Featured Products
FCT - Empty Shell D-Sub Crimp Connector A range of Empty Shell D-Sub Crimp Connectors from FCT. FCT- D-Sub Connec...
Plug and Socket Shells Signal contacts with solder bucket terminations Cavities for power/coaxial contacts (available separately) Note...
Nickel-plated Solid metal hoods with short and long jack screws and anti-kink sleeving The two halves of the hood l...
FCT - IDC D-Sub Connector A range of IDC Pin and Socket D-Sub Connectors for ribbon cable with strain-relief spring...
90° Plug & Socket Shells Signal contact terminations set at 90° for PCB mounting (see below) Cavities for power/coa...
Plug and Socket Shells Signal contacts with solder bucket terminations Cavities for power/coaxial contacts (available separately) Note...
FCT - D-Sub Adaptors These Shielded D-Sub Right Angle Adaptors convert Pins to Sockets . The design of these Shield...
FCT - IP67 Waterproof Rear Panel / PCB Mount D-Sub Connector A range of IP67 Waterproof Rear Panel / PCB Mount D-S...
FCT-D-Sub Filtered Plug and Sockets - Solder From FCT, a series professional grade filtered solder pot D-Sub connec...
FMK Series Metal Hoods, Straight and Angled 45° These FMK Series Metal Hood Backshells have a Large Inner Chamber a...
FCT- D-Sub Metal Connector Kits From FCT, a series of D-Sub connector kits with solder contacts. The connector kits...
FCT - Solder Cup D-sub Connector A range of D-Sub Plug and Socket connectors with 20 AWG Solder Pot termination. Th...
Popular Categories For FCT
Popular Items
Popular items
FL09P7-K120, FCT
FCT - Empty Shell D-Sub Crimp Connector
A range of Empty Shell D-Sub Crimp Connectors from FCT.
FCT- D-Sub Connectors
Popular items
FMS002P102 / 1727040128, FCT
Power/Coaxial Contacts
A range of Contacts designed for use in mixed layout Connector shells including Power, Coaxial and High Voltage types.
PCB holes for coax plug and socket: 4 holes 1.3mm dia. on 5.08mm ctrs, plus centre hole 1.3mm dia.
PCB mounting inserts are not suitable for use with right angle PCB connectors.
PCB holes for 20A and 40A PCB contacts are 2.85mm and 3.75mm respectively.
Snap-fit contacts removed with tool, stock no.
485-221
'M' DIN41612 connectors may also be used with mixed layout D shells
50 Ohm Coaxial contacts (straight) accept RG178B/U & RG174A/U cables. Use crimp tool (stock no.
470-099
) for the braid and solder for the centre contact. Contacts removed with tool, stock no.
485-221
Popular items
FAW1PSG1U / 1731140077, FCT
FCT - D-Sub Adaptors
These Shielded D-Sub Right Angle Adaptors convert Pins to Sockets . The design of these Shielded D-Sub Right Angle Adaptors features brass nickel plated 4-40UNC mounting screws on the pin connector face and steel tin plated female 4-40UNC screw locks on the socket connector face.
FCT- D-Sub Connectors
Popular items
FKH3AE / 1727040118, FCT
FCT - D-Sub Hoods
A range of Shielded D-Sub Hoods from FCT.
Features:
812-6318 Snap together Hood size 1
812-6315 Snap together Hood size 2
812-6324 Snap together Hood size 3
812-6321 Snap together Hood size 4
812-6337 Snap together Hood size 5
812-6447 Both Straight and Right Angle exit size 1
812-6440 Both Straight and Right Angle exit size 2
812-6444 Both Straight and Right Angle exit size 3
FCT- D-Sub Connectors
Popular items
FMK2G-15S-5847 / 1731140313, FCT
FCT- D-Sub Metal Connector Kits
From FCT, a series of D-Sub connector kits with solder contacts. The connector kits consist of a diecast zinc lid and matching base. The hoods feature an easy to assemble catch spring system and pre-mounted locking screws. Cable clamps and strain reliefs offer extra cable security. The plug and socket connectors have gold plated machined contacts with 20 AWG solder pot termination. Available in 9, 15 and 25 way male and female kits.
Features and Benefits
Straight cable outlet with strain relief
Easy to assemble catch spring system
Robust diecast Zinc materials
FCT- D-Sub Connectors
Popular items
FWDR25S / 1731100009, FCT
Back panel D-connector, solder tag
These waterproof back panel D-connectors and jacks meet protection rating IP67 and use an O-ring seal to minimise the extent to which the plug connection protrudes from the panel.
Waterproof (IP67) 'D'
Suitable for military, industrial or commercial applications and computer interfacing etc.
Popular items
FME001S102 / 1731120194, FCT
Coax, power and high-voltage contacts
A range of Coax, power and high-voltage contacts from FCT.
