Featured Products
The Prong soil moisture sensor for BBC micro:bit is a sensor board that can be directly mounted to a BBC micro:bit to monitor the moisture presen...
The Kitronik Lesson in a Box The Environment pack for micro: bit is a complete set of parts & teaching resources to enable successful cross-curri...
The Kitronik digital servo has a metal gear. It also has 180 degree limit angle. It has ABS case Horn is made up of plastic
The Kitronik environmental control board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides t...
This Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder. This pro...
The Kitronik Solar Cell kit for the environmental control board comes supplied with its own on-board battery holder and also a terminal block for...
Pack of ten wires in a selection of five colours each with insulated crocodile clips on both ends. Lead length 0.5m Max current 0.5 Amp
Add motor driving capability to the micro:bit with the Kitronik compact motor driver board for the BBC micro:bit. This motor driver board allows...
Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakou...
This is a 4 pack of wires that are pre-terminated with an alligator (crocodile) clip on one end and a hookup pigtail (male jumper connector) on t...
This kit is a great way to get started with creating BBC micro:bit controlled E-Textiles projects and designs. We have selected a number of produ...
The LAMP:bit features connections which allow the micro:bit to be bolted/clipped directly to it. It has been designed to replicate a streetlight,...
Popular Categories For Kitronik
Categories For Kitronik
Popular Items
Popular items
25105, Kitronik
The Kitronik digital servo has a metal gear. It also has 180 degree limit angle.
It has ABS case
Horn is made up of plastic
Popular items
5697, Kitronik
The Kitronik environmental control board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides the ability to control outputs for devices such as a water pump, fan, servo or heater pad. This makes it ideal for feedback control systems.
Build automated systems that react to environmental changes, such as plant watering and greenhouse systems
There is also a solar-cell input that can be used in conjunction with rechargeable batteries
Board features a number of sensor inputs that can be coded to control the board's outputs
Popular items
56106, Kitronik
The Kitronik Lesson in a Box The Environment pack for micro: bit is a complete set of parts & teaching resources to enable successful cross-curricular lessons at KS3/4 (US equivalent - Grades 6-8/9-10). Lessons come with a detailed lesson plan, cross-referenced to: class slides, workbooks/worksheets, checklists etc., technicians notes and where appropriate, AFL guidance with answers and plenaries. The Lesson in a Box - The Environment spans Computing, Design & Technology, Biology/Combined Science, and all also contains enrichment day activities.
Computing - Your Smart Greenhouse lessons are all about designing software for the greenhouse.
Design and Technology - Your Smart Greenhouse lessons are all about designing for specific environments.
Biology/Combined Science - Your Smart Greenhouse lessons are all about factors affecting photosynthesis.
The Lesson in a Box (The Environment) is a complete set of electronics and teaching resources to enable successful cross-curricular lessons with minimal teacher effort
The 21 included lessons span D&T, Computing, and Biology/Combined Science
No soldering is required for technicians or students
The kit and teaching resources have been tried and tested by real pupils and developed by real teachers to save you time
In developing this box we wanted it to be affordable, useful and robust enough for teachers to use again and again
The resources cover not only the KS3/KS4 (US equivalent - Grades 6-8/9-10) specifications but also personal development by encouraging pupils to view traditional STEM activities as having value across their curriculum
The subject packs come with a detailed lesson plan, cross-referenced to: class slides, workbooks/ worksheets, checklists etc., technicians notes and where appropriate, AFL guidance with answers and plenaries
In developing this box we wanted it to be affordable, useful and robust enough for teachers to use again and again. The resources cover not only the KS3/KS4 (US equivalent - Grades ...
Popular items
5647, Kitronik
The Prong soil moisture sensor for BBC micro:bit is a sensor board that can be directly mounted to a BBC micro:bit to monitor the moisture present in soil. The two conductive tines are placed into the soil. Any water or moisture in the soil will conduct to give an analogue voltage that can be read by the BBC micro:bit.
The Prong is powered from the 3V supply of the BBC micro:bit. Use either the USB or JST connector on the BBC micro:bit to power the circuit. The Prong and the BBC micro:bit can also be powered from the Mi:Power board to create a compact standalone unit.
The board has been designed so that the BBC micro:bit can be bolted on using 3 x M3 nuts and 3 x M3 screws. Place the screws through the P1, 3V and GND holes of the PCB and BBC micro:bit, then use the M3 nuts to fasten together on the back of BBC micro:bit. Alternatively croc-clips can be used to connect between the Prong and the BBC micro:bit.
The micro:bit is not included
Popular items
5698, Kitronik
Add motor driving capability to the micro:bit with the Kitronik compact motor driver board for the BBC micro:bit. This motor driver board allows two motors to be driven simultaneously with forward, reverse & stop control, making it ideal for designs such as buggies. The board has built-in short circuit, over current and thermal protection.
The board includes an integrated Edge Connector for your BBC micro:bit to easily slot into. It also features external connections to the button A and button B inputs. This allows additional switches/inputs to be connected to the motor driver board and the state of these can then be read by the BBC micro:bit.
There are 2 additional inputs/outputs. These can be used for connecting a range of parts and can be used in either digital or analogue modes.
Popular items
5607, Kitronik
This kit is a great way to get started with creating BBC micro:bit controlled E-Textiles projects and designs.
We have selected a number of products from our Electro-Fashion range, including five regular 5mm LEDs, ten of our ultra-slim LEDs, ten crocodile clips and 6 meters of conductive thread. There are enough components for you get started immediately to create our Emoji Bag and Rocket Pencil Case projects with enough extra LEDs and Crocodile clips to also create something of your own design.
Popular items
5601B, Kitronik
Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the BBC micro:bit.
This Edge Connector Breakout Board for the BBC micro:bit gives access to all of the important pins on the bottom edge of the BBC micro:bit. 21 pins are broken out in total
providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.
Popular items
2407, Kitronik
Pack of ten wires in a selection of five colours each with insulated crocodile clips on both ends.
Lead length 0.5m
Max current 0.5 Amp
Popular items
2480, Kitronik
This is a 4 pack of wires that are pre-terminated with an alligator (crocodile) clip on one end and a hookup pigtail (male jumper connector) on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a male jumper connector to.
Each Alligator Clip with Pigtail cable has a wire length of 30cm and a male pin that easily inserts into a standard 0.1" connector. Each pack consists of two red cables and two black cables.
Popular items
56113, Kitronik
The Kitronik Solar Cell kit for the environmental control board comes supplied with its own on-board battery holder and also a terminal block for attaching solar cells. This add on pack provides everything you need to take advantage of these features, enabling you to make use of sunlight as a power source. Firstly, insert the batteries and then attach the solar cell to the terminal block with a small screwdriver. No soldering required. This solar cell kit has been put together to provide a renewable power source for the environmental control board. The kit comprises 3 x AA Ni-MH 1300mAh Rechargeable Batteries and a 5.0V 130mA polycrystalline solar cell.
This kit provides a renewable power source for the kitronik environmental control board
No soldering required
Solar cell features maximum current 130mA and maximum power 0.65V
The batteries are rechargeable making them a cost-effective and greener way of powering your projects
They have a capacity of 1300mAh and a nominal output of 1.2V
Popular items
5609, Kitronik
This Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder.
This prototyping system uses our specially designed Edge Connector Breakout Board for BBC micro:bit that gives full access to the pins on the bottom of the BBC micro:bit. The BBC micro:bit pins are broken out to a row of pin headers, the SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.
This prototyping system is used in conjunction with a Small Prototype Breadboard. This makes it easy to connect additional components using the included jumper wires. No soldering required.
Please Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included.
Popular items
5667, Kitronik
The Kitronik Lesson in a Box Visual Computing pack for micro: bit, available separately here, is a complete set of parts & teaching resources to enable successful cross-curricular lessons at KS3/4 (US equivalent - Grades 6-8/9-10). The subject packs come with a detailed lesson plan, cross-referenced to: class slides, workbooks/worksheets, checklists etc., technicians notes and where appropriate, AFL guidance with answers and plenaries.
D and T - Your visual coding lessons are all about the design of lighting within cultures.
Computing - Your visual coding lessons are all about seeing loops, learning about selection and conditions.
Physics/Combined Science - Your visual coding lessons are all about seeing data.
Geography - Your visual coding lessons are all about seeing earthquake data.
The Lesson in a Box (Visual Computing) is a complete set of electronics and teaching resources to enable successful cross-curricular lessons with minimal teacher effort
No soldering is required for technicians or students
The kit and teaching resources have been tried and tested by real pupils and developed by real teachers to save you time
In developing this box we wanted it to be affordable, useful and robust enough for teachers to use again and again
These subject packs are a basic introduction to cross-curricular visual computing
The resources cover not only the KS3/KS4 (US equivalent - Grades 6-8/9-10) specifications but also personal development by encouraging pupils to view traditional STEM activities as having value across their curriculum
Enrichments - Both enrichments are challenges designed for experimentation, one is a dance and light challenge and the other is a kaleidoscope build challenge. They can also be used for Open Day activities/displays. The activities in The Lesson in a Box Visual Computing pack utilise the BBC microbit, the Kitronik ZIP Halo HD for micro: bit and a clippable motor driver board designed specifically for these types of activities. The advant...
New Items
New items
5647, Kitronik
The Prong soil moisture sensor for BBC micro:bit is a sensor board that can be directly mounted to a BBC micro:bit to monitor the moisture present in soil. The two conductive tines are placed into the soil. Any water or moisture in the soil will conduct to give an analogue voltage that can be read by the BBC micro:bit.
The Prong is powered from the 3V supply of the BBC micro:bit. Use either the USB or JST connector on the BBC micro:bit to power the circuit. The Prong and the BBC micro:bit can also be powered from the Mi:Power board to create a compact standalone unit.
The board has been designed so that the BBC micro:bit can be bolted on using 3 x M3 nuts and 3 x M3 screws. Place the screws through the P1, 3V and GND holes of the PCB and BBC micro:bit, then use the M3 nuts to fasten together on the back of BBC micro:bit. Alternatively croc-clips can be used to connect between the Prong and the BBC micro:bit.
The micro:bit is not included
New items
56106, Kitronik
The Kitronik Lesson in a Box The Environment pack for micro: bit is a complete set of parts & teaching resources to enable successful cross-curricular lessons at KS3/4 (US equivalent - Grades 6-8/9-10). Lessons come with a detailed lesson plan, cross-referenced to: class slides, workbooks/worksheets, checklists etc., technicians notes and where appropriate, AFL guidance with answers and plenaries. The Lesson in a Box - The Environment spans Computing, Design & Technology, Biology/Combined Science, and all also contains enrichment day activities.
Computing - Your Smart Greenhouse lessons are all about designing software for the greenhouse.
Design and Technology - Your Smart Greenhouse lessons are all about designing for specific environments.
Biology/Combined Science - Your Smart Greenhouse lessons are all about factors affecting photosynthesis.
The Lesson in a Box (The Environment) is a complete set of electronics and teaching resources to enable successful cross-curricular lessons with minimal teacher effort
The 21 included lessons span D&T, Computing, and Biology/Combined Science
No soldering is required for technicians or students
The kit and teaching resources have been tried and tested by real pupils and developed by real teachers to save you time
In developing this box we wanted it to be affordable, useful and robust enough for teachers to use again and again
The resources cover not only the KS3/KS4 (US equivalent - Grades 6-8/9-10) specifications but also personal development by encouraging pupils to view traditional STEM activities as having value across their curriculum
The subject packs come with a detailed lesson plan, cross-referenced to: class slides, workbooks/ worksheets, checklists etc., technicians notes and where appropriate, AFL guidance with answers and plenaries
In developing this box we wanted it to be affordable, useful and robust enough for teachers to use again and again. The resources cover not only the KS3/KS4 (US equivalent - Grades ...
New items
25105, Kitronik
The Kitronik digital servo has a metal gear. It also has 180 degree limit angle.
It has ABS case
Horn is made up of plastic
New items
5697, Kitronik
The Kitronik environmental control board provides a variety of sensor inputs and connection points for the BBC micro:bit (V1 & V2) and provides the ability to control outputs for devices such as a water pump, fan, servo or heater pad. This makes it ideal for feedback control systems.
