Featured Products
Air Filter Unit and Hoses Designed to supply a single wearer, this unit filters out oil and water vapours, droplets, particulates and odours. It...
Tornado T-Two A lightweight hood manufactured from a durable PU coated nylon that covers the head and shoulders. No impact protection. Provides...
ProMask 2 Scott ProMask 2 is a twin filter full face mask respirator. Accepts filters from the Pro 2 range Grey silicone face piece Clear inn...
Protector Style 600 ABS Vented Safety Helmet The Protector Style 600 is a modern, stylish and visually appealing safety helmet. Widely accepted...
Protector 'Bumpmaster' Hygiene Cap Guards against cuts, abrasions and knocks without limiting vision. Offers ideal protection when working in a...
Protector Chinstrap and Sweatbands Safety helmet accessories including elasticated webbing chinstraps and leather or towelling replacement sweat...
Protector Style 600 ABS Vented Safety Helmet The Protector Style 600 is a modern, stylish and visually appe...
Pro2000 Filters Protect against gases, particles and combinations Standard 40mm thread Application ABEK2- organic, inorganic and acid gases...
Tornado T-Two Anti-Static A lightweight hood manufactured from durable, polyurethane-coated nylon with anti static properties and taped seams. C...
Safety Helmet Mounting Posts Highly durable mounting posts for safety helmets....
Protector Chinstrap and Sweatbands Safety helmet accessories including elasticated webbing chinstraps and leather or towelling replacement sweat...
Protector IB2000 Browguard Protects against impact, splash or heat hazards; shielding the front and top sections of the head as well as the eyes...
Popular Categories For Protector
Popular Items
Popular items
2009891, Protector
Air Filter Unit and Hoses
Designed to supply a single wearer, this unit filters out oil and water vapours, droplets, particulates and odours. It can deliver in excess of 300 l/min of filtered air at inlet pressures over 4 bar.
For use with Tornado airline system
Requires 4-8 bar inlet pressure
Inlet connection, 1/2 inch BSP female thread
Easy filter element replacement
Order hoses separately, available in 3m and 10m lengths with CEN couplings
Standards
EN1835
Popular items
1073117, Protector
Tornado T-Two
A lightweight hood manufactured from a durable PU coated nylon that covers the head and shoulders. No impact protection. Provides a cool flow of air over the head and down the face.
With the convenience of a simple neck tie, will fit all head sizes and is particularly suitable for wearers with beards and spectacles
Requires 1 particulate filter, 2 gas filters or 3 combination filters
Can be fitted to airline filter system
Pack of 10 tear-off visors available
Note
Headtop only; power unit, battery, airline system, filters supplied separately.
Standards
Powered prEN 12941//2 TH3, Airline prEN1835 LDH3
Popular items
6044081, Protector
ProMask
2
Scott ProMask
2
is a twin filter full face mask respirator.
Accepts filters from the Pro
2
range
Grey silicone face piece
Clear inner mask - ensures the wearer is easily identified
Clear field of vision and balance due to twin side-fit filters
Note
Filters not supplied, to be purchased separately. See stock numbers 277-875, 514-4969, 514-4975
Standards
CE marked and to EN136
Popular items
2007848, Protector
Protector Style 600 ABS Vented Safety Helmet
The Protector Style 600 is a modern, stylish and visually appealing safety helmet. Widely accepted in many segments of industry for exceptional comfort, balance and stability, the Style 600 offers many features that set it apart from other safety helmets designs.
CE Certified to EN397, +/- 30°C, LD, 440V a.c, VDE +1000V a.c
Robust ABS shell
8 Point Terylene head harness with comfortable terry towelling sweatband
Wide head size adjustment 50-66cm
Lightweight only 350g
Optional integrated eye shield (grade B impact)
Short peak design for good upward vision
Moulded top ventilation ports allow efficient airflow and reduce heat build up
30mm accessory post for integration of face and hearing protection
Contoured rain gutter design
Scalloped outer shell to allow efficient earmuff cushion seal
Standards
CE marked to EN397
Popular items
1050824, Protector
Protector 'Bumpmaster' Hygiene Cap
Guards against cuts, abrasions and knocks without limiting vision. Offers ideal protection when working in areas with little headroom, the robust hygiene cap is moulded from polyethylene and features a 4-point Terylene harness with integral sweatband for maximum comfort during prolonged wear.
Lightweight
Recommended for the food and drugs industries
Contoured profile enables behind-the-head earmuffs to be worn
Short peak for maximum upward visibility
Washable – very hygienic
Note
This cap is not suitable for protection against falling objects and is not equipped with side slots for helmet accessories.
Standards
CE marked to EN812
Popular items
1051610, Protector
Protector Chinstrap and Sweatbands
Safety helmet accessories including elasticated webbing chinstraps and leather or towelling replacement sweatbands.
For use with HDPE, ABS or Polycarbonate helmets
Popular items
2007846, Protector
Protector Style 600 ABS Vented Safety Helmet
The Protector Style 600 is a modern, stylish and visually appealing safety helmet. Widely accepted in many segments of industry for exceptional comfort, balance and stability, the Style 600 offers many features that set it apart from other safety helmets designs.
CE Certified to EN397, +/- 30°C, LD, 440V a.c, VDE +1000V a.c
Robust ABS shell
8 Point Terylene head harness with comfortable terry towelling sweatband
Wide head size adjustment 50-66cm
Lightweight only 350g
Optional integrated eye shield (grade B impact)
Short peak design for good upward vision
Moulded top ventilation ports allow efficient airflow and reduce heat build up
30mm accessory post for integration of face and hearing protection
Contoured rain gutter design
Scalloped outer shell to allow efficient earmuff cushion seal
Standards
CE marked to EN397
Popular items
2014874, Protector
Pro2000 Filters
Protect against gases, particles and combinations
Standard 40mm thread
Application
ABEK2- organic, inorganic and acid gases and vapours, ammonia and organic ammonia derivatives
P3- fine dusts up to 20 x OEL
B2P3- inorganic gases and vapours, solid and liquid toxic particles
A2P3- organic vapours up to 20 X OEL or up to 5000ppm and particulates of up to 10 x OEL
ABEK2P3- organic, inorganic and acid gases and vapours, ammonia and organic ammonia derivatives, solid and liquid toxic particles
Standards
CE marked and approved to EN14387
Popular items
2014168, Protector
Tornado T-Two Anti-Static
A lightweight hood manufactured from durable, polyurethane-coated nylon with anti static properties and taped seams. Covers the head and shoulders.,Does not provide impact protection.
Gives a cool flow of air over the head and down the face
Can be fitted to airline filter system
Will fit all head sizes and is particularly suitable for wearers with a beard and/or spectacles
Requires 1 particulate filter, 2 gas filters or 3 combination filters
Note
Headtop only. Power unit, battery, airline system and filters supplied separately.
Standards
Powered EN12941 TH3, Airline EN1835 LDH3
Popular items
1044267, Protector
Safety Helmet Mounting Posts
Highly durable mounting posts for safety helmets.
Can be used in conjunction Mark 10 earmuffs
Standards
Certified to EN166 1B39
Popular items
1051612, Protector
Protector Chinstrap and Sweatbands
Safety helmet accessories including elasticated webbing chinstraps and leather or towelling replacement sweatbands.
For use with HDPE, ABS or Polycarbonate helmets
Popular items
2021399, Protector
Protector IB2000 Browguard
Protects against impact, splash or heat hazards; shielding the front and top sections of the head as well as the eyes and face.
Terry Towelling sweatband
Adjusting ratchet headgear
Foam comfort pad to cradle the head without excessive pressure
Standards
CE marked to EN166 B39 and EN1731 SG. Polycarbonate Visors: EN166 1 B39 and Acetate Visors: EN166 2-1, 2 1 F3.
New Items
New items
2009891, Protector
Air Filter Unit and Hoses
Designed to supply a single wearer, this unit filters out oil and water vapours, droplets, particulates and odours. It can deliver in excess of 300 l/min of filtered air at inlet pressures over 4 bar.
For use with Tornado airline system
Requires 4-8 bar inlet pressure
Inlet connection, 1/2 inch BSP female thread
Easy filter element replacement
Order hoses separately, available in 3m and 10m lengths with CEN couplings
Standards
EN1835
New items
2007848, Protector
Protector Style 600 ABS Vented Safety Helmet
The Protector Style 600 is a modern, stylish and visually appealing safety helmet. Widely accepted in many segments of industry for exceptional comfort, balance and stability, the Style 600 offers many features that set it apart from other safety helmets designs.
CE Certified to EN397, +/- 30°C, LD, 440V a.c, VDE +1000V a.c
Robust ABS shell
8 Point Terylene head harness with comfortable terry towelling sweatband
Wide head size adjustment 50-66cm
Lightweight only 350g
Optional integrated eye shield (grade B impact)
Short peak design for good upward vision
Moulded top ventilation ports allow efficient airflow and reduce heat build up
30mm accessory post for integration of face and hearing protection
Contoured rain gutter design
Scalloped outer shell to allow efficient earmuff cushion seal
Standards
CE marked to EN397
New items
1073117, Protector
Tornado T-Two
A lightweight hood manufactured from a durable PU coated nylon that covers the head and shoulders. No impact protection. Provides a cool flow of air over the head and down the face.
With the convenience of a simple neck tie, will fit all head sizes and is particularly suitable for wearers with beards and spectacles
Requires 1 particulate filter, 2 gas filters or 3 combination filters
Can be fitted to airline filter system
Pack of 10 tear-off visors available
Note
Headtop only; power unit, battery, airline system, filters supplied separately.
Standards
Powered prEN 12941//2 TH3, Airline prEN1835 LDH3
New items
6044081, Protector
ProMask
2
Scott ProMask
2
is a twin filter full face mask respirator.
Accepts filters from the Pro
2
range
Grey silicone face piece
Clear inner mask - ensures the wearer is easily identified
Clear field of vision and balance due to twin side-fit filters
Note
Filters not supplied, to be purchased separately. See stock numbers 277-875, 514-4969, 514-4975
Standards
CE marked and to EN136
New items
1050824, Protector
Protector 'Bumpmaster' Hygiene Cap
Guards against cuts, abrasions and knocks without limiting vision. Offers ideal protection when working in areas with little headroom, the robust hygiene cap is moulded from polyethylene and features a 4-point Terylene harness with integral sweatband for maximum comfort during prolonged wear.
Lightweight
Recommended for the food and drugs industries
Contoured profile enables behind-the-head earmuffs to be worn
Short peak for maximum upward visibility
Washable – very hygienic
Note
This cap is not suitable for protection against falling objects and is not equipped with side slots for helmet accessories.
Standards
CE marked to EN812
New items
1051610, Protector
Protector Chinstrap and Sweatbands
Safety helmet accessories including elasticated webbing chinstraps and leather or towelling replacement sweatbands.
For use with HDPE, ABS or Polycarbonate helmets
New items
2014168, Protector
Tornado T-Two Anti-Static
A lightweight hood manufactured from durable, polyurethane-coated nylon with anti static properties and taped seams. Covers the head and shoulders.,Does not provide impact protection.
Gives a cool flow of air over the head and down the face
Can be fitted to airline filter system
Will fit all head sizes and is particularly suitable for wearers with a beard and/or spectacles
Requires 1 particulate filter, 2 gas filters or 3 combination filters
Note
Headtop only. Power unit, battery, airline system and filters supplied separately.
Standards
Powered EN12941 TH3, Airline EN1835 LDH3
New items
2007846, Protector
Protector Style 600 ABS Vented Safety Helmet
The Protector Style 600 is a modern, stylish and visually appealing safety helmet. Widely accepted in many segments of industry for exceptional comfort, balance and stability, the Style 600 offers many features that set it apart from other safety helmets designs.
CE Certified to EN397, +/- 30°C, LD, 440V a.c, VDE +1000V a.c
Robust ABS shell
8 Point Terylene head harness with comfortable terry towelling sweatband
Wide head size adjustment 50-66cm
Lightweight only 350g
Optional integrated eye shield (grade B impact)
Short peak design for good upward vision
Moulded top ventilation ports allow efficient airflow and reduce heat build up
30mm accessory post for integration of face and hearing protection
Contoured rain gutter design
Scalloped outer shell to allow efficient earmuff cushion seal
Standards
CE marked to EN397
New items
2014874, Protector
Pro2000 Filters
Protect against gases, particles and combinations
Standard 40mm thread
Application
ABEK2- organic, inorganic and acid gases and vapours, ammonia and organic ammonia derivatives
P3- fine dusts up to 20 x OEL
B2P3- inorganic gases and vapours, solid and liquid toxic particles
A2P3- organic vapours up to 20 X OEL or up to 5000ppm and particulates of up to 10 x OEL
ABEK2P3- organic, inorganic and acid gases and vapours, ammonia and organic ammonia derivatives, solid and liquid toxic particles
Standards
CE marked and approved to EN14387
New items
1044267, Protector
Safety Helmet Mounting Posts
Highly durable mounting posts for safety helmets.
Can be used in conjunction Mark 10 earmuffs
Standards
Certified to EN166 1B39
New items
1073115, Protector
Positive Pressure Power System
A power unit designed to provide filtered air for the complete range of Tornado head tops. An intelligent electronic management system ensures battery and filter life are maximised. With 15 power levels, the unit monitors airflow and optimises flow rates. As the filters begin to clog the unit automatically increases power to compensate. Should the battery level become low or the filters clog, an audible and visual warning is given.
Lightweight, worn on a waist belt
Can take up to 3 filters depending on requirements
Battery lock to prevent accidental filter disconnection
Unit is designed to require no routine maintenance and is tamper resistant
Minimum filter requirements: 1 x P3; 2 x A / ABE (But 3 for T&, T8 headtops); 3 x AP / ABEP
Selection Guide
RS Stock No.
Type
Applications
No. of filters
to be fitted
506-3725
P3
Solid and liquid particulates
(dusts, fibres, mists, fumes, bacteria and virus)
1
506-3731
A2
Organic gases and vapours with a boiling point above 65°C
2; 3 (T7,T8)
506-3747
506-3769
A1B1E1
As A2 + inorganic and acid gases and vapours,
e.g. chlorine, hydrogen sulphide, hydrogen cyanide,
sulphur dioxide, hydrogen chloride
2; 3 (T7,T8)
506-3753
A2P3
As A2 + solid and liquid particulates
(dusts, fibres, mists, fumes, bacteria and virus)
3
Note
Filter adapter
217-1845
required to fit 2 / 3 filters to the power unit.
Standards
EN 12941//2
New items
1051612, Protector
Protector Chinstrap and Sweatbands
Safety helmet accessories including elasticated webbing chinstraps and leather or towelling replacement sweatbands.
For use with HDPE, ABS or Polycarbonate helmets
Don’t hesitate to ask questions for better clarification.