Arrow Electronics

Arrow SmartEverything IoT Development Board with SIGFOX The Arrow SmartEverything Development Board is a flexible Arduino form-factor prototyping platform for Internet-of-Things (IoT) and M2M applications. SmartEverything combines SIGFOX, Bluetooth and Near-Field Communication (NFC) wireless technologies with GPS and a suite of embedded sensors. Atmel’s SAM D21 ultra low-power ARM® Cortex®-M0+ Microcontroller is used to integrate the featured devices. SIGFOX connectivity is a particular highlight; the embedded Telit LE51-868 S Wireless Module gives design engineers access to the rapidly expanding SIGFOX cellular wireless network. Across the world millions of IoT devices already utilise the low-power connectivity SIGFOX provides. For SIGFOX network details please visit http://www.sigfox.com/en/#!/connected-world . Key Features • 12 months of SIGFOX network access included • Features 3 wireless technologies – SIGFOX, Bluetooth and Near Field Communication (NFC) • Arduino form-factor • Fully supported by Arduino IDE • Comprehensive sensor suite including a 9-axis Inertial Measurement Unit (IMU) • GPS Module with embedded antenna • Flexible power supply options – Can be powered by USB, Battery or separate Power Supply • SWD Connector – Allows programming and debugging with SAM-ICE and ATMEL-ICE • Pushbuttons • RGB LED • Dimensions - 53.34 x 68.58 mm Featured Devices • Microcontroller - Atmel SAM D21 32-bit ultra low-power ARM® Cortex®-M0+ MCU • SIGFOX - Telit LE51-868 S SIGFOX 868 MHz Wireless Module • Bluetooth - TDK SESUB-PAN-T2541 Bluetooth Low Energy 4.0 Module based on TI’s CC2541 BTLE System-on-Chip (SoC) • Near Field Communication - NXP NT3H1101FHK NFC Interface IC, separate NFC Antenna included • GPS/GNSS - Telit Jupiter SE868-A GPS/GNSS Module with Integrated Antenna, supports GPS, QZSS, GLONASS and is Galileo ready • 9-Axis Sensing - ST LSM9...

ARIS EDGE board, developed by RELOC for Arrow Electronics, is a ready-to-use Internet of Things (IoT) hardware and software platform that enables users to get their IoT applications up and running quickly, exploiting the Renesas Synergy development framework. Based on Renesas Synergy S1 MCU, the ARIS EDGE board has a host of features that equip it for smart sensing and IoT operations. Multi-protocol module supporting BLE, Thread and ZigBee stacks High performance MEMS 9-degrees-of-freedom IMU with sensor fusion capabilities. Up to 32-MHz core clock 128 kB code flash 16 kB SRAM micro-USB connector providing access to the native S1 USB peripheral Ambient light sensor

Arrow SmartEverything IoT Development Board with SIGFOX The Arrow SmartEverything Development Board is a flexible Arduino form-factor prototyping platform for Internet-of-Things (IoT) and M2M applications. SmartEverything combines SIGFOX, Bluetooth and Near-Field Communication (NFC) wireless technologies with GPS and a suite of embedded sensors. Atmel’s SAM D21 ultra low-power ARM® Cortex®-M0+ Microcontroller is used to integrate the featured devices. SIGFOX connectivity is a particular highlight; the embedded Telit LE51-868 S Wireless Module gives design engineers access to the rapidly expanding SIGFOX cellular wireless network. Across the world millions of IoT devices already utilise the low-power connectivity SIGFOX provides. For SIGFOX network details please visit http://www.sigfox.com/en/#!/connected-world . Key Features • 12 months of SIGFOX network access included • Features 3 wireless technologies – SIGFOX, Bluetooth and Near Field Communication (NFC) • Arduino form-factor • Fully supported by Arduino IDE • Comprehensive sensor suite including a 9-axis Inertial Measurement Unit (IMU) • GPS Module with embedded antenna • Flexible power supply options – Can be powered by USB, Battery or separate Power Supply • SWD Connector – Allows programming and debugging with SAM-ICE and ATMEL-ICE • Pushbuttons • RGB LED • Dimensions - 53.34 x 68.58 mm Featured Devices • Microcontroller - Atmel SAM D21 32-bit ultra low-power ARM® Cortex®-M0+ MCU • SIGFOX - Telit LE51-868 S SIGFOX 868 MHz Wireless Module • Bluetooth - TDK SESUB-PAN-T2541 Bluetooth Low Energy 4.0 Module based on TI’s CC2541 BTLE System-on-Chip (SoC) • Near Field Communication - NXP NT3H1101FHK NFC Interface IC, separate NFC Antenna included • GPS/GNSS - Telit Jupiter SE868-A GPS/GNSS Module with Integrated Antenna, supports GPS, QZSS, GLONASS and is Galileo ready • 9-Axis Sensing - ST LSM9...

ARIS EDGE board, developed by RELOC for Arrow Electronics, is a ready-to-use Internet of Things (IoT) hardware and software platform that enables users to get their IoT applications up and running quickly, exploiting the Renesas Synergy development framework. Based on Renesas Synergy S1 MCU, the ARIS EDGE board has a host of features that equip it for smart sensing and IoT operations. Multi-protocol module supporting BLE, Thread and ZigBee stacks High performance MEMS 9-degrees-of-freedom IMU with sensor fusion capabilities. Up to 32-MHz core clock 128 kB code flash 16 kB SRAM micro-USB connector providing access to the native S1 USB peripheral Ambient light sensor