Power and coax contacts matching D hybrid contact plug housings
Contacts snap into housing
Can be removed using the ejection tool
Power contacts have soldered terminals
Coax contacts (straight type) accept RG178B/U and RG174A/U cables with crimping and soldered terminals
For use with crimping tool (see DIN41612 plug, type "M")
High-voltage contacts available for connecting voltages up to 3 kW
Mixed Contact 'D'
Mixed contact connectors suitable for making combined signal and power connections. Plug and socket options with solder bucket or 90° PCB terminations. Shell definition: 17W2 shell can have 17 mixed contacts in total. Shell is supplied with 15 signal contacts and has 2 cavities for power or coaxial contacts. Suitable for military, industrial or commercial applications and computer interfacing etc
Warning
Description "pin" or "jack" refers to the middle contact in each case
Popular items
FMK2G-15S-5847, FCT
FCT- D-Sub Metal Connector Kits
From FCT, a series of D-Sub connector kits with solder contacts. The connector kits consist of a diecast zinc lid and matching base. The hoods feature an easy to assemble catch spring system and pre-mounted locking screws. Cable clamps and strain reliefs offer extra cable security. The plug and socket connectors have gold plated machined contacts with 20 AWG solder pot termination. Available in 9, 15 and 25 way male and female kits.
Features and Benefits
Straight cable outlet with strain relief
Easy to assemble catch spring system
Robust diecast Zinc materials
FCT- D-Sub Connectors
Popular items
F15S0G2 / 1727040168, FCT
FCT - Solder Cup D-sub Connector
A range of D-Sub Plug and Socket connectors with 20 AWG Solder Pot termination. These D-Sub Plug and Socket connectors have gold plated machined contacts with a performance class 2 (200 cycles). Shell material is Tin plated steel with the mounting holes having a diameter of 3.1 mm and the Insert material is white Polyester UL 94 V-0 rated for these D-Sub Plug and Socket connectors.
For Hoods see stock number
812-6245
typical.
FCT- D-Sub Connectors
Popular items
FMK3G-25S-5847, FCT
FCT- D-Sub Metal Connector Kits
From FCT, a series of D-Sub connector kits with solder contacts. The connector kits consist of a diecast zinc lid and matching base. The hoods feature an easy to assemble catch spring system and pre-mounted locking screws. Cable clamps and strain reliefs offer extra cable security. The plug and socket connectors have gold plated machined contacts with 20 AWG solder pot termination. Available in 9, 15 and 25 way male and female kits.
Features and Benefits
Straight cable outlet with strain relief
Easy to assemble catch spring system
Robust diecast Zinc materials
FCT- D-Sub Connectors
Popular items
F25P-K700, FCT
Plug & Socket (for cable mounting)
Solder bucket 'D' plugs and sockets to be used as part of a waterproof cable connection in conjunction with the plastic and metallised hoods (stock no. 195-7187). These may then mate with the panel mounted D plugs and sockets (stock no. 195-7250) or with each other as part of an in-line cable assembly, using the relevant in-line adaptor kit (stock no. 246-6064 to stock no. 246-6086) to maintain IP67 rating.
Waterproof (IP67) 'D'
Suitable for military, industrial or commercial applications and computer interfacing etc.
Popular items
F25P15-K49, FCT
FCT - IDC D-Sub Connector
A range of IDC Pin and Socket D-Sub Connectors for ribbon cable with strain-relief spring. Suitable cable size is 28 AWG 0.08 mm² 1.27 mm pitch for these IDC Pin and Socket D-Sub Connectors. The contacts of these IDC Pin and Socket D-Sub Connectors have 0.2 μm thick gold plating. Shell material is Tin plated steel with the mounting holes having a diameter of 3.1 mm and the Insert material is black Polyester UL 94 V-0 rated for these IDC D-Sub Pin and Socket connectors.
FCT- D-Sub Connectors
New Items
New items
FL25P7-K120, FCT
FCT - Empty Shell D-Sub Crimp Connector
A range of Empty Shell D-Sub Crimp Connectors from FCT.
FCT- D-Sub Connectors
New items
FM21WA4P-K120, FCT
Plug and Socket Shells
Signal contacts with solder bucket terminations
Cavities for power/coaxial contacts (available separately)
Note
Panel mounting dimensions are as the equivalent standard D connector shell size.
Mixed Contact 'D'
Mixed contact connectors suitable for making combined signal and power connections. Plug and socket options with solder bucket or 90° PCB terminations. Shell definition: 17W2 shell can have 17 mixed contacts in total. Shell is supplied with 15 signal contacts and has 2 cavities for power or coaxial contacts. Suitable for military, industrial or commercial applications and computer interfacing etc
New items
FMH2-4381 / 1731110500, FCT
Nickel-plated
Solid metal hoods with short and long jack screws and anti-kink sleeving
The two halves of the hood lock into one another
Jack screws can be retrofitted
Option of fitting hoods universally using locking mechanisms (
100–7490
)
Ø 6.5 cable — 14 mm for flat cable and round-flat cable
New items
F25S15-K49 / 1727040068, FCT
FCT - IDC D-Sub Connector
A range of IDC Pin and Socket D-Sub Connectors for ribbon cable with strain-relief spring. Suitable cable size is 28 AWG 0.08 mm² 1.27 mm pitch for these IDC Pin and Socket D-Sub Connectors. The contacts of these IDC Pin and Socket D-Sub Connectors have 0.2 μm thick gold plating. Shell material is Tin plated steel with the mounting holes having a diameter of 3.1 mm and the Insert material is black Polyester UL 94 V-0 rated for these IDC D-Sub Pin and Socket connectors.
