Featured Products
The makeON Space Hook & Loop is soft clasping silverized nylon conductive Velcro for wearables and soft circuit switch projects- low current DC a...
The makeON 4 Pad female Launchpad integrate it into their project without headers. The 4 position through hole PCB 2.54mm, open (no headers). It...
The makeON Light x Movement Inventure kit for creating a light project controlled by movement. Create a wearable that flashes when you dance, a b...
The makeON Expedition in venture kit with instructions for making interactive electronic in ventures and lessons with light, sound and movement....
The makeON Male Connector breakout grove components and make them accessible to wide variety of conductive circuitry materials in the global elec...
The makeON 8 Pad female Launchpad integrate it into their project without headers. The 8 position through hole PCB 2.54mm, open (no headers). It...
The makeON Launchpad breaks out majority of the pins on-board the CLUE and Micro: bit. Connect components by clip, clamp, tape, paint, rivet, sol...
The makeON 2 Pad female Launchpad breaks out two pins from a component that is basic LED or microcontrollers. The female SMD makes circuit compon...
The makeON JST-PH Male Launchpad has 2 position breakout board with a socket (female) soldered header to 2.54mm. The reusable 2 Pad Launchpad bre...
The makeON Power pad has coin cell battery holder breakout board with slide switch. It create prototypes with ease. The low profile SMD design fo...
The makeON Space Tape is conductive woven nylon fabric tape for low current DC applications. It is ideal for wearable electronics, pliable switch...
The makeON 3 Pad female Launchpad breaks out two pins from a component I.E basic LED or microcontrollers. It has 3 position breakout board with a...
Popular Categories For makeON
Popular Items
Popular items
SPC_HKLP_008_v100, makeON
The makeON Space Hook & Loop is soft clasping silverized nylon conductive Velcro for wearables and soft circuit switch projects- low current DC applications. It is ideal for wearable electronics, pliable switches and other prototyping.
Low corrosion
Highly conductive
Lower resistance than copper
Silvered nylon fabric makes projects flexible and durable for wearables
Readily allows electric current
Build capacitive touch sensor
Space materials and other conductive items like thread, paint, clips and wires
Popular items
LPD_4_BLKNUZZZv100, makeON
The makeON 4 Pad female Launchpad integrate it into their project without headers. The 4 position through hole PCB 2.54mm, open (no headers). It attach to their component, microcontroller or other connections directly with or without their own headers.
Open through-hole design for easy soldering, sewing, or hard connection
Extra mounting points for versatile installation
Works great with Neopixels, hard soldering Grove cables for wearables, and other digital or analogue sensors with 4 pin outs
Accommodates low profile, flexible circuitry for tight spaces, wearables
Popular items
KIT___REDSOLXMv100, makeON
The makeON Light x Movement Inventure kit for creating a light project controlled by movement. Create a wearable that flashes when you dance, a bike with turn signals. The toolkit can be used individually or in groups as a communication tool for sustainability, entrepreneurship, and empirical, humanistic approaches toward product design and system engineering.
Facilitates projects for educational and recreational activities in STEAM through design, prototyping, system thinking with 21st skill building
For young people and adults a like, this kit offer topics of STEAM (science, technology, engineering, art, Mathematics) in a creative, culturally relevant, cutting edge format
Popular items
KIT___WHISOEXPv100, makeON
The makeON Expedition in venture kit with instructions for making interactive electronic in ventures and lessons with light, sound and movement. It follow along and make circuit projects while learning design thinking, logic and reasoning, symbols, system thinking and electronics fundamentals. It make low power electronic circuits on almost anything, nearly anywhere, flexibly and fast in wearables, walls, and objects with or without a microcontroller.
Facilitates projects for educational and recreational activities in STEAM through design, prototyping, system thinking with 21st skill building
For young people and adults a like, this kit offer topics of STEAM (science, technology, engineering, art, Mathematics) in a creative, culturally relevant, cutting edge format
The toolkit can be used individually or in groups as a communication tool for sustainability, entrepreneurship, and empirical, humanistic approaches toward product design and system engineering
Popular items
LPD_4_BLKGSZZZv200, makeON
The makeON Male Connector breakout grove components and make them accessible to wide variety of conductive circuitry materials in the global electronic ecosystem.
Extra through-holes on the PCB for various types of mounting technique
Accommodates low profile, flexible circuitry for tight spaces, wearables
Extend the contact point for all types of conductive materials and cables to maximize accessibility
Popular items
LPD_8_BLKNUZZZv100, makeON
The makeON 8 Pad female Launchpad integrate it into their project without headers. The 8 position through hole PCB 2.54mm, open (no headers). It has extra through-holes on the PCB for various types of mounting techniques for example, screws, thread, hot glue, etc.
