Featured Products
3M WS ALERT XPI Headset With the WS™ ALERT™ XPI Headset turn your hearing protector headset into a communications centre. Connect one or two devi...
G3000 Peak/No Peak Safety Helmet Designed and manufactured in Sweden, the G3000 from Peltor has been develo...
Optime I Neckband Ear Defenders Replaces Peltor H6 and H9 with improved features.,Neckband...
4800AF Clear Goggles Panoramic vision lens Anti-mist Fits over spectacles Standards...
X4 Ear Defender, 32 dB The 3M™ Peltor™ X4 Ear Defender with new specially formulated damping pads with inno...
LED Light Vision Spectacles Safety spectacle equipped with 2 adjustable ultra-bright LED Over 50 hours batt...
X3 Ear Defender, 33 dB The 3M™ Peltor™ X3 Ear Defenders are designed to offer protection against high noise...
Optime III Neckband Ear Defenders Replaces Peltor H10 with improved features.,Neckband For independent use in combination with headwear such as...
X2 Ear Defender, 31 dB The 3M™ Peltor™ X2 Ear Defenders are designed to offer protection against moderate t...
3M Peltor LiteCom™ Plus Headset High-Performance Dynamic Microphone Rugged Design Hands Free Use Features & Benefits Typical Applications FAQs A...
WS Alert XP Ear Defender Ear defenders with built in FM Radio reciever, bluetooth and level dependent funti...
Helmet Mounting Posts Mounting posts to attach multi visors to helmets with side slots. 2 posts per bag....
Popular Categories For 3M PELTOR
Popular Items
Popular items
MRX21A3WS6, 3M PELTOR
3M WS ALERT XPI Headset
With the WS™ ALERT™ XPI Headset turn your hearing protector headset into a communications centre. Connect one or two devices via Bluetooth Multipoint technology and converse in normal volume even in noisy environments with the noise-cancelling microphone.
Features and Benefits
Stay protected whilst taking calls wirelessly or listening to the radio even in noisy environments
Level-dependent function for ambient listening to help improve your situational awareness (limited to 82 dB)
Bluetooth® Multi Point Technology for connection to one or two external devices for hands-free talk and streaming
Push-to-Listen feature to easily and instantaneously listen to your surroundings
Noise cancelling boom microphone for clear speech transmission in noisy environments
Excellent FM-radio reception
The ACK-version includes the Headset, 2 x NiMH rechargeable AA batteries (LR6NM), 1 x Battery charger with USB connector (FR09), and 1 x Power supply with USB connector (FR08).
Applications
Ear defenders, or ear protectors, are essential PPE in any environment where loud or continuous noise is a potential problem. Damage to hearing and even hearing loss are potential side effects of work in high-noise environments, and so ear defenders that provide noise-reduction are important to meet health and safety requirements. Ear defenders are typically used in;
Industrial
Maintenance
Agriculture
General Working Environments
Are ear muffs as effective as ear plugs?
For ear protection in high noise environments, ear plugs can offer a more complete level of noise reduction. However, ear muffs have advantages in that they don't have to be fit inside the ear, and so can be more comfortable, economic and hygienic.
Why are ear defenders necessary?
Hearing protection is designed to protect the user from extreme noise levels. The padding of the cushion is made from a type of acoustic foam that absorbs the waves to stop them from reaching the eardrum.
Som...
Popular items
G3000C VI, 3M PELTOR
G3000 Peak/No Peak Safety Helmet
Designed and manufactured in Sweden, the G3000 from Peltor has been developed in close collaboration with demanding users to provide a rugged safety helmet offering better ventilation and wider field of vision. Approved for use with the lining inserted either way round makes it ideal for surveyors to wear a safety helmet back-to-front without compromising the EN rating.
EN397 with additional approvals for electrical insulation (440V) and low temperature (-30ºC)
Well ventilated with 12 pairs 3x2mm slots extending over 130mm
Excellent impact absorption and distribution
Head size: 54-62cm
30mm International side slots for accessories
Designed for use with Peltor visors and Optime ear defenders
Reversible lining for confined space working/optical surveying
Manufactured from ABS
Optional chin strap see stock number
494-9820
Popular items
H510B-403, 3M PELTOR
Optime I Neckband Ear Defenders
Replaces Peltor H6 and H9 with improved features.,Neckband
For independent use in combination with headwear such as a hardhat
Ideal for use with a welding mask
Adjustable headband for heavier cups
SNR Value 26dB
Weight: 165g
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Standards
EN 352-3
Popular items
71347-00004CRS, 3M PELTOR
4800AF Clear Goggles
Panoramic vision lens
Anti-mist
Fits over spectacles
Standards
EN166-1B
Popular items
X4P3E-GB, 3M PELTOR
X4 Ear Defender, 32 dB
The 3M™ Peltor™ X4 Ear Defender with new specially formulated damping pads with innovative foam in the sealing ring provide excellent acoustic protection, particularly against sounds by low frequencies.
