Innomaker

The Innomaker USB2CAN-X2 is a 'plug and play' and bi-directional port powered USB to CAN converter which realizes long-distance communication between Raspberry Pi/SBC/PC and other devices stably though CAN- Bus connection. Dual channels can be set up independently , It's a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateurc hobbyist.USB2CAN can also be applied to obtain the data of car via the OBD connector, but you need to configured and secondary development by yourself. It support Linux system , It's a socket-can device in Linux, not need to install any driver and fully compatible with other socket-can software in Linux such as can-utils. USB2CAN support Mac OS version equal or above 10.11 and provide development library for help customer develop own applications. Support Windows System, Mac OS, Linux, Raspbian(v5.4 kernel) and Ubuntu Provides 3000VDC voltage isolation and 15kV Bus-Pin ESD protection Plug and Play USB CAN device and no external power required Provide C/Python with Socket-CAN feature for Raspbian(Linux), C#/C++ demo for Windows, dynamic library and demo with IOUSB Kit for Mac Os(Big Sur)

The Innomaker CAM-MIPI327RAW is a low-cost fisheye Lens excellent low illumination and wide dynamic camera module, designed for whole series Raspberry (P4/Pi3B+/PI3A+/PI3/CM3/CM3+). Plug into the CSI-2 Pi camera interface directly. On-board IMX327LQR-C is a diagonal 6.46 mm (Type 1/2.8) CMOS active pixel type solid-state image sensor with a square pixel array and 2.13 M effective pixels. This chip operates with analog 2.9 V, digital 1.2 V, and interface 1.8 V triple power supply, and has low power consumption. High sensitivity, low dark current and no smear are achieved through the adoption of R, G and B primary colour mosaic filters. This chip features an electronic shutter with variable charge integration time. Raspberry Pi Camera CAM-MIPI327RAW is an Industrial Camera Module for Raspberry Pi 4,3B+ 3B, 3A+ CM3+, CM3, Pi zero Sensor Type: STARVIS IMX327LQR Colour CMOS Active Pixel type Solid-state Image Sensor with Square Pixel Array 2.13 M Effective Pixels Low power consumption module Match a wide angle Lens and focal distance is adjustable Comes with user manual, test demo and friendly technology support

The Innomaker USB2CAN module is a ’plug and play’ and bi-directional port powered USB to CAN converter which realizes long-distance communication between Raspberry Pi/SBC/PC and other devices stably though CAN- Bus connection. With small size and convenient operation, It’s a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateur hobbyist. USB2CAN can also be applied to obtain the data of car via the OBD connector, but you need to configured and secondary development by yourself. It has support Mac OS version equal or above 10.11 and provide development library for help customer develop own applications. Support Windows System, Mac OS and Linux, Raspbian(v5.4 kernel),Ubuntu No external power required, Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily Provides 3000V voltage isolation and 2500V ESD isolated protection on signal pins and 120 Ohm resistor selectable jumper feature Provide C/Python and source code with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSB Kit for Mac Os(Big Sur)

The Innomaker CAM-MIPIOV9281 module is a low-cost, monochrome(Black & White) global shutter camera module, designed for whole series Raspberry (P4/Pi3B+/PI3A+/PI3/CM4/CM3+). Plug into the CSI-2 Pi camera interface directly. CAM-MIPIOV9281 module on board OmniVision's OV9281 is high-speed global shutter image sensors that bring 1-megapixel resolution to a wide range of consumer and industrial computer vision applications, including augmented reality (AR), virtual reality (VR), collision avoidance in drones, bar code scanning and factory automation. technology, the OV9281 and OV9282 feature a high-speed global shutter pixel with best-in-class near-infrared (NIR) quantum efficiency (QE) to meet high-resolution and low-latency requirements. Support lib camera on Bullseye system, Support for external trigger mode LED and flash strobe mode and gain programmable Uses the technique of optical coupling isolation TLP281 Match a wide angle fisheye Lens and Focal distance is adjustable Comes with user manual, test demo and friendly technology support

InnoMaker USB-CAN analyzer converter module is a “plug and play ” and bi-directional port powered USB to CAN converter which realizes long-distance communication between your Raspberry Pi and other devices stably though CAN- Bus connection. Compatible with Raspberry Pi Zero/Zero W/2B/3B/3B+/4B. With small size and convenient operation, It’s a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateur hobbyist. CAN: D-SUB, 9 pins USB: USB 2.0 Full-Speed, Micro USB Specification: 2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN Data Rate: From 20kbps to 1Mbps can be programmed arbitrarily Isolation Voltage: 1.5K VDC/min, 3K VDC/1s Microcontroller: STM32F0, 48MHz Termination: 120 Ohm resistor selectable jumper CAN Transceiver: ISO1050DUBR ,Texas Instruments Work Temperature: -40°∼ 85° Relative humidity: 15-90%, not condensing PCBA Size (L * W * H): 56.50mm * 31.20mm * 14.20mm Weight: 15.5 g 1 x USB to CAN Converter 1 x Terminal Block 1 x USB Cable Packing List:

