Featured Products
Apem 10mm Snap-In Panel Mount LED Indicators - QS Series Apem QS series snap-in panel mount LED indicators...
Toggle Switches 5000 series - Epoxy Sealed Terminals Momentary function (spring-loaded return): The switch or contact breaker returns to its...
Apem IM Series Push Button Switches IM series sealed push button switches from Apem have an audible click w...
KR Series Rocker Actuators A wide variety of actuator colours and markings, suitable for use with KR series switch cases (see typically 507-536...
The APEM PHAP5-30 tact switches are 3.6 x 6 mm standard package having normally open (NO) contacts. These switches are either right angle or vert...
Apem 10mm Snap-In Panel Mount LED Indicators - QS Series Apem QS series snap-in panel mount LED indicators with a coloured diffused flat lens, f...
AO1 Series Switches - 16mm Operators Modular construction illuminated and non illuminated Pushbutton, Keylo...
KR Rocker Cases - Double Pole Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminals Available in n...
Designed for harsh environments, KH series rocker switches are protected against accidental actuation with a protection guard. Featuring front pa...
These switches are part of the PBA series including models with dia. 16, 19 or 22 mm bushing. Easy to clean metal surface, long life (50 million...
Popular Categories For Apem
Categories For Apem
Popular Items
Popular items
QS101XXHY110, Apem
Apem 10mm Snap-In Panel Mount LED Indicators - QS Series
Apem QS series snap-in panel mount LED indicators with a coloured diffused flat lens, for typical replacement of filament and neon indicators. Applications include domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets and battery chargers/power supplies.
10mm panel cut-out size (tolerance +0.1 and -0.05mm)
Front panel snap-in mounting requires no additional hardware
Coloured diffused flat lenses
Available colours: red, green, yellow, blue, orange, white (clear), tri-colour and flashing red
Voltage range: 2Vdc - 220Vac
Terminations: solder lug/faston, 10mm (2.0 x 0.5mm) or wires (200mm)
Standard intensity diffused LEDs or high brightness LEDs for daylight viewing
UL496 recognised
Popular items
5232YCDB, APEM
Toggle Switches 5000 series - Epoxy Sealed Terminals
Momentary function
(spring-loaded return):
The switch or contact breaker returns to its original position when the load is removed. E.g. bell push)
Stay-put function
:
The switch or contact breaker remains (stop) in the new position after the load has been removed.
Popular items
IMR7Z412UL, Apem
Apem IM Series Push Button Switches
IM series sealed push button switches from Apem have an audible click when operated making them ideal for harsh and noisy environments. The switches are available in two button styles; flat or domed, the flat being suitable for optional marking.
Snap action with tactile feedback
Sealed to IP67
Gold plated silver contacts
3 A @ 28 V dc contact rating
Shock resistance: 50g - 11 ms according to IEC 68-2-27
2.8 mm faston / solder terminals
Operating life in excess of one million cycles
Popular items
KRR22NXXXX97, Apem
KR Series Rocker Actuators
A wide variety of actuator colours and markings, suitable for use with KR series switch cases (see typically
507-536
,
507-429
etc)
Most symbols meet ISO 7000 standard "graphical symbols for use on equipments"
See also actuator removal tool
507-312
Actuator material ABS
IP68 Modular KR Series
Popular items
PHAP5-30VA2B2S2N4, APEM
The APEM PHAP5-30 tact switches are 3.6 x 6 mm standard package having normally open (NO) contacts. These switches are either right angle or vertical PCB mounted. They have current rating of 50 mA and operates at voltage rating of 12 Vdc maximum, with an operating force of 1.6 N or 2.6 N.
Compact size
Square or round caps
Positive tactile feed back
Bag, tube, tape and reel packaging
SMT soldering
Popular items
QS103XXR12, Apem
Apem 10mm Snap-In Panel Mount LED Indicators - QS Series
Apem QS series snap-in panel mount LED indicators with a coloured diffused flat lens, for typical replacement of filament and neon indicators. Applications include domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets and battery chargers/power supplies.
10mm panel cut-out size (tolerance +0.1 and -0.05mm)
Front panel snap-in mounting requires no additional hardware
Coloured diffused flat lenses
Available colours: red, green, yellow, blue, orange, white (clear), tri-colour and flashing red
Voltage range: 2Vdc - 220Vac
Terminations: solder lug/faston, 10mm (2.0 x 0.5mm) or wires (200mm)
Standard intensity diffused LEDs or high brightness LEDs for daylight viewing
UL496 recognised
Popular items
A0109Y, APEM
AO1 Series Switches - 16mm Operators
Modular construction illuminated and non illuminated Pushbutton, Keylock, Rotary and Emergency Stop switches to fit industry standard 16mm diameter cut-outs. Round, square and rectangular operators can be fitted to single, double, three and four pole switch blocks for a variety of applications. A complete Pushbutton switch assembly requires an operator, switch block, lens and lamp (if illuminated). Keylock and Rotary switches require an operator and switch block, while the Emergency Stop switch comes as a complete assembly supplied with a double pole N/C switch block and a yellow self adhesive label.