Build automated systems that react to environmental changes, such as plant watering and greenhouse systems
There is also a solar-cell input that can be used in conjunction with rechargeable batteries
Board features a number of sensor inputs that can be coded to control the board's outputs
New items
5609, Kitronik
This Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder.
This prototyping system uses our specially designed Edge Connector Breakout Board for BBC micro:bit that gives full access to the pins on the bottom of the BBC micro:bit. The BBC micro:bit pins are broken out to a row of pin headers, the SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.
This prototyping system is used in conjunction with a Small Prototype Breadboard. This makes it easy to connect additional components using the included jumper wires. No soldering required.
Please Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included.
New items
56113, Kitronik
The Kitronik Solar Cell kit for the environmental control board comes supplied with its own on-board battery holder and also a terminal block for attaching solar cells. This add on pack provides everything you need to take advantage of these features, enabling you to make use of sunlight as a power source. Firstly, insert the batteries and then attach the solar cell to the terminal block with a small screwdriver. No soldering required. This solar cell kit has been put together to provide a renewable power source for the environmental control board. The kit comprises 3 x AA Ni-MH 1300mAh Rechargeable Batteries and a 5.0V 130mA polycrystalline solar cell.
This kit provides a renewable power source for the kitronik environmental control board
No soldering required
Solar cell features maximum current 130mA and maximum power 0.65V
The batteries are rechargeable making them a cost-effective and greener way of powering your projects
They have a capacity of 1300mAh and a nominal output of 1.2V
New items
2407, Kitronik
Pack of ten wires in a selection of five colours each with insulated crocodile clips on both ends.
Lead length 0.5m
Max current 0.5 Amp
New items
5698, Kitronik
Add motor driving capability to the micro:bit with the Kitronik compact motor driver board for the BBC micro:bit. This motor driver board allows two motors to be driven simultaneously with forward, reverse & stop control, making it ideal for designs such as buggies. The board has built-in short circuit, over current and thermal protection.
The board includes an integrated Edge Connector for your BBC micro:bit to easily slot into. It also features external connections to the button A and button B inputs. This allows additional switches/inputs to be connected to the motor driver board and the state of these can then be read by the BBC micro:bit.
There are 2 additional inputs/outputs. These can be used for connecting a range of parts and can be used in either digital or analogue modes.
New items
5601B, Kitronik
Looking to do more with your BBC micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the BBC micro:bit. It provides access to all of the BBC micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the BBC micro:bit.
This Edge Connector Breakout Board for the BBC micro:bit gives access to all of the important pins on the bottom edge of the BBC micro:bit. 21 pins are broken out in total
providing additional I/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.
New items
2480, Kitronik
This is a 4 pack of wires that are pre-terminated with an alligator (crocodile) clip on one end and a hookup pigtail (male jumper connector) on the other. Alligator clips are a staple part for any workbench and with these cables you will be able to easily incorporate those clips into a breadboard, development platform, or anything else that you would normally be able to attach a male jumper connector to.
Each Alligator Clip with Pigtail cable has a wire length of 30cm and a male pin that easily inserts into a standard 0.1" connector. Each pack consists of two red cables and two black cables.
New items
5607, Kitronik
This kit is a great way to get started with creating BBC micro:bit controlled E-Textiles projects and designs.
We have selected a number of products from our Electro-Fashion range, including five regular 5mm LEDs, ten of our ultra-slim LEDs, ten crocodile clips and 6 meters of conductive thread. There are enough components for you get started immediately to create our Emoji Bag and Rocket Pencil Case projects with enough extra LEDs and Crocodile clips to also create something of your own design.
New items
5643, Kitronik
The LAMP:bit features connections which allow the micro:bit to be bolted/clipped directly to it. It has been designed to replicate a streetlight, in form and function. This is a great board for use in transportation projects and has been designed to fit the same aesthetic as the STOP:bit, so that they can be used together in the same projects.
The board also features a phototransistor that can be used to react to changes in ambient light levels, thus switching on and off the white LED autonomously. For timed switching, the project could include the Kitronik RTC board for a different type of autonomy.
Power is supplied to the board from the micro:bit that is connected to it via the 0V and 3V pins.
Please Note: BBC micro:bit is NOT included.
Don’t hesitate to ask questions for better clarification.