Extend the contact point for all types of conductive materials and cables to maximize accessibility
Re-usable, solder-free connections to components like resistors, capacitors, diodes
Accommodates low profile, flexible circuitry for tight spaces, wearables
Popular items
X1_NXS_BLKv200, makeON
The makeON Launchpad breaks out majority of the pins on-board the CLUE and Micro: bit. Connect components by clip, clamp, tape, paint, rivet, solder, sew and snaps. The size of the pads allow clear connections to be made less fiddly. The card reader mounting is soldered on both sides making it durable and low profile at the same time. It is an excellent choice for low profile requirements, such as in tight places, like wearables, walls and more.
Multiple access points to V+ GND
It to be mounted on the wall or in wearables to show the micro: bit on full display
Low profile
SMD design
Popular items
LPD_2_WHTFSZZZv200, makeON
The makeON 2 Pad female Launchpad breaks out two pins from a component that is basic LED or microcontrollers. The female SMD makes circuit components accessible to a wide array of connections and conductive materials. It extend the contact point for all types of conductive materials and cables to maximize accessibility.
High quality connector
Low profile, SMD design
Extra through-holes on the PCB for various types of mounting techniques, for example, screws, thread, hot glue, etc.
Popular items
LPD_2_WHTJSZZZv200, makeON
The makeON JST-PH Male Launchpad has 2 position breakout board with a socket (female) soldered header to 2.54mm. The reusable 2 Pad Launchpad breaks out two pins from a component that is basic LED or microcontrollers. The female SMD makes circuit components accessible to a wide array of connections and conductive materials.
High quality connector
Low profile, SMD design
Extra through-holes on the PCB for various types of mounting techniques
Extend the contact point for all types of conductive materials and cables to maximize accessibility
Popular items
LPD_WHTPSZZZv200, makeON
The makeON Power pad has coin cell battery holder breakout board with slide switch. It create prototypes with ease. The low profile SMD design for wearables.
On/Off switch
Slide-in battery holder
High quality connector
Low profile, SMD design
Popular items
SPC_TAPE__10Mv100, makeON
The makeON Space Tape is conductive woven nylon fabric tape for low current DC applications. It is ideal for wearable electronics, pliable switches and other prototyping.
Readily allows electric current release paper backed conductive adhesive
Low corrosion
Easy to cut with little to no fray with no adhesive backing
Highly conductive, lower resistance than copper
Silvered nylon fabric makes projects
Popular items
LPD_3_WHTFSZZZv200, makeON
The makeON 3 Pad female Launchpad breaks out two pins from a component I.E basic LED or microcontrollers. It has 3 position breakout board with a socket (female) soldered header 2.54mm. The female SMD makes circuit components accessible to a wide array of connections and conductive materials.
High quality connector
Low profile, SMD design
Extra through-holes on the PCB for various types of mounting techniques, for example, screws, thread, hot glue, etc.
New Items
New items
SPC_HKLP_008_v100, makeON
The makeON Space Hook & Loop is soft clasping silverized nylon conductive Velcro for wearables and soft circuit switch projects- low current DC applications. It is ideal for wearable electronics, pliable switches and other prototyping.
Low corrosion
Highly conductive
Lower resistance than copper
Silvered nylon fabric makes projects flexible and durable for wearables
Readily allows electric current
Build capacitive touch sensor
Space materials and other conductive items like thread, paint, clips and wires
New items
LPD_4_BLKNUZZZv100, makeON
The makeON 4 Pad female Launchpad integrate it into their project without headers. The 4 position through hole PCB 2.54mm, open (no headers). It attach to their component, microcontroller or other connections directly with or without their own headers.
Open through-hole design for easy soldering, sewing, or hard connection
Extra mounting points for versatile installation
Works great with Neopixels, hard soldering Grove cables for wearables, and other digital or analogue sensors with 4 pin outs
Accommodates low profile, flexible circuitry for tight spaces, wearables
New items
KIT___REDSOLXMv100, makeON
The makeON Light x Movement Inventure kit for creating a light project controlled by movement. Create a wearable that flashes when you dance, a bike with turn signals. The toolkit can be used individually or in groups as a communication tool for sustainability, entrepreneurship, and empirical, humanistic approaches toward product design and system engineering.