Panel sealing to IP65
Gold plated silver contacts
Pushbuttons illuminated with T1 midget groove filament lamp or LED
Keylocks supplied with 2 keys
Rotary lever switches
219-5784
&
219-5762
feature CW lever rotation, all others are CCW lever rotation
For switch blocks & lenses see stk nos
219-5829
&
239-3483
typically
Selection of accessories includes flipguards, flush mounting bezels, PCB sockets and installation tools, see stk nos
278-1262
,
325-2800
,
325-2816
&
241-5757
typically
Note
Single and double pole PCB socket accessories are suitable for illuminated pushbuttons only.
Approvals
BEAB, VDE, UL & CSA (Emergency Stop, VDE, UL & CSA only)
Popular items
TSAA1P02A, APEM
The APEM TS series has proportional miniature thumb controls with non-contacting hall effect technology.
One or two axis
Analog, PWM or USB outputs
IP67 Above panel sealing mounting
Rear or drop in mounting
Pushbutton option
Popular items
IZPR1S422L0G, APEM
The APEM pushbutton switches with curved actuator are made up of polyamide or a metal case. This pushbutton switches are available with latching action models which perform OFF to ON operation. This switch offers an excellent vibration resistance at 10 to 500 Hz.
Easy installation
Flat actuator for optional marking
200000 cycles low level or mechanical life
0.7 Nm maximum torque applied to nut
Popular items
IZPR3S422L0B, APEM
The APEM pushbutton switches with curved actuator are made up of polyamide or a metal case. This pushbutton switches are available with momentary switch operation. LED colour is indicated by the bottom of the switch. This switch offers an excellent vibration resistance at 10 to 500 Hz.
Easy installation
Fixed or variable panel thickness
Screw version available up to 4 A
500000 cycles electrical life at full load
Popular items
PHAP5-30RA2W3T2N2, APEM
The APEM PHAP5-30 tact switches are 3.6 x 6 mm standard package having normally open (NO) contacts. These switches are either right angle or vertical PCB mounted. They have current rating of 50 mA and operates at voltage rating of 12 Vdc maximum, with an operating force of 1.6 N or 2.6 N.
Compact size
Square or round caps
Positive tactile feed back
Bag, tube, tape and reel packaging
SMT soldering
Popular items
PHAP5-30VA2A3T2N2, APEM
The APEM PHAP5-30 tact switches are 3.6 x 6 mm standard package having normally open (NO) contacts. These switches are either right angle or vertical PCB mounted. They have current rating of 50 mA and operates at voltage rating of 12 Vdc maximum, with an operating force of 1.6 N or 2.6 N.
Compact size
Square or round caps
Positive tactile feed back
Bag, tube, tape and reel packaging
SMT soldering
New Items
New items
QS101XXHY110, Apem
Apem 10mm Snap-In Panel Mount LED Indicators - QS Series
Apem QS series snap-in panel mount LED indicators with a coloured diffused flat lens, for typical replacement of filament and neon indicators. Applications include domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets and battery chargers/power supplies.
10mm panel cut-out size (tolerance +0.1 and -0.05mm)
Front panel snap-in mounting requires no additional hardware
Coloured diffused flat lenses
Available colours: red, green, yellow, blue, orange, white (clear), tri-colour and flashing red
Voltage range: 2Vdc - 220Vac
Terminations: solder lug/faston, 10mm (2.0 x 0.5mm) or wires (200mm)
Standard intensity diffused LEDs or high brightness LEDs for daylight viewing
UL496 recognised
New items
5232YCDB, APEM
Toggle Switches 5000 series - Epoxy Sealed Terminals
Momentary function
(spring-loaded return):
The switch or contact breaker returns to its original position when the load is removed. E.g. bell push)
Stay-put function
:
The switch or contact breaker remains (stop) in the new position after the load has been removed.
New items
IMR7Z412UL, Apem
Apem IM Series Push Button Switches
IM series sealed push button switches from Apem have an audible click when operated making them ideal for harsh and noisy environments. The switches are available in two button styles; flat or domed, the flat being suitable for optional marking.
