Featured Products
MADE TESTECRAN+ Insulation Tester TESTECRAN+™ is used to check the outer sheath of an underground medium or low vol...
MADE NADIR LV Cable Tracer NADIR enables the identification of a live low voltage cable and the ID of each phase un...
MADE JUPITER+ MV/LV Cable Tracer JUPITER+ is a system for identifying cables in a trench, gutter or cable shelf. Ea...
Popular Categories For MADE
Categories For MADE
Popular Items
Popular items
Popular items
TESTECRAN+, MADE
MADE TESTECRAN+ Insulation Tester
TESTECRAN+™ is used to check the outer sheath of an underground medium or low voltage cable By measuring the insulation resistance between the screen and earth. If a faulty condition is found, corrective measures must be taken to ensure ongoing good cable function. It is a hand held device supplied in a carrying case with its earth peg and connecting cables.
Power: 4 x batteries 1.5 V
Dimensions: 150 x 80 x30 mm
Weight: 0.6 Kg
MADE Insulation Testers
Popular items
Popular items
NADIR, MADE
MADE NADIR LV Cable Tracer
NADIR enables the identification of a live low voltage cable and the ID of each phase under load in a trench and at the substation exit.
Nadir consists of a transmitter and a receiver and is used on a low voltage powered network with or without loads. The transmitter is connected between phases (preferred connection) or between phase and neutral downstream of the measuring point on a low voltage network. Using the receiver, the cable between the transmitter and the medium / low voltage distribution substation can be identified. As can the connection of the feeder in the substation. NADIR also enables identification of the three conductors in the low voltage feeder.
Popular items
JUPITER+, MADE
MADE JUPITER+ MV/LV Cable Tracer
JUPITER+ is a system for identifying cables in a trench, gutter or cable shelf. Each of the functions is carried out on unpowered MV & LV cables (customer loads online). The signals and the physical principles used are common for each function.
JUPITER+ consists of a transmitter and a receiver, both can be used offline and grounded on electronic networks.
The receiver allows cable pre-identifying, continuity checking and phase identifying in open circuit or short circuit modes.
Simplified ergonomics: continuity and phases identifying in open circuit mode are realised in a single handling
Single sensor for pre-identifying whatever the cable type
Enhanced performances on impregnated paper cables identifying
Storage of accessories and suitcase volume improved
Transmitter battery can be charged when suitcase is closed
Embedded self-diagnosis functions
New Items
New items
New items
TESTECRAN+, MADE
MADE TESTECRAN+ Insulation Tester
TESTECRAN+™ is used to check the outer sheath of an underground medium or low voltage cable By measuring the insulation resistance between the screen and earth. If a faulty condition is found, corrective measures must be taken to ensure ongoing good cable function. It is a hand held device supplied in a carrying case with its earth peg and connecting cables.
Power: 4 x batteries 1.5 V
Dimensions: 150 x 80 x30 mm
Weight: 0.6 Kg
MADE Insulation Testers
New items
New items
NADIR, MADE
MADE NADIR LV Cable Tracer
NADIR enables the identification of a live low voltage cable and the ID of each phase under load in a trench and at the substation exit.
Nadir consists of a transmitter and a receiver and is used on a low voltage powered network with or without loads. The transmitter is connected between phases (preferred connection) or between phase and neutral downstream of the measuring point on a low voltage network. Using the receiver, the cable between the transmitter and the medium / low voltage distribution substation can be identified. As can the connection of the feeder in the substation. NADIR also enables identification of the three conductors in the low voltage feeder.
New items
JUPITER+, MADE
MADE JUPITER+ MV/LV Cable Tracer
JUPITER+ is a system for identifying cables in a trench, gutter or cable shelf. Each of the functions is carried out on unpowered MV & LV cables (customer loads online). The signals and the physical principles used are common for each function.
JUPITER+ consists of a transmitter and a receiver, both can be used offline and grounded on electronic networks.
The receiver allows cable pre-identifying, continuity checking and phase identifying in open circuit or short circuit modes.
Simplified ergonomics: continuity and phases identifying in open circuit mode are realised in a single handling
Single sensor for pre-identifying whatever the cable type
Enhanced performances on impregnated paper cables identifying
Storage of accessories and suitcase volume improved
Transmitter battery can be charged when suitcase is closed
Embedded self-diagnosis functions
Don’t hesitate to ask questions for better clarification.