HellermannTyton Connectivity Profile
Featured Products
The HellermannTyton customer connection enclosure (CCE) supports a maximum 2 x SC simplex or LC duplex adaptors. The closure is manufactured from...
The HellermannTyton duplex patch leads are manufactured using 5.0 mm buffered fibre optic cable which is sheathed in LS0H material making them su...
The HellermannTyton fibre wall outlet is manufactured from ABS plastic and tamper proof latches secure the cover to the base. The Pre-terminated...
The HellermannTyton POD box part of the zone cabling product range offers flexibility within a structured cabling network. Each POD is assembled...
The HellermannTyton customer connection enclosure (CCE) is supplied with 1 x LC/PC duplex adaptor and 1 x LC/PC 900μm pigtail 1m. The closure is...
The HellermannTyton customer connection point (CCP) is manufactured from VO and UV stable black polycarbonate and has a fully detachable snap on...
The HellermannTyton customer connection point (CCP) is manufactured from VO and UV stable black polycarbonate and has a fully detachable snap on...
The HellermannTyton customer connection point (CCP) The closure is manufactured from V0 and UV stable black polycarbonate and has a fully detacha...
The HellermannTyton 4 port inline CCPXL is supplied with 1 x LC PC duplex adaptor and 2 x 1m pigtails. Each cable access point is sealed with a c...
The HellermannTyton duplex patch leads are manufactured using 3.0 mm buffered fibre optic cable which is sheathed in LS0H material making them su...
The HellermannTyton duplex patch leads are manufactured using 3.0 mm buffered fibre optic cable which is sheathed in LS0H material making them su...
The HellermannTyton fibre wall outlet is manufactured from ABS plastic and tamper proof latches secure the cover to the base. The Pre-terminated...
Popular Categories For HellermannTyton Connectivity
Popular Items
Popular items
CCE-A1112XXX1/BK, HellermannTyton Connectivity
The HellermannTyton customer connection enclosure (CCE) supports a maximum 2 x SC simplex or LC duplex adaptors. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre.
Maximum capacity is 2 x SC simplex or LC duplex adaptors
Fibre management for 4 x 3A splices
Integral positive fibre management and storage capacity
6 inbound & outbound access points (2 x 6.0 - 8.5 mm and 1 x 2.5 - 6.5 mm)
Through the wall capability
Loop through facility
Tamper proof fitting, captive screw and nut
IP55 rated
Popular items
FLCXXS2-SCSCDY-05.0M, HellermannTyton Connectivity
The HellermannTyton duplex patch leads are manufactured using 5.0 mm buffered fibre optic cable which is sheathed in LS0H material making them suitable for internal use. HellermannTytons duplex patch leads are manufactured to the highest quality and tested to exceed the latest published version of ISO/IEC 11801 and ANSI/TIA 568. NB.
Simplex and duplex options available
5.0 mm buffered fibre optic cable
Pre tested with test results supplied
Patch leads are packaged individually in bags with test results
Popular items
FWOA-VVW22-010/WH, HellermannTyton Connectivity
The HellermannTyton fibre wall outlet is manufactured from ABS plastic and tamper proof latches secure the cover to the base. The Pre-terminated FWO is supplied with a 2 fibre G657.A1 10m cable and is fitted with a 2 x SC PC connector and 2 x SC SX PC adaptors. The pre-terminated adaptor is placed in to the wall outlet and the cable is routed through the rear of the outlet.
Cable entry through base
Install directly on the wall or onto a flush-mount back box
accommodates up to 4 splice protectors (up to 45 mm)
Quality surface finish
Tamper proof latches
Positive fibre management to ensure a 30 mm minimum bend radius
Popular items
HT-POD-25MM-6P, HellermannTyton Connectivity
The HellermannTyton POD box part of the zone cabling product range offers flexibility within a structured cabling network. Each POD is assembled with angled LJ6C adaptors which are compatible with HTC tool free keystone jacks, or GST keystone jacks.
IK07 rated
Assembled with HTC 6C angled adaptors
Compatible with HTC tool free jacks or GST jacks only
Integral anchor point for cable bundles
Port and POD labelling fields
Secure & temporary fixing points
Popular items
CCE-A11121L11/BK, HellermannTyton Connectivity
The HellermannTyton customer connection enclosure (CCE) is supplied with 1 x LC/PC duplex adaptor and 1 x LC/PC 900μm pigtail 1m. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre.