FCT- D-Sub Connectors
New items
FM9W4S5-K121 / 1731070630, FCT
90° Plug & Socket Shells
Signal contact terminations set at 90° for PCB mounting (see below)
Cavities for power/coaxial contacts (available separately)
Note
Panel mounting dimensions are as the equivalent standard D connector shell size. PCB coaxial inserts are not suitable
Mixed Contact 'D'
Mixed contact connectors suitable for making combined signal and power connections. Plug and socket options with solder bucket or 90° PCB terminations. Shell definition: 17W2 shell can have 17 mixed contacts in total. Shell is supplied with 15 signal contacts and has 2 cavities for power or coaxial contacts. Suitable for military, industrial or commercial applications and computer interfacing etc
New items
FM5W5S-K121 / 1727040034, FCT
Plug and Socket Shells
Signal contacts with solder bucket terminations
Cavities for power/coaxial contacts (available separately)
Note
Panel mounting dimensions are as the equivalent standard D connector shell size.
Mixed Contact 'D'
Mixed contact connectors suitable for making combined signal and power connections. Plug and socket options with solder bucket or 90° PCB terminations. Shell definition: 17W2 shell can have 17 mixed contacts in total. Shell is supplied with 15 signal contacts and has 2 cavities for power or coaxial contacts. Suitable for military, industrial or commercial applications and computer interfacing etc
New items
FAW2PSG1U, FCT
FCT - D-Sub Adaptors
These Shielded D-Sub Right Angle Adaptors convert Pins to Sockets . The design of these Shielded D-Sub Right Angle Adaptors features brass nickel plated 4-40UNC mounting screws on the pin connector face and steel tin plated female 4-40UNC screw locks on the socket connector face.
FCT- D-Sub Connectors
New items
FWDR25S25A / 1727040056, FCT
FCT - IP67 Waterproof Rear Panel / PCB Mount D-Sub Connector
A range of IP67 Waterproof Rear Panel / PCB Mount D-Sub Connectors from FCT.
FCT- D-Sub Connectors
New items
FC25P0G1, FCT
FCT-D-Sub Filtered Plug and Sockets - Solder
From FCT, a series professional grade filtered solder pot D-Sub connectors. The plug and socket connectors have tin plated steel shells with 3.1 mm fixing centres and 2.84 mm contact pitch. Signal contacts suitable for 20 AWG wire. Available in 9, 15 and 25 way plugs and sockets.
Features and Benefits
Tin plated steel shells (with dimples for higher frequencies- male connectors only)
Fully compatible with standard D-Sub connectors
Space saving
FCT- D-Sub Connectors
New items
FMK1G / 1727040096, FCT
FMK Series Metal Hoods, Straight and Angled 45°
These FMK Series Metal Hood Backshells have a Large Inner Chamber and an Angled or Straight Cable Outlet. This large amount of internal space is particularly suitable for D-sub connectors with special contacts. The design of the FMK Series Metal Hood Backshell includes strain relief on the cable outlet. The FMK Series Metal Hood Backshell is easy to assemble thanks to the catch spring system and pre-mounted locking screws. The FMK Series Metal Hood Backshells can be used with engagement hooks and locking or knurled screws.
FMKx: Angled
FMKx
G
: Straight
FMKxx-
K201
: Large Cable Outlet
FMKx-
4881
: Dual Cable Outlet
Note
Stock number
764-9668
has dual cable (Ø8 → 12 mm) entry slot
Approvals
UL E168813
Warning
Stock no.
291-6288
is supplied without anti-kink feature
New items
FMK2G-15S-5847, FCT
FCT- D-Sub Metal Connector Kits
From FCT, a series of D-Sub connector kits with solder contacts. The connector kits consist of a diecast zinc lid and matching base. The hoods feature an easy to assemble catch spring system and pre-mounted locking screws. Cable clamps and strain reliefs offer extra cable security. The plug and socket connectors have gold plated machined contacts with 20 AWG solder pot termination. Available in 9, 15 and 25 way male and female kits.
Features and Benefits
Straight cable outlet with strain relief
Easy to assemble catch spring system
Robust diecast Zinc materials
FCT- D-Sub Connectors
New items
F15S0G2 / 1727040168, FCT
FCT - Solder Cup D-sub Connector
A range of D-Sub Plug and Socket connectors with 20 AWG Solder Pot termination. These D-Sub Plug and Socket connectors have gold plated machined contacts with a performance class 2 (200 cycles). Shell material is Tin plated steel with the mounting holes having a diameter of 3.1 mm and the Insert material is white Polyester UL 94 V-0 rated for these D-Sub Plug and Socket connectors.
For Hoods see stock number
812-6245
typical.
FCT- D-Sub Connectors
Don’t hesitate to ask questions for better clarification.