 140
8 to 9
18 to 19
From 13
855-2219
SF-50
120 to 300
10 to 15
12 to 18
From 15
474-814
Note
A bag contains 1 item
Silicone Low Frequency Mounts
Warning
Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads.
Popular items
GT-2, Taica
Gel Tape and Chips
Silicone Gel Tape and Chips that can provide shock and vibration protection as well as reducing noise
Simply cut to size, remove backing and attach where necessary
Adhesive on one side of the Tape or Chip
A selection (width/thickness) available to suit different applications
Ideal where space is restricted and mounts/bushes are not suitable
Low compression set
High temperature resistance -40 to 100°C
Excellent weathering properties, ozone resistant, UV resistant and chemically resistant and out door use
Ideal for light component isolation
Chips: 25 pieces per sheet, price is for one sheet
Gel Tape Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GT-1
1,000
10
1
474-763
GT-2
1,000
20
1
474-818
GT-3
1,000
10
2
474-808
GT-4
1,000
20
2
474-791
GT-5
1,000
10
3
474-858
GT-6
1,000
20
3
474-795
Gel Chip Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GC-1
10
10
3
474-852
GC-2
10
10
5
474-842
GC-3
15
15
3
474-846
GC-4
15
15
5
474-836
GC-5
15
15
10
474-830
GC-6
20
20
3
474-820
GC-7
20
20
5
474-824
GC-8
20
20
10
474-767
Popular items
GC-7, Taica
Gel Tape and Chips
Silicone Gel Tape and Chips that can provide shock and vibration protection as well as reducing noise
Simply cut to size, remove backing and attach where necessary
Adhesive on one side of the Tape or Chip
A selection (width/thickness) available to suit different applications
Ideal where space is restricted and mounts/bushes are not suitable
Low compression set
High temperature resistance -40 to 100°C
Excellent weathering properties, ozone resistant, UV resistant and chemically resistant and out door use
Ideal for light component isolation
Chips: 25 pieces per sheet, price is for one sheet
Gel Tape Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GT-1
1,000
10
1
474-763
GT-2
1,000
20
1
474-818
GT-3
1,000
10
2
474-808
GT-4
1,000
20
2
474-791
GT-5
1,000
10
3
474-858
GT-6
1,000
20
3
474-795
Gel Chip Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GC-1
10
10
3
474-852
GC-2
10
10
5
474-842
GC-3
15
15
3
474-846
GC-4
15
15
5
474-836
GC-5
15
15
10
474-830
GC-6
20
20
3
474-820
GC-7
20
20
5
474-824
GC-8
20
20
10
474-767
Popular items
SF-10 SUS, Taica
Insulator SF-2 to SF-50 Series
SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt.
All SUS versions are stainless steel equivalents.
Features and Benefits
Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts
Also Absorbs Shock and Reduces Noise
Base Mounting with Top Stud Fixing
Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg
Strong Bond Between Metal Parts and Silicon
Excellent for Outdoor Use
SF-2, SF-5 and SF-10 have stainless steel bottom plate
SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions
Application Information
Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment.
SF-30 and SF-50
Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.
Height h (mm)
22
Top plate Dia. (mm)
30
Bottom plate W x L (mm)
36 x 60
Stud length (mm)
18
Stud thread
M6
Fixing centres (mm)
45
Fixing hole W x L (mm)
4.2 x 6
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
Stock no.
SF-2
5 to 13
15 to 10
12 to 13
From 22
474-868
SF-5
13 to 30
13 to 9
15 to 16
From 19
474-886
SF-10
30 to 50
12 to 9
19 to 21
From 17
474-880
SF-30
100 to 140
8 to 9
18 to 19
From 13
855-2219
SF-50
120 to 300
10 to 15
12 to 18
From 15
474-814
Note
A bag contains 1 item
Silicone Low Frequency Mounts
Warning
Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads.
Popular items
MN-5 SUS, Taica
Soft Silicone Gel Mounts
Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene.
All SUS versions are stainless steel equivalents.