1 x LC & PC 900μm pigtail
Fibre management for 4 x 3A splices
Integral positive fibre management and storage capacity
6 inbound & outbound access points (2 x 6.0-8.5 mm and 1 x 2.5 - 6.5 mm)
Through the wall capability
Loop through facility
Tamper proof fitting, captive screw and nut
IP55 rated
Popular items
CCPA-M111LP/BK-0, HellermannTyton Connectivity
The HellermannTyton customer connection point (CCP) is manufactured from VO and UV stable black polycarbonate and has a fully detachable snap on lid. The closure has 2 separate cable access points which are sealed with a silicon cable entry kit to maintain the IP68 rating.
IP68 sealing gives a high level of performance to prevent dirt and moisture ingress
Optional vent gauze feature to prevent moisture condensation
3 sealed cable entry points, two at the base and one in the rear of the enclosure
Positive fibre management to enable the use of both G652D or G657 single mode fibre types
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
Popular items
CCPA-M11AX/BK-0, HellermannTyton Connectivity
The HellermannTyton customer connection point (CCP) is manufactured from VO and UV stable black polycarbonate and has a fully detachable snap on lid. The Customer Connection Point XL/XT is used as a building entry point (BEP) to provide a fibre termination and network demarcation point external to the connected premise in a Fibre to the Home (FTTH) network. It also presents a network test point outside of the customer location.
IP68 sealing on all compression ports gives a high level of performance to prevent dirt and moisture ingress
Bend radius managed through-the wall port with IP55 environmental sealing
Optional vent gauze feature to prevent moisture condensation
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
Popular items
CCPA-M11XXX/BK-0, HellermannTyton Connectivity
The HellermannTyton customer connection point (CCP) The closure is manufactured from V0 and UV stable black polycarbonate and has a fully detachable snap on lid. The closure has 2 separate cable access points which are sealed with a silicon cable entry kit (cable diameter range 4.0 mm to 6.0 mm) to maintain the IP68 rating.
IP68 sealing gives a high level of performance to prevent dirt and moisture ingress
Optional vent gauze feature to prevent moisture condensation
3 sealed cable entry points, two at the base and one in the rear of the enclosure
Positive fibre management to enable the use of both G652D or G657 single mode fibre types
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
Popular items
CCPXX-X1X1XX2LP004/BK, HellermannTyton Connectivity
The HellermannTyton 4 port inline CCPXL is supplied with 1 x LC PC duplex adaptor and 2 x 1m pigtails. Each cable access point is sealed with a cable entry kit to manage cables from 4.0 mm to 6 mm and to maintain the IP68 rating. Internal fibre management features ensure that a 30 mm minimum bend radius is maintained within the closure and provides storage capacity for any excess fibre.
IP68 sealing on all compression ports gives a high level of performance to prevent dirt and moisture ingress
Bend radius managed through-the wall port with IP55 environmental sealing
Optional vent gauze feature to prevent moisture condensation
5 sealed cable entry points, two at the base, two at the top and one in the rear of the enclosure
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
Popular items
FLCXXM3-LCSCDA-03.0M, HellermannTyton Connectivity
The HellermannTyton duplex patch leads are manufactured using 3.0 mm buffered fibre optic cable which is sheathed in LS0H material making them suitable for internal use. HellermannTytons duplex patch leads are manufactured to the highest quality and tested to exceed the latest published version of ISO/IEC 11801 and ANSI/TIA 568. NB.
Simplex and duplex options available
3.0 mm buffered fibre optic cable
Pre tested with test results supplied
Patch leads are packaged individually in bags with test results
Popular items
FLCXXS2-LCSCDY-03.0M, HellermannTyton Connectivity
The HellermannTyton duplex patch leads are manufactured using 3.0 mm buffered fibre optic cable which is sheathed in LS0H material making them suitable for internal use. HellermannTytons duplex patch leads are manufactured to the highest quality and tested to exceed the latest published version of ISO/IEC 11801 and ANSI/TIA 568. NB.
Simplex and duplex options available
3.0 mm buffered fibre optic cable
Pre tested with test results supplied
Patch leads are packaged individually in bags with test results
Popular items
FWOA-SSW22-010/WH, HellermannTyton Connectivity
The HellermannTyton fibre wall outlet is manufactured from ABS plastic and tamper proof latches secure the cover to the base. The Pre-terminated FWO is supplied with a 2 fibre G657.A1 10m cable and is fitted with a 2 x SC PC connector and 2 x SC SX PC adaptors. The pre-terminated adaptor is placed in to the wall outlet and the cable is routed through the rear of the outlet.
Cable entry through base
Install directly on the wall or onto a flush mount back box
accommodates up to 4 splice protectors (up to 45 mm)
Quality surface finish
Tamper proof latches
Positive fibre management to ensure a 30 mm minimum bend radius
New Items
New items
CCE-A1112XXX1/BK, HellermannTyton Connectivity
The HellermannTyton customer connection enclosure (CCE) supports a maximum 2 x SC simplex or LC duplex adaptors. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre.
Maximum capacity is 2 x SC simplex or LC duplex adaptors
Fibre management for 4 x 3A splices
Integral positive fibre management and storage capacity
6 inbound & outbound access points (2 x 6.0 - 8.5 mm and 1 x 2.5 - 6.5 mm)
Through the wall capability
Loop through facility
Tamper proof fitting, captive screw and nut
IP55 rated
New items
FLCXXS2-SCSCDY-05.0M, HellermannTyton Connectivity
The HellermannTyton duplex patch leads are manufactured using 5.0 mm buffered fibre optic cable which is sheathed in LS0H material making them suitable for internal use. HellermannTytons duplex patch leads are manufactured to the highest quality and tested to exceed the latest published version of ISO/IEC 11801 and ANSI/TIA 568. NB.
Simplex and duplex options available
5.0 mm buffered fibre optic cable
Pre tested with test results supplied
Patch leads are packaged individually in bags with test results
New items
FWOA-VVW22-010/WH, HellermannTyton Connectivity
The HellermannTyton fibre wall outlet is manufactured from ABS plastic and tamper proof latches secure the cover to the base. The Pre-terminated FWO is supplied with a 2 fibre G657.A1 10m cable and is fitted with a 2 x SC PC connector and 2 x SC SX PC adaptors. The pre-terminated adaptor is placed in to the wall outlet and the cable is routed through the rear of the outlet.
Cable entry through base
Install directly on the wall or onto a flush-mount back box
accommodates up to 4 splice protectors (up to 45 mm)
Quality surface finish
Tamper proof latches
Positive fibre management to ensure a 30 mm minimum bend radius
New items
HT-POD-25MM-6P, HellermannTyton Connectivity
The HellermannTyton POD box part of the zone cabling product range offers flexibility within a structured cabling network. Each POD is assembled with angled LJ6C adaptors which are compatible with HTC tool free keystone jacks, or GST keystone jacks.
IK07 rated
Assembled with HTC 6C angled adaptors
Compatible with HTC tool free jacks or GST jacks only
Integral anchor point for cable bundles
Port and POD labelling fields
Secure & temporary fixing points
New items
CCE-A11121L11/BK, HellermannTyton Connectivity
The HellermannTyton customer connection enclosure (CCE) is supplied with 1 x LC/PC duplex adaptor and 1 x LC/PC 900μm pigtail 1m. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre.
1 x LC & PC 900μm pigtail
Fibre management for 4 x 3A splices
Integral positive fibre management and storage capacity
6 inbound & outbound access points (2 x 6.0-8.5 mm and 1 x 2.5 - 6.5 mm)
Through the wall capability
Loop through facility
Tamper proof fitting, captive screw and nut
IP55 rated
New items
CCPA-M111LP/BK-0, HellermannTyton Connectivity
The HellermannTyton customer connection point (CCP) is manufactured from VO and UV stable black polycarbonate and has a fully detachable snap on lid. The closure has 2 separate cable access points which are sealed with a silicon cable entry kit to maintain the IP68 rating.
IP68 sealing gives a high level of performance to prevent dirt and moisture ingress
Optional vent gauze feature to prevent moisture condensation
3 sealed cable entry points, two at the base and one in the rear of the enclosure
Positive fibre management to enable the use of both G652D or G657 single mode fibre types
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
New items
CCPA-M11AX/BK-0, HellermannTyton Connectivity
The HellermannTyton customer connection point (CCP) is manufactured from VO and UV stable black polycarbonate and has a fully detachable snap on lid. The Customer Connection Point XL/XT is used as a building entry point (BEP) to provide a fibre termination and network demarcation point external to the connected premise in a Fibre to the Home (FTTH) network. It also presents a network test point outside of the customer location.
IP68 sealing on all compression ports gives a high level of performance to prevent dirt and moisture ingress
Bend radius managed through-the wall port with IP55 environmental sealing
Optional vent gauze feature to prevent moisture condensation
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
New items
CCPA-M11XXX/BK-0, HellermannTyton Connectivity
The HellermannTyton customer connection point (CCP) The closure is manufactured from V0 and UV stable black polycarbonate and has a fully detachable snap on lid. The closure has 2 separate cable access points which are sealed with a silicon cable entry kit (cable diameter range 4.0 mm to 6.0 mm) to maintain the IP68 rating.
IP68 sealing gives a high level of performance to prevent dirt and moisture ingress
Optional vent gauze feature to prevent moisture condensation
3 sealed cable entry points, two at the base and one in the rear of the enclosure
Positive fibre management to enable the use of both G652D or G657 single mode fibre types
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
New items
CCPXX-X1X1XX2LP004/BK, HellermannTyton Connectivity
The HellermannTyton 4 port inline CCPXL is supplied with 1 x LC PC duplex adaptor and 2 x 1m pigtails. Each cable access point is sealed with a cable entry kit to manage cables from 4.0 mm to 6 mm and to maintain the IP68 rating. Internal fibre management features ensure that a 30 mm minimum bend radius is maintained within the closure and provides storage capacity for any excess fibre.
IP68 sealing on all compression ports gives a high level of performance to prevent dirt and moisture ingress
Bend radius managed through-the wall port with IP55 environmental sealing
Optional vent gauze feature to prevent moisture condensation
5 sealed cable entry points, two at the base, two at the top and one in the rear of the enclosure
Minimum fibre bend radius of 30 mm throughout
Mounting for 2 off SC SX or LC DX connections
Splice protector storage for 3A or ANT sleeves
Mechanical fixing for cable strength member
New items
FLCXXM3-LCSCDA-03.0M, HellermannTyton Connectivity
The HellermannTyton duplex patch leads are manufactured using 3.0 mm buffered fibre optic cable which is sheathed in LS0H material making them suitable for internal use. HellermannTytons duplex patch leads are manufactured to the highest quality and tested to exceed the latest published version of ISO/IEC 11801 and ANSI/TIA 568. NB.
Simplex and duplex options available
3.0 mm buffered fibre optic cable
Pre tested with test results supplied
Patch leads are packaged individually in bags with test results
New items
FLCXXS2-LCSCDY-03.0M, HellermannTyton Connectivity
The HellermannTyton duplex patch leads are manufactured using 3.0 mm buffered fibre optic cable which is sheathed in LS0H material making them suitable for internal use. HellermannTytons duplex patch leads are manufactured to the highest quality and tested to exceed the latest published version of ISO/IEC 11801 and ANSI/TIA 568. NB.
Simplex and duplex options available
3.0 mm buffered fibre optic cable
Pre tested with test results supplied
Patch leads are packaged individually in bags with test results
New items
FWOA-SSW22-010/WH, HellermannTyton Connectivity
The HellermannTyton fibre wall outlet is manufactured from ABS plastic and tamper proof latches secure the cover to the base. The Pre-terminated FWO is supplied with a 2 fibre G657.A1 10m cable and is fitted with a 2 x SC PC connector and 2 x SC SX PC adaptors. The pre-terminated adaptor is placed in to the wall outlet and the cable is routed through the rear of the outlet.
Cable entry through base
Install directly on the wall or onto a flush mount back box
accommodates up to 4 splice protectors (up to 45 mm)
Quality surface finish
Tamper proof latches
Positive fibre management to ensure a 30 mm minimum bend radius
Don’t hesitate to ask questions for better clarification.