Featured Products
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requ...
G 1/2 Mist-X25 Coalescing Silencer Filter rating 1μm Typical operating temperature range 2°C to 50°C (36°F...
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requ...
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series Main airline filtration for pipe sizes 1/4 in to 1in Suitable fo...
Domnick Hunter Compressed Air Filter Element The Domnick Hunter compressed air filter element is used for removing oil, particles and moisture be...
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requirements for compressed air quality I...
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requirements for compressed air quality Im...
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series Main airline filtration for...
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requ...
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requ...
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series Main airline filtration for...
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA Meets and exceeds requirements for compressed air quality I...
Popular Categories For Domnick Hunter
Categories For Domnick Hunter
Popular Items
Popular items
FXKE3, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Popular items
MIST-X25, Domnick Hunter
G 1/2 Mist-X25 Coalescing Silencer
Filter rating 1μm
Typical operating temperature range 2°C to 50°C (36°F to 122°F)
Typical back pressure at full rated flow 870mbar (12.6 psi)
Max. flow rate at 7 bar g (100 psi g) = 25l/s, 53scfm
Popular items
010AA, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Popular items
K009AA, Domnick Hunter
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series
Main airline filtration for pipe sizes 1/4 in to 1in
Suitable for all types of compressor
Compatible with all compressor oils
Complete with high efficiency general purpose element (grade AO) or high efficiency oil removal element (grade AA)
Operating temperature range +1.5°C to +66°C
Corrosion protected inside and out with Alocram treatment and epoxy paint finish
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Popular items
P010AA, Domnick Hunter
Domnick Hunter Compressed Air Filter Element
The Domnick Hunter compressed air filter element is used for removing oil, particles and moisture before it can come in contact with the desiccant in the dryer and ruin it. It provides the highest level of clean compressed air with a minimum loss of pressure.
Features and Benefits
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Certifications
ISO 8573.1
ANSI
Popular items
030AA, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Popular items
P020AA, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Popular items
K017AA, Domnick Hunter
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series
Main airline filtration for pipe sizes 1/4 in to 1in
Suitable for all types of compressor
Compatible with all compressor oils
Complete with high efficiency general purpose element (grade AO) or high efficiency oil removal element (grade AA)
Operating temperature range +1.5°C to +66°C
Corrosion protected inside and out with Alocram treatment and epoxy paint finish
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Popular items
AO30EBFX, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Popular items
AO020CBFX, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Popular items
K017AO, Domnick Hunter
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series
Main airline filtration for pipe sizes 1/4 in to 1in
Suitable for all types of compressor
Compatible with all compressor oils
Complete with high efficiency general purpose element (grade AO) or high efficiency oil removal element (grade AA)
Operating temperature range +1.5°C to +66°C
Corrosion protected inside and out with Alocram treatment and epoxy paint finish
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Popular items
010AO, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New Items
New items
FXKE3, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New items
MIST-X25, Domnick Hunter
G 1/2 Mist-X25 Coalescing Silencer
Filter rating 1μm
Typical operating temperature range 2°C to 50°C (36°F to 122°F)
Typical back pressure at full rated flow 870mbar (12.6 psi)
Max. flow rate at 7 bar g (100 psi g) = 25l/s, 53scfm
New items
010AA, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New items
K009AA, Domnick Hunter
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series
Main airline filtration for pipe sizes 1/4 in to 1in
Suitable for all types of compressor
Compatible with all compressor oils
Complete with high efficiency general purpose element (grade AO) or high efficiency oil removal element (grade AA)
Operating temperature range +1.5°C to +66°C
Corrosion protected inside and out with Alocram treatment and epoxy paint finish
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New items
P010AA, Domnick Hunter
Domnick Hunter Compressed Air Filter Element
The Domnick Hunter compressed air filter element is used for removing oil, particles and moisture before it can come in contact with the desiccant in the dryer and ruin it. It provides the highest level of clean compressed air with a minimum loss of pressure.
Features and Benefits
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Certifications
ISO 8573.1
ANSI
New items
030AA, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New items
K017AA, Domnick Hunter
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series
Main airline filtration for pipe sizes 1/4 in to 1in
Suitable for all types of compressor
Compatible with all compressor oils
Complete with high efficiency general purpose element (grade AO) or high efficiency oil removal element (grade AA)
Operating temperature range +1.5°C to +66°C
Corrosion protected inside and out with Alocram treatment and epoxy paint finish
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New items
P020AA, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
New items
AO30EBFX, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New items
AO020CBFX, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New items
K017AO, Domnick Hunter
General Purpose/High Efficiency Filter G 1/4 - G1 Grade AO/AA Oil-X Plus Series
Main airline filtration for pipe sizes 1/4 in to 1in
Suitable for all types of compressor
Compatible with all compressor oils
Complete with high efficiency general purpose element (grade AO) or high efficiency oil removal element (grade AA)
Operating temperature range +1.5°C to +66°C
Corrosion protected inside and out with Alocram treatment and epoxy paint finish
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
New items
015AO, Domnick Hunter
Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA
Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets
Technical Specification - Filter units
Max. Operating Pressure
16 bar (232 psi)
Max. Operating Temperature
80°C (176°F)
Min. Operating Temperature
1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m
3
or 0.01 ppm(w) at 21°C
Standards
ISO 8573.1
Supplied with
AO or AA grade Filter as appropriate
Key Characteristics
QUALITY
DIRT
WATER
OIL
CLASS
Particle size
Pressure Dewpoint °C
(Including vapour)
in μm
(ppm. vol) at 7 bar g (100 psi g)
mg/m
3
1
0.1
-70 (0.3)
0.01
2
1
-40 (16)
0.1
3
5
-20 (128)
1.0
4
15
+3 (940)
5
5
40
+7 (1240)
25
6
-
+10 (1500)
-
Don’t hesitate to ask questions for better clarification.