Features and Benefits
Fixable by two vertical slotted bolts
Strong Bond Between Metal Parts and Silicone
High Temperature Resistance -40 to 200°C
Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant
Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads
Application Information
Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.
Dimensions
Type
Height h (mm)
Top plate dia. (mm)
Bottom plate dia. (mm)
Stud length (mm)
Screw thread
A
13
12
18
15
M4
B
18
12
18
15
M4
C
18
20
25
20
M6
MN 3
22
24
24
18
M6
MN 5
22
24
24
18
M6
MN 7
22
24
24
18
M6
MN 10
22
24
24
18
M6
TW
25
28
35
17
M6
BG 7
23
28
28
12
M3
BG 8
23
28
28
12
M6
Comparison table
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. frequency (Hz)
A
2.0 to 3.2
16 to 15
12
23
B
1.6 to 2.4
13 to 11
13 to 12
18
C
3.2 to 8.0
14 to 12
13 to 12
20
MN 3
8 to 14
12 to 10
12
17
MN 5
14 to 22
11 to 10
14 to 13
16
MN 7
22 to 34
11 to 10
16 to 15
16
MN 10
34 to 50
11 to 10
20 to 18
16
TW
50 to 100
10 to 8
20 to 19
14
BG 7
3.2 to 6.4
10 to 8
16 to 14
14
BG 8
6 to 16
10 to 8
18 to 16
14
Note
A bag contains 1 item
Silicone Low Frequency Male/Male Mounts
Popular items
SF-50, Taica
Insulator SF-2 to SF-50 Series
SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt.
All SUS versions are stainless steel equivalents.
Features and Benefits
Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts
Also Absorbs Shock and Reduces Noise
Base Mounting with Top Stud Fixing
Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg
Strong Bond Between Metal Parts and Silicon
Excellent for Outdoor Use
SF-2, SF-5 and SF-10 have stainless steel bottom plate
SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions
Application Information
Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment.
SF-30 and SF-50
Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.
Height h (mm)
22
Top plate Dia. (mm)
30
Bottom plate W x L (mm)
36 x 60
Stud length (mm)
18
Stud thread
M6
Fixing centres (mm)
45
Fixing hole W x L (mm)
4.2 x 6
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
Stock no.
SF-2
5 to 13
15 to 10
12 to 13
From 22
474-868
SF-5
13 to 30
13 to 9
15 to 16
From 19
474-886
SF-10
30 to 50
12 to 9
19 to 21
From 17
474-880
SF-30
100 to 140
8 to 9
18 to 19
From 13
855-2219
SF-50
120 to 300
10 to 15
12 to 18
From 15
474-814
Note
A bag contains 1 item
Silicone Low Frequency Mounts
Warning
Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads.
Popular items
Lambda GEL COH-1002 400*400*t0.5, Taica
Lambda GEL COH-1002 Series
Lambda GEL COH-1002 series sheet type thermal conductive gel is a very soft, tacky gap filler that facilitates excellent heat dissipation whilst minimising heat resistance. The COH-1002 series is usable over wide temperature ranges, is flame retardant and electrically insulating. Suitable for wide area applications such as power modules.
Popular items
Lambda GEL COH-1002LVC 400*400*t2.0, Taica
Lambda GEL COH-1002LVC Series
Lambda GEL COH-1002LVC series sheet type thermal conductive gel is a very soft, tacky gap filler that facilitates excellent heat dissipation whilst minimising heat resistance. The COH-1002LVC series is usable over wide temperature ranges, is flame retardant and electrically insulating. Suitable for wide area applications such as power modules.
Popular items
GEL Bush S-6, Taica
Gel Bushes
Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C.
Features and Benefits
Through Bolts Type
Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B
Minimum Horizontal Deflection
Split Unit to Make Installation Easier and to Suit Varying Material Thickness
Excellent Weathering Properties, Ozone Resistant
No Loss of Performance After Repeated Compression
UV Resistant and Chemically Resistant and Out Door Use
Product Application Information
Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.
Dimensions
Type
Bore dia. (mm)
OD dia. (mm)
Flange height (mm)
Material hole dia. (mm)
Material thickness (mm)
Gel type
Usable bolts (smaller than)
S
4
11
3
7
3.5
7
M3
A-1
5
14
4
9
4
6/5
M3
A-2
5
14
4
9
4
6
M3
B-1
6
25
5
14
6.5
6
M4
B-2
6
25
5
14
6.5
8
M4
Comparison table
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
S
0.2 to 0.75
64 to 42
7 to 9
0.2kg from 90
0.75kg from 60
A-1
0.5 to 2.5
67 to 35
9 to 10
0.5kg from 95
2.5kg from 50
A-2
2.5 to 4.0
49 to 37
15 to 16
2.5kg from 70
4.0kg from 55
B-1
4 to 15
49 to 23
15 to 17
4kg from 70
15kg from 35
B-2
15 to 32
38 to 20
19 to 23
15kg from 40
32kg from 25
Popular items
SN-50, Taica
Gel Damping Mat SN Series
Silicone Gel damping mats for table top vibration and shock isolation
4 sheet types to cover loads from 0.5kg up to 80kg
Distributes load evenly
Colour coding for easy recognition and is also portable
Low cost investment to support quality and extend product life
Divide for light loads and add for heavier loads
This soft gel absorbs micro and low frequency vibration not eliminated by traditional rubber and other damping materials as well as absorbing shock
High temperature resistance -40 to 200°C
Excellent weathering properties, ozone resistant, UV resistant and chemically resistant and out door use
Contains nothing harmful, is environmentally friendly and gives off no toxic fumes when burnt
Ideal for protecting lab equipment, servers, and precision equipment from knocks and vibration
Peel off PET film before use
Dimensions
Type
Sheet area (mm)
Sheet overall height (mm)
Colour code
SN-2
100 x 100
7
yellow
SN-5
100 x 100
7
green
SN-15
100 x 100
7
orange
SN-50
100 x 100
7
blue
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
Warp (mm)
SN-2
0.5 → 2.5
27 → 21
6
38+
1.4 → 3.0
SN-5
2 → 5
29 → 23
8
40+
1.5 → 2.5
SN-15
5 → 15
26 → 18
13
37+
0.7 → 2.0
SN-50
15 → 50
22 → 15
20 → 18
30+
0.7 → 2.0
Popular items
NP GEL WHITE, Taica
Alpha GEL
A range of vibration isolating gel foam pads containing Alpha Gel®, a revolutionary gel that has outstanding shock absorbency, excellent workability and long-term stability and durability. The NP Gel has excellent temperature performance from -40°C up to 200°C, and low compression set compared to most foam materials.
Features and Benefits
Enhanced Shock Absorption
Resistance to Ozone
Wide Operating Temperature Range
Lightweight
Low Compression Set
Flame Retardant
Product Application Information
The Alpha Gel has amazing shock absorbing capabilities making it ideal for sports and industrial applications. Alpha Gels easy adjustability in shape makes vibration damping ideal for light loads and microvibration.
Applications include shoe cushioning, mattresses, pen grips, miniaturised products and noise suppression under precision instruments.
Note
Powder is applied to the surface.
New Items
New items
SF-5, Taica
Insulator SF-2 to SF-50 Series
SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt.
All SUS versions are stainless steel equivalents.
Features and Benefits
Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts
Also Absorbs Shock and Reduces Noise
Base Mounting with Top Stud Fixing
Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg
Strong Bond Between Metal Parts and Silicon
Excellent for Outdoor Use
SF-2, SF-5 and SF-10 have stainless steel bottom plate
SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions
Application Information
Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment.
SF-30 and SF-50
Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.
Height h (mm)
22
Top plate Dia. (mm)
30
Bottom plate W x L (mm)
36 x 60
Stud length (mm)
18
Stud thread
M6
Fixing centres (mm)
45
Fixing hole W x L (mm)
4.2 x 6
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
Stock no.
SF-2
5 to 13
15 to 10
12 to 13
From 22
474-868
SF-5
13 to 30
13 to 9
15 to 16
From 19
474-886
SF-10
30 to 50
12 to 9
19 to 21
From 17
474-880
SF-30
100 to 140
8 to 9
18 to 19
From 13
855-2219
SF-50
120 to 300
10 to 15
12 to 18
From 15
474-814
Note
A bag contains 1 item
Silicone Low Frequency Mounts
Warning
Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads.
New items
GC-7, Taica
Gel Tape and Chips
Silicone Gel Tape and Chips that can provide shock and vibration protection as well as reducing noise
Simply cut to size, remove backing and attach where necessary
Adhesive on one side of the Tape or Chip
A selection (width/thickness) available to suit different applications
Ideal where space is restricted and mounts/bushes are not suitable
Low compression set
High temperature resistance -40 to 100°C
Excellent weathering properties, ozone resistant, UV resistant and chemically resistant and out door use
Ideal for light component isolation
Chips: 25 pieces per sheet, price is for one sheet
Gel Tape Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GT-1
1,000
10
1
474-763
GT-2
1,000
20
1
474-818
GT-3
1,000
10
2
474-808
GT-4
1,000
20
2
474-791
GT-5
1,000
10
3
474-858
GT-6
1,000
20
3
474-795
Gel Chip Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GC-1
10
10
3
474-852
GC-2
10
10
5
474-842
GC-3
15
15
3
474-846
GC-4
15
15
5
474-836
GC-5
15
15
10
474-830
GC-6
20
20
3
474-820
GC-7
20
20
5
474-824
GC-8
20
20
10
474-767
New items
Lambda GEL COH-6000LVC 400*400*t0.5, Taica
Lambda GEL COH-6000LVC Series
Lambda GEL COH-6000LVC series sheet type thermal conductive gel is a very soft, tacky gap filler that facilitates excellent heat dissipation whilst minimising heat resistance. The COH-6000LVC series is usable over wide temperature ranges, is flame retardant and electrically insulating. Ideal applications include those requiring efficient shock absorption.
New items
GT-2, Taica
Gel Tape and Chips
Silicone Gel Tape and Chips that can provide shock and vibration protection as well as reducing noise
Simply cut to size, remove backing and attach where necessary
Adhesive on one side of the Tape or Chip
A selection (width/thickness) available to suit different applications
Ideal where space is restricted and mounts/bushes are not suitable
Low compression set
High temperature resistance -40 to 100°C
Excellent weathering properties, ozone resistant, UV resistant and chemically resistant and out door use
Ideal for light component isolation
Chips: 25 pieces per sheet, price is for one sheet
Gel Tape Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GT-1
1,000
10
1
474-763
GT-2
1,000
20
1
474-818
GT-3
1,000
10
2
474-808
GT-4
1,000
20
2
474-791
GT-5
1,000
10
3
474-858
GT-6
1,000
20
3
474-795
Gel Chip Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GC-1
10
10
3
474-852
GC-2
10
10
5
474-842
GC-3
15
15
3
474-846
GC-4
15
15
5
474-836
GC-5
15
15
10
474-830
GC-6
20
20
3
474-820
GC-7
20
20
5
474-824
GC-8
20
20
10
474-767
New items
SF-10 SUS, Taica
Insulator SF-2 to SF-50 Series
SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt.
All SUS versions are stainless steel equivalents.
Features and Benefits
Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts
Also Absorbs Shock and Reduces Noise
Base Mounting with Top Stud Fixing
Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg
Strong Bond Between Metal Parts and Silicon
Excellent for Outdoor Use
SF-2, SF-5 and SF-10 have stainless steel bottom plate
SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions
Application Information
Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment.
SF-30 and SF-50
Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.
Height h (mm)
22
Top plate Dia. (mm)
30
Bottom plate W x L (mm)
36 x 60
Stud length (mm)
18
Stud thread
M6
Fixing centres (mm)
45
Fixing hole W x L (mm)
4.2 x 6
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
Stock no.
SF-2
5 to 13
15 to 10
12 to 13
From 22
474-868
SF-5
13 to 30
13 to 9
15 to 16
From 19
474-886
SF-10
30 to 50
12 to 9
19 to 21
From 17
474-880
SF-30
100 to 140
8 to 9
18 to 19
From 13
855-2219
SF-50
120 to 300
10 to 15
12 to 18
From 15
474-814
Note
A bag contains 1 item
Silicone Low Frequency Mounts
Warning
Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads.
New items
MN-5 SUS, Taica
Soft Silicone Gel Mounts
Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene.
All SUS versions are stainless steel equivalents.
Features and Benefits
Fixable by two vertical slotted bolts
Strong Bond Between Metal Parts and Silicone
High Temperature Resistance -40 to 200°C
Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant
Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads
Application Information
Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.
Dimensions
Type
Height h (mm)
Top plate dia. (mm)
Bottom plate dia. (mm)
Stud length (mm)
Screw thread
A
13
12
18
15
M4
B
18
12
18
15
M4
C
18
20
25
20
M6
MN 3
22
24
24
18
M6
MN 5
22
24
24
18
M6
MN 7
22
24
24
18
M6
MN 10
22
24
24
18
M6
TW
25
28
35
17
M6
BG 7
23
28
28
12
M3
BG 8
23
28
28
12
M6
Comparison table
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. frequency (Hz)
A
2.0 to 3.2
16 to 15
12
23
B
1.6 to 2.4
13 to 11
13 to 12
18
C
3.2 to 8.0
14 to 12
13 to 12
20
MN 3
8 to 14
12 to 10
12
17
MN 5
14 to 22
11 to 10
14 to 13
16
MN 7
22 to 34
11 to 10
16 to 15
16
MN 10
34 to 50
11 to 10
20 to 18
16
TW
50 to 100
10 to 8
20 to 19
14
BG 7
3.2 to 6.4
10 to 8
16 to 14
14
BG 8
6 to 16
10 to 8
18 to 16
14
Note
A bag contains 1 item
Silicone Low Frequency Male/Male Mounts
New items
SF-50, Taica
Insulator SF-2 to SF-50 Series
SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt.
All SUS versions are stainless steel equivalents.
Features and Benefits
Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts
Also Absorbs Shock and Reduces Noise
Base Mounting with Top Stud Fixing
Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg
Strong Bond Between Metal Parts and Silicon
Excellent for Outdoor Use
SF-2, SF-5 and SF-10 have stainless steel bottom plate
SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions
Application Information
Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment.
SF-30 and SF-50
Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.
Height h (mm)
22
Top plate Dia. (mm)
30
Bottom plate W x L (mm)
36 x 60
Stud length (mm)
18
Stud thread
M6
Fixing centres (mm)
45
Fixing hole W x L (mm)
4.2 x 6
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
Stock no.
SF-2
5 to 13
15 to 10
12 to 13
From 22
474-868
SF-5
13 to 30
13 to 9
15 to 16
From 19
474-886
SF-10
30 to 50
12 to 9
19 to 21
From 17
474-880
SF-30
100 to 140
8 to 9
18 to 19
From 13
855-2219
SF-50
120 to 300
10 to 15
12 to 18
From 15
474-814
Note
A bag contains 1 item
Silicone Low Frequency Mounts
Warning
Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads.
New items
Lambda GEL COH-1002 400*400*t0.5, Taica
Lambda GEL COH-1002 Series
Lambda GEL COH-1002 series sheet type thermal conductive gel is a very soft, tacky gap filler that facilitates excellent heat dissipation whilst minimising heat resistance. The COH-1002 series is usable over wide temperature ranges, is flame retardant and electrically insulating. Suitable for wide area applications such as power modules.