The Innomaker USB2CAN-X2 is a 'plug and play' and bi-directional port powered USB to CAN converter which realizes long-distance communication between Raspberry Pi/SBC/PC and other devices stably though CAN- Bus connection. Dual channels can be set up independently , It's a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateurc hobbyist.USB2CAN can also be applied to obtain the data of car via the OBD connector, but you need to configured and secondary development by yourself. It support Linux system , It's a socket-can device in Linux, not need to install any driver and fully compatible with other socket-can software in Linux such as can-utils. USB2CAN support Mac OS version equal or above 10.11 and provide development library for help customer develop own applications. Support Windows System, Mac OS, Linux, Raspbian(v5.4 kernel) and Ubuntu Provides 3000VDC voltage isolation and 15kV Bus-Pin ESD protection Plug and Play USB CAN device and no external power required Provide C/Python with Socket-CAN feature for Raspbian(Linux), C#/C++ demo for Windows, dynamic library and demo with IOUSB Kit for Mac Os(Big Sur)

The Innomaker CAM-MIPI327RAW is a low-cost fisheye Lens excellent low illumination and wide dynamic camera module, designed for whole series Raspberry (P4/Pi3B+/PI3A+/PI3/CM3/CM3+). Plug into the CSI-2 Pi camera interface directly. On-board IMX327LQR-C is a diagonal 6.46 mm (Type 1/2.8) CMOS active pixel type solid-state image sensor with a square pixel array and 2.13 M effective pixels. This chip operates with analog 2.9 V, digital 1.2 V, and interface 1.8 V triple power supply, and has low power consumption. High sensitivity, low dark current and no smear are achieved through the adoption of R, G and B primary colour mosaic filters. This chip features an electronic shutter with variable charge integration time. Raspberry Pi Camera CAM-MIPI327RAW is an Industrial Camera Module for Raspberry Pi 4,3B+ 3B, 3A+ CM3+, CM3, Pi zero Sensor Type: STARVIS IMX327LQR Colour CMOS Active Pixel type Solid-state Image Sensor with Square Pixel Array 2.13 M Effective Pixels Low power consumption module Match a wide angle Lens and focal distance is adjustable Comes with user manual, test demo and friendly technology support

The Innomaker USB2CAN module is a ’plug and play’ and bi-directional port powered USB to CAN converter which realizes long-distance communication between Raspberry Pi/SBC/PC and other devices stably though CAN- Bus connection. With small size and convenient operation, It’s a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateur hobbyist. USB2CAN can also be applied to obtain the data of car via the OBD connector, but you need to configured and secondary development by yourself. It has support Mac OS version equal or above 10.11 and provide development library for help customer develop own applications. Support Windows System, Mac OS and Linux, Raspbian(v5.4 kernel),Ubuntu No external power required, Support wider CAN baud rate, from 20Kbps to 1Mbps can be programmed arbitrarily Provides 3000V voltage isolation and 2500V ESD isolated protection on signal pins and 120 Ohm resistor selectable jumper feature Provide C/Python and source code with Socket-CAN for Raspbian(Linux), Dynamic library and demo with IOUSB Kit for Mac Os(Big Sur)

The Innomaker CAM-MIPIOV9281 module is a low-cost, monochrome(Black & White) global shutter camera module, designed for whole series Raspberry (P4/Pi3B+/PI3A+/PI3/CM4/CM3+). Plug into the CSI-2 Pi camera interface directly. CAM-MIPIOV9281 module on board OmniVision's OV9281 is high-speed global shutter image sensors that bring 1-megapixel resolution to a wide range of consumer and industrial computer vision applications, including augmented reality (AR), virtual reality (VR), collision avoidance in drones, bar code scanning and factory automation. technology, the OV9281 and OV9282 feature a high-speed global shutter pixel with best-in-class near-infrared (NIR) quantum efficiency (QE) to meet high-resolution and low-latency requirements. Support lib camera on Bullseye system, Support for external trigger mode LED and flash strobe mode and gain programmable Uses the technique of optical coupling isolation TLP281 Match a wide angle fisheye Lens and Focal distance is adjustable Comes with user manual, test demo and friendly technology support

InnoMaker USB-CAN analyzer converter module is a “plug and play ” and bi-directional port powered USB to CAN converter which realizes long-distance communication between your Raspberry Pi and other devices stably though CAN- Bus connection. Compatible with Raspberry Pi Zero/Zero W/2B/3B/3B+/4B. With small size and convenient operation, It’s a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateur hobbyist. CAN: D-SUB, 9 pins USB: USB 2.0 Full-Speed, Micro USB Specification: 2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN Data Rate: From 20kbps to 1Mbps can be programmed arbitrarily Isolation Voltage: 1.5K VDC/min, 3K VDC/1s Microcontroller: STM32F0, 48MHz Termination: 120 Ohm resistor selectable jumper CAN Transceiver: ISO1050DUBR ,Texas Instruments Work Temperature: -40°∼ 85° Relative humidity: 15-90%, not condensing PCBA Size (L * W * H): 56.50mm * 31.20mm * 14.20mm Weight: 15.5 g 1 x USB to CAN Converter 1 x Terminal Block 1 x USB Cable Packing List: