Featured Products
IDEM HYGIELOCK Solenoid Interlock Switch The HYGIELOCK is a guard locking safety interlock switch that fits...
IDEM RAMZLOCK KLTM Solenoid Interlock Switch with Unique RFID Coding The RAMZLOCK KLTM-RFID series from IDEM are solenoid locking door switches...
IDEM Kobra INCH Safety Interlock Switches The Kobra INCH series from IDEM are tongue operated safety interl...
IDEM Guardian Line Safety Rope Pull Accessories A range of accessories to support the Guardian Line rope pu...
IDEM Emergency Stop Switches The ESL-SS series from IDEM are standard duty emergency stop switches designed...
IDEM Safety Switch Accessories A range of accessories for IDEM safety switches....
IDEM Guardian Line GLM Mini Safety Rope Pull Switches The Guardian Line GLM from IDEM are safety rope pull...
IDEM Kobra Stainless Steel Safety Interlock Switches The Kobra Hygiecam series from IDEM are tongue operate...
IDEM Kobra Plastic Safety Interlock Switches The Kobra KP series from IDEM are tongue operated safety interlock switches that fit to the leading...
IDEM Kobra Plastic Safety Interlock Switches The Kobra KP series from IDEM are tongue operated safety interlock switches that fit to the leading...
IDEM Kobra Stainless Steel Safety Interlock Switches The Kobra Hygiecam series from IDEM are tongue operated safety interlock switches that fit...
IDEM HYGIECODE LMC Non Contact Safety Switch The HYGIECODE MMC-H safety switch has been developed for non-contact i...
Popular Categories For IDEM
Popular Items
Popular items
205021, IDEM
IDEM HYGIELOCK Solenoid Interlock Switch
The HYGIELOCK is a guard locking safety interlock switch that fits to the leading edge of sliding or hinged machine guards. It provides a lock mechanism to keep the guard closed until the hazard has been removed. It is tongue operated with positively operated switching contacts and a strong tamper resistant key mechanism. It provides robust position interlock detection for moving guards.
This solenoid interlock switch can be used with safety timers to provide a delay before allowing the guard to open (for example machines that require a rundown). Depending upon the risk assessment for the application, it can be used independently to provide positively operated contacts to IEC 60947-5-1 or used with any dual channel safety monitoring relay to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061..
Features and Benefits
Power to unlock
Rear manual release button, stock nos.
826-4013
,
826-4016
,
826-4019
Stainless steel 316 body and head
2 lock monitoring safety contacts for high function and diagnostic specification
2 emergency manual release points
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Rotatable head
Connects to most safety relays to give up to PLe Cat.4
3 conduit entry points M20
LED status of solenoid applied power
IP69K protection
High holding force 2000 N
8 actuator entry positions
30 mm fixing centres
Applications
The HYGIELOCK solenoid interlock switch and has been designed for use in the Food Processing, Pharmaceutical, Packaging and Petrochemical industries.
Note
Not supplied with an actuator. Standard, flat, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish.
...
Popular items
140016, IDEM
IDEM Guardian Line Safety Rope Pull Accessories
A range of accessories to support the Guardian Line rope pull switches.
826-4136
, 5m rope kit, 3 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4145
, 10m rope kit, 5 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4148
, 15m rope kit, 7 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4142
, 20m rope kit, 9 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4151
, 30m rope kit, 12 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4154
, 50m rope kit, 20 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4158
, 80m rope kit, 30 eyebolts, 2 tensioner/grippers, 2 Allen keys
826-4167
, 100m rope kit, 37 eyebolts, 2 tensioner/grippers, 2 Allen keys
826-4160
, safety end spring
826-4164
, universal pulley (inside & outside corners)
826-4173
, cable gland, M20 x 1.5
123-7509
, Flexible Roller Eyebolt with Adjustment
123-7510
, Flexible Roller Eyebolt with Nuts
Popular items
200025, IDEM
IDEM Kobra Plastic Safety Interlock Switches
The Kobra KP series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra KP can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061. A choice of contact blocks and various actuators are available to aid installation and maintain durability.
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Contact blocks can be replaced
4 actuator entry positions
Rotatable heads
Polyester housing
Stock nos.
826-3928
and
826-3937
have stainless steel heads
3 or 4 pole contact blocks 2NC / 1NO, 3NC / 1NO or 4NC
3 conduit entry points M20
IP67 protection
Industry standard - 40mm fixing centres
Housing: 52 x 98 x 40mm
Note
Only stock no.
826-3925
is supplied with a flat actuator. Standard, flat, plastic flexible, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish.
Approvals
CE, cULus, TUV.
Standards
EN1088, IEC 60947-5-1, EN60204-1, ISO 13849-1, EN62061, EN954-1, UL508.
Interlock Switch
Popular items
204007, IDEM
IDEM Kobra Stainless Steel Safety Interlock Switches
The Kobra Hygiecam series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra Hygiecam can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061.
These safety interlock switches have a rugged stainless steel 316 body and have been designed to cope with the rigorous applications of the Food Processing, Pharmaceutical, Packaging and Petro-Chemical industries.
Two versions are available, the K-SS and KM-SS, which offer a choice of contact blocks and various actuators to aid installation and maintain durability.
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Contact blocks can be replaced
3 or 4 pole contact blocks 2NC / 1NO or 3NC / 1NO
Rotatable stainless steel 316 head
Stainless steel 316 body and external fixings
Connects to most safety relays to give up to PLe Cat.4
IP69K protection maintained by a double seal lid gasket and seals
Can be high pressure hosed with detergent at high temperature
Resistance to many organic and inorganic chemicals
Suitable for SIP and CIP processes
Hygiecam K-SS Safety Switch
4 actuator entry positions
3 conduit entry points M20
Industry standard housing - will fit on 40mm fixing centres
Housing: 58 x 98 x 34mm
Hygiecam KM-SS Safety Switch
Mirror polished finish
8 actuator entry positions
1 conduit entry points M20
DIN standard body mounting - will fit on 30mm fixing centres
Housing: 41.6 x 118 x 44mm
Note
Not supplied with an actuator. Standard, flat, plastic fl...
Popular items
131105, IDEM
IDEM HYGIECODE LMC Non Contact Safety Switch
The HYGIECODE MMC-H safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.
It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.
When used with a dual channel safety relay, this safety switch can be used to provide up to PLe/Category 4 to ISO13849-1.
Features and Benefits
Coded magnetic actuation
Stainless steel 316 housing mirror polished (Ra4)
No food trap areas
IP67 / IP69K protection
Suitable for CIP cleaning - Food Splash Zones EHEDG Guidelines
Resistant to high temperature hosing and detergent wash down
Compact and robust fitting for small guard applications
Through hole fixing to enable front mounting
Can be mounted unobtrusively in channels or behind doors
Cost-effective interlock solution
Up to PLe ISO 13849-1
LED indication
10 mm wide sensing
22 mm fixing centres
Applications
The HYGIECODE MMC-H Non-contact Safety Switch is designed for use in general factory automation, packaging and some food processing industries.
Note
The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.
Approvals
CE, cULus, TUV.
Standards
EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508.
Supplied with
Actuator.
Popular items
450301, IDEM
IDEM RAMZLOCK KLTM Solenoid Interlock Switch with Unique RFID Coding
The RAMZLOCK KLTM-RFID series from IDEM are solenoid locking door switches with traditional mechanical anti-tamper tongue technology (CAM system) but which also incorporate uniquely coded RFID non contact sensor technology. These switches are ideal for preventing accidental or deliberate attempts to by-pass the interlock offering dual protection as both technologies must be satisfied to enable the machine to be started.
Depending upon the risk assessment for the application, the RAMZLOCK can be used independently to provide positively operated contacts to IEC 60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061.
These RFID switches have a red painted diecast body and stainless steel head and have been developed with a holding force of 2000N to keep medium to large guard doors closed until hazards have been removed. They have a low profile and fixing holes are on an industry standard 73mm centre to enable easy retro fitting to new or existing guards.
The KLTM-RFID safety switches fit to the leading edge of sliding or hinged machine guards and have been designed for use in the Factory Automation, Packaging, Food Processing, Pharmaceutical and Petro-Chemical industries.
Integral high security RFID coding
RFID antenna on front and end entries
High holding force 2000N
Spring to lock when actuator is inserted - energise solenoid to unlock
2 lock monitoring safety contacts for high function and diagnostic specification
Auxiliary PNP outputs for switch status
LED diagnostics for solenoid, lock and RFID
2 emergency manual release points
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Connects to most safety relays to give up to PLe Cat.4
IP67 protection
3 conduit entry points M20
Rugged red painted diecast body and stainless steel head
Will fit on 73mm fixing centres
2 actuator e...
Popular items
222004, IDEM
IDEM Kobra INCH Safety Interlock Switches
The Kobra INCH series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra INCH can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061. Two versions are available, the INCH-1 and INCH-3, which offer a choice of contact blocks and various actuators to aid installation and maintain durability.
Actuator profile designed to match a cam mechanism
Contact blocks can be replaced
8 actuator entry positions
Rotatable stainless steel 316 head
Plastic housing
IP67 protection
INCH-1 Safety Switch
2 pole contact blocks 2NC or 1NC / 1NO
1 conduit entry point
M16 or M12 (Quick Connect) 8 way
Miniature housing: 25mm wide, 55mm long, 17mm fixing
INCH-3 Safety Switch
3 pole contact blocks
3 conduit entry points
M16 or M12 (Quick Connect) 8 way
Housing: 25mm wide, 79mm long, 22mm fixing
Note
Not supplied with an actuator. Standard, flat, and flexible actuators are available separately. The plastic flexible actuator is perfect for tight radius guards. A stainless steel guide is also available separately to assist with guard alignment.
Standards
EN1088, IEC 60947-5-1, EN60204-1, ISO 13849-1, EN62061, EN954-1, UL508.
Interlock Switch
Popular items
200023, IDEM
IDEM Kobra Plastic Safety Interlock Switches
The Kobra KP series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra KP can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061. A choice of contact blocks and various actuators are available to aid installation and maintain durability.
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Contact blocks can be replaced
4 actuator entry positions
Rotatable heads
Polyester housing
Stock nos.
826-3928
and
826-3937
have stainless steel heads
3 or 4 pole contact blocks 2NC / 1NO, 3NC / 1NO or 4NC
3 conduit entry points M20
IP67 protection
Industry standard - 40mm fixing centres
Housing: 52 x 98 x 40mm
Note
Only stock no.
826-3925
is supplied with a flat actuator. Standard, flat, plastic flexible, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish.
Approvals
CE, cULus, TUV.
Standards
EN1088, IEC 60947-5-1, EN60204-1, ISO 13849-1, EN62061, EN954-1, UL508.
Interlock Switch
Popular items
139015, IDEM
IDEM HYGIEMAG SMR Non Contact Safety Switches
The HYGIEMAG SMR safety switch has been developed for non-contact guard door interlocking of hinged, sliding or removable guard doors. It is ideal for applications that require a wide tolerance to misalignment, a high switching capacity or high levels of hygiene. When used with dual channel safety relays, the SMR safety switch can be used to provide up to PLe/Category 4 to ISO13849-1 protection.
Features and Benefits
Magnetic high-power switching
Dual channel safety outputs
Stainless steel 316 housing
High temperature stability up to 105°C
Can be mounted on steel structures
High tolerance to guard misalignment
IP69K protection
Resistant to high temperature hosing and detergent wash down
Conformance to EN60947-5-3 PDF-S
Up to PLe ISO 13849-1
Universal fitting suitable for most general industry applications
Suitable for food splash zones - EHEDG Guidelines
Mirror Polished Finish to Ra4
Suitable for CIP and SIP cleaning
2NC / 1 NO
12 mm wide sensing
Switching capacity 1 A
22 mm fixing centres
Housing: 25.5 x 50 x 13 mm
Applications
The HYGIEMAG SMR non-contact safety switch is ideal for the food processing, pharmaceutical, packaging and chemical industries.
Note
The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.
Approvals
CE, cULus, TUV.
Standards
EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508.
Supplied with
Actuator.
Popular items
143052, IDEM
IDEM Guardian Line GLM Mini Safety Rope Pull Switches
The Guardian Line GLM from IDEM are safety rope pull switches with a compact yet robust yellow diecast housing that protect short conveyor lengths of upto 50m and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.
Switch mechanism will latch the instant the safety contacts open, ISO13850 standard
Upto 30m can be covered using a single switch
Upto 50m can be covered using two switches
Positive break contacts to IEC60947-5-1
Robust yellow diecast housing
IP67 protection
Rugged integral sealing bellows mean they can be high pressure hosed
All internal screws are stainless steel
Easy to wire with 3 x M20 conduit entries
4 pole, either 3NC / 1NO or 2NC / 2NO
Note
826-4101
&
826-4104
have an E-stop and LED.
Approvals
CE, cULus, TUV.
Standards
IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.
Popular items
140107, IDEM
IDEM Safety Switch Accessories
A range of accessories for IDEM safety switches.
Flat Actuator for INCH Series
Angled Actuator for INCH Series
Plastic Flexible Actuator for INCH-1 & 3 Series
Stainless Steel Actuator Guide for INCH-1 & 3 Series
Standard Actuator for KP & K-15 Plastic Series
Standard Actuator for K,KP,KL & KM Metal Series
Plastic Flexible Actuator for KP & KM Series
Flat Actuator for KP,KM,KLP & KLM Series
Heavy Flexible Actuator for KP,KM,KLP & KLM Series
Flexible Actuator for KP,KM,KLP,KL3-SS & K-SS Series
Stainless Steel Cable Gland M20x1.5
Lock Out Actuator fo K-15,K-SS,KP & KM Series
Sliding Handle Gate Bolt, Left
Sliding Handle Gate Bolt, Right
Rear Handle for GBL-1 & GBA-1 Series
Spring Loaded Catch for GBL-1 & GBA-1 Series
Manual Release Key for KL1-SS,KL3-SS & KL4-SS Series
Interlock Switch
Popular items
208007, IDEM
IDEM Kobra Stainless Steel Safety Interlock Switches
The Kobra Hygiecam series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra Hygiecam can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061.
These safety interlock switches have a rugged stainless steel 316 body and have been designed to cope with the rigorous applications of the Food Processing, Pharmaceutical, Packaging and Petro-Chemical industries.
Two versions are available, the K-SS and KM-SS, which offer a choice of contact blocks and various actuators to aid installation and maintain durability.
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Contact blocks can be replaced
3 or 4 pole contact blocks 2NC / 1NO or 3NC / 1NO
Rotatable stainless steel 316 head
Stainless steel 316 body and external fixings
Connects to most safety relays to give up to PLe Cat.4
IP69K protection maintained by a double seal lid gasket and seals
Can be high pressure hosed with detergent at high temperature
Resistance to many organic and inorganic chemicals
Suitable for SIP and CIP processes
Hygiecam K-SS Safety Switch
4 actuator entry positions
3 conduit entry points M20
Industry standard housing - will fit on 40mm fixing centres
Housing: 58 x 98 x 34mm
Hygiecam KM-SS Safety Switch
Mirror polished finish
8 actuator entry positions
1 conduit entry points M20
DI...
New Items
New items
205021, IDEM
IDEM HYGIELOCK Solenoid Interlock Switch
The HYGIELOCK is a guard locking safety interlock switch that fits to the leading edge of sliding or hinged machine guards. It provides a lock mechanism to keep the guard closed until the hazard has been removed. It is tongue operated with positively operated switching contacts and a strong tamper resistant key mechanism. It provides robust position interlock detection for moving guards.
This solenoid interlock switch can be used with safety timers to provide a delay before allowing the guard to open (for example machines that require a rundown). Depending upon the risk assessment for the application, it can be used independently to provide positively operated contacts to IEC 60947-5-1 or used with any dual channel safety monitoring relay to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061..
Features and Benefits
Power to unlock
Rear manual release button, stock nos.
826-4013
,
826-4016
,
826-4019
Stainless steel 316 body and head
2 lock monitoring safety contacts for high function and diagnostic specification
2 emergency manual release points
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Rotatable head
Connects to most safety relays to give up to PLe Cat.4
3 conduit entry points M20
LED status of solenoid applied power
IP69K protection
High holding force 2000 N
8 actuator entry positions
30 mm fixing centres
Applications
The HYGIELOCK solenoid interlock switch and has been designed for use in the Food Processing, Pharmaceutical, Packaging and Petrochemical industries.
Note
Not supplied with an actuator. Standard, flat, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish.
...
New items
450301, IDEM
IDEM RAMZLOCK KLTM Solenoid Interlock Switch with Unique RFID Coding
The RAMZLOCK KLTM-RFID series from IDEM are solenoid locking door switches with traditional mechanical anti-tamper tongue technology (CAM system) but which also incorporate uniquely coded RFID non contact sensor technology. These switches are ideal for preventing accidental or deliberate attempts to by-pass the interlock offering dual protection as both technologies must be satisfied to enable the machine to be started.
Depending upon the risk assessment for the application, the RAMZLOCK can be used independently to provide positively operated contacts to IEC 60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO 13849-1 or SIL3 EN62061.
These RFID switches have a red painted diecast body and stainless steel head and have been developed with a holding force of 2000N to keep medium to large guard doors closed until hazards have been removed. They have a low profile and fixing holes are on an industry standard 73mm centre to enable easy retro fitting to new or existing guards.
The KLTM-RFID safety switches fit to the leading edge of sliding or hinged machine guards and have been designed for use in the Factory Automation, Packaging, Food Processing, Pharmaceutical and Petro-Chemical industries.
Integral high security RFID coding
RFID antenna on front and end entries
High holding force 2000N
Spring to lock when actuator is inserted - energise solenoid to unlock
2 lock monitoring safety contacts for high function and diagnostic specification
Auxiliary PNP outputs for switch status
LED diagnostics for solenoid, lock and RFID
2 emergency manual release points
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Connects to most safety relays to give up to PLe Cat.4
IP67 protection
3 conduit entry points M20
Rugged red painted diecast body and stainless steel head
Will fit on 73mm fixing centres
2 actuator e...
New items
222004, IDEM
IDEM Kobra INCH Safety Interlock Switches
The Kobra INCH series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra INCH can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061. Two versions are available, the INCH-1 and INCH-3, which offer a choice of contact blocks and various actuators to aid installation and maintain durability.
Actuator profile designed to match a cam mechanism
Contact blocks can be replaced
8 actuator entry positions
Rotatable stainless steel 316 head
Plastic housing
IP67 protection
INCH-1 Safety Switch
2 pole contact blocks 2NC or 1NC / 1NO
1 conduit entry point
M16 or M12 (Quick Connect) 8 way
Miniature housing: 25mm wide, 55mm long, 17mm fixing
INCH-3 Safety Switch
3 pole contact blocks
3 conduit entry points
M16 or M12 (Quick Connect) 8 way
Housing: 25mm wide, 79mm long, 22mm fixing
Note
Not supplied with an actuator. Standard, flat, and flexible actuators are available separately. The plastic flexible actuator is perfect for tight radius guards. A stainless steel guide is also available separately to assist with guard alignment.
Standards
EN1088, IEC 60947-5-1, EN60204-1, ISO 13849-1, EN62061, EN954-1, UL508.
Interlock Switch
New items
140021, IDEM
IDEM Guardian Line Safety Rope Pull Accessories
A range of accessories to support the Guardian Line rope pull switches.
826-4136
, 5m rope kit, 3 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4145
, 10m rope kit, 5 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4148
, 15m rope kit, 7 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4142
, 20m rope kit, 9 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4151
, 30m rope kit, 12 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4154
, 50m rope kit, 20 eyebolts, 1 tensioner/gripper, 1 Allen key
826-4158
, 80m rope kit, 30 eyebolts, 2 tensioner/grippers, 2 Allen keys
826-4167
, 100m rope kit, 37 eyebolts, 2 tensioner/grippers, 2 Allen keys
826-4160
, safety end spring
826-4164
, universal pulley (inside & outside corners)
826-4173
, cable gland, M20 x 1.5
123-7509
, Flexible Roller Eyebolt with Adjustment
123-7510
, Flexible Roller Eyebolt with Nuts
New items
232001, IDEM
IDEM Emergency Stop Switches
The ESL-SS series from IDEM are standard duty emergency stop switches designed to provide robust emergency stop protection for machines or exposed conveyors.
IP69K stainless steel 316 can be high pressure hosed with detergents at high temperature
3 pole contact blocks provide positively operated switch contacts
Conformance to ISO13850, EN60947-5-1 and EN60947-5-5
A special lid safety trip mechanism means that the safety contacts will open if the lid is removed
Connects to most safety relays to give up to PLe Cat.4
Stock nos.
826-4413
,
826-4417
,
826-4426
&
826-4429
have button protection shroud with padlock holes for Lock Off" in maintenance situations
Stock nos.
826-4426
&
826-4429
have 2-colour LED (Steady Green/Flashing Red)
Standards
EN 60947-5-1, EN 60947-5-5, EN 62061, UL 508, ISO 13850, ISO 13849-1.
Emergency Stop Pushbutton
New items
140107, IDEM
IDEM Safety Switch Accessories
A range of accessories for IDEM safety switches.
Flat Actuator for INCH Series
Angled Actuator for INCH Series
Plastic Flexible Actuator for INCH-1 & 3 Series
Stainless Steel Actuator Guide for INCH-1 & 3 Series
Standard Actuator for KP & K-15 Plastic Series
Standard Actuator for K,KP,KL & KM Metal Series
Plastic Flexible Actuator for KP & KM Series
Flat Actuator for KP,KM,KLP & KLM Series
Heavy Flexible Actuator for KP,KM,KLP & KLM Series
Flexible Actuator for KP,KM,KLP,KL3-SS & K-SS Series
Stainless Steel Cable Gland M20x1.5
Lock Out Actuator fo K-15,K-SS,KP & KM Series
Sliding Handle Gate Bolt, Left
Sliding Handle Gate Bolt, Right
Rear Handle for GBL-1 & GBA-1 Series
Spring Loaded Catch for GBL-1 & GBA-1 Series
Manual Release Key for KL1-SS,KL3-SS & KL4-SS Series
Interlock Switch
New items
143052, IDEM
IDEM Guardian Line GLM Mini Safety Rope Pull Switches
The Guardian Line GLM from IDEM are safety rope pull switches with a compact yet robust yellow diecast housing that protect short conveyor lengths of upto 50m and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection.
In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950.
Switch mechanism will latch the instant the safety contacts open, ISO13850 standard
Upto 30m can be covered using a single switch
Upto 50m can be covered using two switches
Positive break contacts to IEC60947-5-1
Robust yellow diecast housing
IP67 protection
Rugged integral sealing bellows mean they can be high pressure hosed
All internal screws are stainless steel
Easy to wire with 3 x M20 conduit entries
4 pole, either 3NC / 1NO or 2NC / 2NO
Note
826-4101
&
826-4104
have an E-stop and LED.
Approvals
CE, cULus, TUV.
Standards
IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.
New items
208007, IDEM
IDEM Kobra Stainless Steel Safety Interlock Switches
The Kobra Hygiecam series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra Hygiecam can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061.
These safety interlock switches have a rugged stainless steel 316 body and have been designed to cope with the rigorous applications of the Food Processing, Pharmaceutical, Packaging and Petro-Chemical industries.
Two versions are available, the K-SS and KM-SS, which offer a choice of contact blocks and various actuators to aid installation and maintain durability.
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Contact blocks can be replaced
3 or 4 pole contact blocks 2NC / 1NO or 3NC / 1NO
Rotatable stainless steel 316 head
Stainless steel 316 body and external fixings
Connects to most safety relays to give up to PLe Cat.4
IP69K protection maintained by a double seal lid gasket and seals
Can be high pressure hosed with detergent at high temperature
Resistance to many organic and inorganic chemicals
Suitable for SIP and CIP processes
Hygiecam K-SS Safety Switch
4 actuator entry positions
3 conduit entry points M20
Industry standard housing - will fit on 40mm fixing centres
Housing: 58 x 98 x 34mm
Hygiecam KM-SS Safety Switch
Mirror polished finish
8 actuator entry positions
1 conduit entry points M20
DI...
New items
200023, IDEM
IDEM Kobra Plastic Safety Interlock Switches
The Kobra KP series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra KP can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061. A choice of contact blocks and various actuators are available to aid installation and maintain durability.
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Contact blocks can be replaced
4 actuator entry positions
Rotatable heads
Polyester housing
Stock nos.
826-3928
and
826-3937
have stainless steel heads
3 or 4 pole contact blocks 2NC / 1NO, 3NC / 1NO or 4NC
3 conduit entry points M20
IP67 protection
Industry standard - 40mm fixing centres
Housing: 52 x 98 x 40mm
Note
Only stock no.
826-3925
is supplied with a flat actuator. Standard, flat, plastic flexible, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish.
Approvals
CE, cULus, TUV.
Standards
EN1088, IEC 60947-5-1, EN60204-1, ISO 13849-1, EN62061, EN954-1, UL508.
Interlock Switch
New items
200025, IDEM
IDEM Kobra Plastic Safety Interlock Switches
The Kobra KP series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra KP can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061. A choice of contact blocks and various actuators are available to aid installation and maintain durability.
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Contact blocks can be replaced
4 actuator entry positions
Rotatable heads
Polyester housing
Stock nos.
826-3928
and
826-3937
have stainless steel heads
3 or 4 pole contact blocks 2NC / 1NO, 3NC / 1NO or 4NC
3 conduit entry points M20
IP67 protection
Industry standard - 40mm fixing centres
Housing: 52 x 98 x 40mm
Note
Only stock no.
826-3925
is supplied with a flat actuator. Standard, flat, plastic flexible, heavy duty flexible and hygienic actuators are available separately. The flexible actuators are perfect for tight radius guards. The hygienic actuator is made from stainless steel with a mirror polished finish.
Approvals
CE, cULus, TUV.
Standards
EN1088, IEC 60947-5-1, EN60204-1, ISO 13849-1, EN62061, EN954-1, UL508.
Interlock Switch
New items
204007, IDEM
IDEM Kobra Stainless Steel Safety Interlock Switches
The Kobra Hygiecam series from IDEM are tongue operated safety interlock switches that fit to the leading edge of sliding, hinged or lift off machine guards. These safety switches have positively operated switching contacts and a strong tamper resistant key mechanism designed to provide robust position interlock detection for moving guards.
Depending upon the risk assessment for the application, the Kobra Hygiecam can be used independently to provide positively operated contacts to EN60947-5-1 or can be used in combination with any dual channel safety monitoring relays to provide up to Category 4 PLe ISO13849-1 or SIL3 EN62061.
These safety interlock switches have a rugged stainless steel 316 body and have been designed to cope with the rigorous applications of the Food Processing, Pharmaceutical, Packaging and Petro-Chemical industries.
Two versions are available, the K-SS and KM-SS, which offer a choice of contact blocks and various actuators to aid installation and maintain durability.
Positive break contacts to IEC 60947-5-1
High functional safety to ISO 13849-1
Contact blocks can be replaced
3 or 4 pole contact blocks 2NC / 1NO or 3NC / 1NO
Rotatable stainless steel 316 head
Stainless steel 316 body and external fixings
Connects to most safety relays to give up to PLe Cat.4
IP69K protection maintained by a double seal lid gasket and seals
Can be high pressure hosed with detergent at high temperature
Resistance to many organic and inorganic chemicals
Suitable for SIP and CIP processes
Hygiecam K-SS Safety Switch
4 actuator entry positions
3 conduit entry points M20
Industry standard housing - will fit on 40mm fixing centres
Housing: 58 x 98 x 34mm
Hygiecam KM-SS Safety Switch
Mirror polished finish
8 actuator entry positions
1 conduit entry points M20
DIN standard body mounting - will fit on 30mm fixing centres
Housing: 41.6 x 118 x 44mm
Note
Not supplied with an actuator. Standard, flat, plastic fl...
New items
131105, IDEM
IDEM HYGIECODE LMC Non Contact Safety Switch
The HYGIECODE MMC-H safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.
It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.
When used with a dual channel safety relay, this safety switch can be used to provide up to PLe/Category 4 to ISO13849-1.
Features and Benefits
Coded magnetic actuation
Stainless steel 316 housing mirror polished (Ra4)
No food trap areas
IP67 / IP69K protection
Suitable for CIP cleaning - Food Splash Zones EHEDG Guidelines
Resistant to high temperature hosing and detergent wash down
Compact and robust fitting for small guard applications
Through hole fixing to enable front mounting
Can be mounted unobtrusively in channels or behind doors
Cost-effective interlock solution
Up to PLe ISO 13849-1
LED indication
10 mm wide sensing
22 mm fixing centres
Applications
The HYGIECODE MMC-H Non-contact Safety Switch is designed for use in general factory automation, packaging and some food processing industries.
Note
The normally closed (NC) circuits are closed when the guard is closed and the actuator is present.
Approvals
CE, cULus, TUV.
Standards
EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508.
Supplied with
Actuator.
Don’t hesitate to ask questions for better clarification.