Facilitates projects for educational and recreational activities in STEAM through design, prototyping, system thinking with 21st skill building
For young people and adults a like, this kit offer topics of STEAM (science, technology, engineering, art, Mathematics) in a creative, culturally relevant, cutting edge format
New items
KIT___WHISOEXPv100, makeON
The makeON Expedition in venture kit with instructions for making interactive electronic in ventures and lessons with light, sound and movement. It follow along and make circuit projects while learning design thinking, logic and reasoning, symbols, system thinking and electronics fundamentals. It make low power electronic circuits on almost anything, nearly anywhere, flexibly and fast in wearables, walls, and objects with or without a microcontroller.
Facilitates projects for educational and recreational activities in STEAM through design, prototyping, system thinking with 21st skill building
For young people and adults a like, this kit offer topics of STEAM (science, technology, engineering, art, Mathematics) in a creative, culturally relevant, cutting edge format
The toolkit can be used individually or in groups as a communication tool for sustainability, entrepreneurship, and empirical, humanistic approaches toward product design and system engineering
New items
LPD_4_BLKGSZZZv200, makeON
The makeON Male Connector breakout grove components and make them accessible to wide variety of conductive circuitry materials in the global electronic ecosystem.
Extra through-holes on the PCB for various types of mounting technique
Accommodates low profile, flexible circuitry for tight spaces, wearables
Extend the contact point for all types of conductive materials and cables to maximize accessibility
New items
LPD_8_BLKNUZZZv100, makeON
The makeON 8 Pad female Launchpad integrate it into their project without headers. The 8 position through hole PCB 2.54mm, open (no headers). It has extra through-holes on the PCB for various types of mounting techniques for example, screws, thread, hot glue, etc.
Extend the contact point for all types of conductive materials and cables to maximize accessibility
Re-usable, solder-free connections to components like resistors, capacitors, diodes
Accommodates low profile, flexible circuitry for tight spaces, wearables
New items
X1_NXS_BLKv200, makeON
The makeON Launchpad breaks out majority of the pins on-board the CLUE and Micro: bit. Connect components by clip, clamp, tape, paint, rivet, solder, sew and snaps. The size of the pads allow clear connections to be made less fiddly. The card reader mounting is soldered on both sides making it durable and low profile at the same time. It is an excellent choice for low profile requirements, such as in tight places, like wearables, walls and more.
Multiple access points to V+ GND
It to be mounted on the wall or in wearables to show the micro: bit on full display
Low profile
SMD design
New items
LPD_2_WHTFSZZZv200, makeON
The makeON 2 Pad female Launchpad breaks out two pins from a component that is basic LED or microcontrollers. The female SMD makes circuit components accessible to a wide array of connections and conductive materials. It extend the contact point for all types of conductive materials and cables to maximize accessibility.
High quality connector
Low profile, SMD design
Extra through-holes on the PCB for various types of mounting techniques, for example, screws, thread, hot glue, etc.
New items
LPD_2_WHTJSZZZv200, makeON
The makeON JST-PH Male Launchpad has 2 position breakout board with a socket (female) soldered header to 2.54mm. The reusable 2 Pad Launchpad breaks out two pins from a component that is basic LED or microcontrollers. The female SMD makes circuit components accessible to a wide array of connections and conductive materials.
High quality connector
Low profile, SMD design
Extra through-holes on the PCB for various types of mounting techniques
Extend the contact point for all types of conductive materials and cables to maximize accessibility
New items
LPD_WHTPSZZZv200, makeON
The makeON Power pad has coin cell battery holder breakout board with slide switch. It create prototypes with ease. The low profile SMD design for wearables.
On/Off switch
Slide-in battery holder
High quality connector
Low profile, SMD design
New items
SPC_TAPE__10Mv100, makeON
The makeON Space Tape is conductive woven nylon fabric tape for low current DC applications. It is ideal for wearable electronics, pliable switches and other prototyping.
Readily allows electric current release paper backed conductive adhesive
Low corrosion
Easy to cut with little to no fray with no adhesive backing
Highly conductive, lower resistance than copper
Silvered nylon fabric makes projects
New items
LPD_3_WHTFSZZZv200, makeON
The makeON 3 Pad female Launchpad breaks out two pins from a component I.E basic LED or microcontrollers. It has 3 position breakout board with a socket (female) soldered header 2.54mm. The female SMD makes circuit components accessible to a wide array of connections and conductive materials.
High quality connector
Low profile, SMD design
Extra through-holes on the PCB for various types of mounting techniques, for example, screws, thread, hot glue, etc.
Don’t hesitate to ask questions for better clarification.