New items
Lambda GEL COH-1002LVC 400*400*t2.0, Taica
Lambda GEL COH-1002LVC Series
Lambda GEL COH-1002LVC series sheet type thermal conductive gel is a very soft, tacky gap filler that facilitates excellent heat dissipation whilst minimising heat resistance. The COH-1002LVC series is usable over wide temperature ranges, is flame retardant and electrically insulating. Suitable for wide area applications such as power modules.
New items
GEL Bush S-6, Taica
Gel Bushes
Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C.
Features and Benefits
Through Bolts Type
Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B
Minimum Horizontal Deflection
Split Unit to Make Installation Easier and to Suit Varying Material Thickness
Excellent Weathering Properties, Ozone Resistant
No Loss of Performance After Repeated Compression
UV Resistant and Chemically Resistant and Out Door Use
Product Application Information
Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.
Dimensions
Type
Bore dia. (mm)
OD dia. (mm)
Flange height (mm)
Material hole dia. (mm)
Material thickness (mm)
Gel type
Usable bolts (smaller than)
S
4
11
3
7
3.5
7
M3
A-1
5
14
4
9
4
6/5
M3
A-2
5
14
4
9
4
6
M3
B-1
6
25
5
14
6.5
6
M4
B-2
6
25
5
14
6.5
8
M4
Comparison table
Type
Optimum Load (kg/4 legs)
Resonance point (Hz)
Resonance magnification (dB)
Recom. Frequency (Hz)
S
0.2 to 0.75
64 to 42
7 to 9
0.2kg from 90
0.75kg from 60
A-1
0.5 to 2.5
67 to 35
9 to 10
0.5kg from 95
2.5kg from 50
A-2
2.5 to 4.0
49 to 37
15 to 16
2.5kg from 70
4.0kg from 55
B-1
4 to 15
49 to 23
15 to 17
4kg from 70
15kg from 35
B-2
15 to 32
38 to 20
19 to 23
15kg from 40
32kg from 25
New items
GC-1, Taica
Gel Tape and Chips
Silicone Gel Tape and Chips that can provide shock and vibration protection as well as reducing noise
Simply cut to size, remove backing and attach where necessary
Adhesive on one side of the Tape or Chip
A selection (width/thickness) available to suit different applications
Ideal where space is restricted and mounts/bushes are not suitable
Low compression set
High temperature resistance -40 to 100°C
Excellent weathering properties, ozone resistant, UV resistant and chemically resistant and out door use
Ideal for light component isolation
Chips: 25 pieces per sheet, price is for one sheet
Gel Tape Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GT-1
1,000
10
1
474-763
GT-2
1,000
20
1
474-818
GT-3
1,000
10
2
474-808
GT-4
1,000
20
2
474-791
GT-5
1,000
10
3
474-858
GT-6
1,000
20
3
474-795
Gel Chip Dimensions
Type
Length (mm)
Width (mm)
Thickness (mm)
Stock no.
GC-1
10
10
3
474-852
GC-2
10
10
5
474-842
GC-3
15
15
3
474-846
GC-4
15
15
5
474-836
GC-5
15
15
10
474-830
GC-6
20
20
3
474-820
GC-7
20
20
5
474-824
GC-8
20
20
10
474-767
New items
NP GEL WHITE, Taica
Alpha GEL
A range of vibration isolating gel foam pads containing Alpha Gel®, a revolutionary gel that has outstanding shock absorbency, excellent workability and long-term stability and durability. The NP Gel has excellent temperature performance from -40°C up to 200°C, and low compression set compared to most foam materials.
Features and Benefits
Enhanced Shock Absorption
Resistance to Ozone
Wide Operating Temperature Range
Lightweight
Low Compression Set
Flame Retardant
Product Application Information
The Alpha Gel has amazing shock absorbing capabilities making it ideal for sports and industrial applications. Alpha Gels easy adjustability in shape makes vibration damping ideal for light loads and microvibration.
Applications include shoe cushioning, mattresses, pen grips, miniaturised products and noise suppression under precision instruments.
Note
Powder is applied to the surface.
Don’t hesitate to ask questions for better clarification.