Snap action with tactile feedback
Sealed to IP67
Gold plated silver contacts
3 A @ 28 V dc contact rating
Shock resistance: 50g - 11 ms according to IEC 68-2-27
2.8 mm faston / solder terminals
Operating life in excess of one million cycles
New items
KRR22NXXXX97, Apem
KR Series Rocker Actuators
A wide variety of actuator colours and markings, suitable for use with KR series switch cases (see typically
507-536
,
507-429
etc)
Most symbols meet ISO 7000 standard "graphical symbols for use on equipments"
See also actuator removal tool
507-312
Actuator material ABS
IP68 Modular KR Series
New items
PHAP5-30VA2B2S2N4, APEM
The APEM PHAP5-30 tact switches are 3.6 x 6 mm standard package having normally open (NO) contacts. These switches are either right angle or vertical PCB mounted. They have current rating of 50 mA and operates at voltage rating of 12 Vdc maximum, with an operating force of 1.6 N or 2.6 N.
Compact size
Square or round caps
Positive tactile feed back
Bag, tube, tape and reel packaging
SMT soldering
New items
QS103XXR12, Apem
Apem 10mm Snap-In Panel Mount LED Indicators - QS Series
Apem QS series snap-in panel mount LED indicators with a coloured diffused flat lens, for typical replacement of filament and neon indicators. Applications include domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets and battery chargers/power supplies.
10mm panel cut-out size (tolerance +0.1 and -0.05mm)
Front panel snap-in mounting requires no additional hardware
Coloured diffused flat lenses
Available colours: red, green, yellow, blue, orange, white (clear), tri-colour and flashing red
Voltage range: 2Vdc - 220Vac
Terminations: solder lug/faston, 10mm (2.0 x 0.5mm) or wires (200mm)
Standard intensity diffused LEDs or high brightness LEDs for daylight viewing
UL496 recognised
New items
A0109Y, APEM
AO1 Series Switches - 16mm Operators
Modular construction illuminated and non illuminated Pushbutton, Keylock, Rotary and Emergency Stop switches to fit industry standard 16mm diameter cut-outs. Round, square and rectangular operators can be fitted to single, double, three and four pole switch blocks for a variety of applications. A complete Pushbutton switch assembly requires an operator, switch block, lens and lamp (if illuminated). Keylock and Rotary switches require an operator and switch block, while the Emergency Stop switch comes as a complete assembly supplied with a double pole N/C switch block and a yellow self adhesive label.
Panel sealing to IP65
Gold plated silver contacts
Pushbuttons illuminated with T1 midget groove filament lamp or LED
Keylocks supplied with 2 keys
Rotary lever switches
219-5784
&
219-5762
feature CW lever rotation, all others are CCW lever rotation
For switch blocks & lenses see stk nos
219-5829
&
239-3483
typically
Selection of accessories includes flipguards, flush mounting bezels, PCB sockets and installation tools, see stk nos
278-1262
,
325-2800
,
325-2816
&
241-5757
typically
Note
Single and double pole PCB socket accessories are suitable for illuminated pushbuttons only.
Approvals
BEAB, VDE, UL & CSA (Emergency Stop, VDE, UL & CSA only)
New items
KR45CAKFFG, Apem
KR Rocker Cases - Double Pole
Double pole 10A/24Vdc 'snap-in' rocker switch cases, fitted with 6.35x0.8mm quick connect terminals
Available in non illuminated or LED illuminated versions (with 12V or 24V red, green or amber single or twin LED's)
A large variety of switch configurations and actuator colours/markings available
Suitable actuators should be ordered separately (see typically
507-267
and range)
To facilitate wiring harness preparation and quick panel assembly, all double pole switch cases can also be used with rear crimp connector housing
507-576
, accepting up to 10 crimps terminals (except for
507-431
, which can be used with connector housing
507-560
)
Other accessories include switch case housings
507-611
&
507-615
, panel blanking plugs
507-318
and actuator removal tool
507-312
Switch case panel knockout 36.80x21.08mm
Operating Temperature -40 to +85 °C
Contact Resistance 10 mΩ
Dielectric Strength 2,000 Vrms 50 Hz min. between terminals
IP68 Modular KR Series
New items
KH147AAXXG12N09XX10, APEM
Designed for harsh environments, KH series rocker switches are protected against accidental actuation with a protection guard. Featuring front panel sealing as standard, the KH series is the most robust product of the K range. Due to its panel seal, this series is perfectly adapted to the harshest environments (high pressure cleaners, dust, salt spray…). The KH series is available illuminated and non-illuminated, with numerous symbols and rocker colours, to meet customer requirements at best.
Protected against accidental actuation
Wide choice of colours
Laser etched or pad printed symbols
Illuminated or non-illuminated
New items
New items
New items
PBAR1AFB000MX, APEM
These switches are part of the PBA series including models with dia. 16, 19 or 22 mm bushing. Easy to clean metal surface, long life (50 million cycles), ring or dot illumination.
PBA series ATEX approved piezo switches
Easy to clean metal surface
Long life
Illuminated models
Don’t hesitate to ask questions for better clarification.