3M™ Peltor™ X4 Ear Defender with helmet attachment
Colour coding: bright green, indicating high attenuation (SNR 32 dB) combined with an extremely slim, lightweight design
Suitable for industry
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Replacement Hygiene Kit, stock number
778-5253
Popular items
11356-00000P, 3M PELTOR
LED Light Vision Spectacles
Safety spectacle equipped with 2 adjustable ultra-bright LED
Over 50 hours battery life, batteries can not be changed
Frame is made from polycarbonate and has rubber temples and rubber nose pads for extra comfort
Clear Polycarbonate lens with a hardium+ coating, which has anti-fog properties and protects against UV and impact at extreme temperatures
Suitable for electrical work, car repair, plumbing, home-work, mechanical work in a dark environment, night time reading etc
Standards
EN166-1F and EN170
Supplied with
Microfiber pouch which both protects and cleans the lenses when needed and batteries (already fitted).
Standards
EN166, EN170
Spectacles
When assessing the need for eye protection, first identify the hazards (airborne dust, projectiles, splashes etc.), then their extent (frequency/velocity of projectiles, frequency/severity of splashes). All lenses are made from polycarbonate and approved to EN 166-1F.
Popular items
X3A-RD, 3M PELTOR
X3 Ear Defender, 33 dB
The 3M™ Peltor™ X3 Ear Defenders are designed to offer protection against high noise levels.
3M™ Peltor™ X3 Ear Defender with standard headband
With a newly designed spacer to help improve attenuation
High attenuation (SNR 33 dB) from a single cup
Colour coding: red indicating high attenuation
Suitable for, forestry or heavy engineering
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Replacement Hygiene Kit, stock number
778-5244
Popular items
H540B-412, 3M PELTOR
Optime III Neckband Ear Defenders
Replaces Peltor H10 with improved features.,Neckband
For independent use in combination with headwear such as a hardhat
Ideal for use with a welding mask
Adjustable headband for heavier cups
SNR Value 35dB
Weight: 270g
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Standards
EN 352-3
Popular items
X2A-GA, 3M PELTOR
X2 Ear Defender, 31 dB
The 3M™ Peltor™ X2 Ear Defenders are designed to offer protection against moderate to high noise levels.
3M™ Peltor™ X2 Ear Defender with standard headband
Slim-line cups for moderate to high attenuation (SNR 31 dB) that meets the needs of most industrial applications.
Light weight
Colour coding: yellow, indicating moderate to high attenuation
Suitable for roadworks or construction
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Replacement Hygiene Kit, stock number
778-5240
Popular items
MT73H7A4410EU, 3M PELTOR
3M Peltor LiteCom™ Plus Headset
High-Performance
Dynamic Microphone
Rugged Design
Hands Free Use
Features & Benefits
Typical Applications
FAQs
Are ear muffs as effective as ear plugs?
Why are ear defenders necessary?
Why Choose 3M?
Popular items
MEX21AWS5, 3M PELTOR
WS Alert XP Ear Defender
Ear defenders with built in FM Radio reciever, bluetooth and level dependent funtion. Can be operated as a wireless telephone or music headphones in noisy environments.
FM Radio Reciever (2G circuit)
Wireless calls and music inc Stereo Bluetooth
Patented speaker system
Fast tuning
Memory and preset functions
Level dependent function (surround)
Sound limiter or daily dosimeter for streamed music
Stainless steel headband
Ghost voice guided interface
Radio Presets and self-seek tuning
3.5mm Stereo audio input cable supplied
Note
Rechargeable with NiMH batteries: these are not included see RS stock number
504-6067
Standards
EN 352-1:2002, EN 352-3:2002, EN 352-4:2001, EN 352-6:2002, EN60950-1:2006+A11:2009+A1:2010+A12:2011
Popular items
Z3G, 3M PELTOR
Helmet Mounting Posts
Mounting posts to attach multi visors to helmets with side slots. 2 posts per bag.
P3EV/2, 30mm wide (E fitting) visor mounts are required to fit Peltor Multi-Visors to Peltor G3000 Helmets (and other makes where they snap into place). If the visor is to be used in conjunction with the Peltor Optime range of ear defenders, then the P3EV/2 mounts are already supplied and fitted. To determine which type of fitting is supplied with an Optime unit, it is referred to as either P3E or P3G in the mfr's part number code
Z3G Helmet adaptors are the slot fitting back plates with 25mm wide (G fitting) tongue as shown above. They are required to adapt Peltor Multi-Visors and Peltor Optime ear defenders fitted with the P3EV/2 (E fitting) mounts to fit other makes of helmet such as the Protector HC600 range. If an E fitting does not snap into place then the G fitting should be tried. It is essential for the snap fitting to avoid the risk of these accessories becoming dislodged in use. To change the back plates, simply unscrew from the front covers
Note
P3GV/2,
208-6624
has been the standard part for some years and was intended to fit Protector HC45 and Tuffmaster II ranges. However since both are being discontinued by the manufacturer and with the introduction of the Peltor G3000, for which P3E is standard, this item will be withdrawn in due course.
New Items
New items
MRX21A3WS6, 3M PELTOR
3M WS ALERT XPI Headset
With the WS™ ALERT™ XPI Headset turn your hearing protector headset into a communications centre. Connect one or two devices via Bluetooth Multipoint technology and converse in normal volume even in noisy environments with the noise-cancelling microphone.
Features and Benefits
Stay protected whilst taking calls wirelessly or listening to the radio even in noisy environments
Level-dependent function for ambient listening to help improve your situational awareness (limited to 82 dB)
Bluetooth® Multi Point Technology for connection to one or two external devices for hands-free talk and streaming
Push-to-Listen feature to easily and instantaneously listen to your surroundings
Noise cancelling boom microphone for clear speech transmission in noisy environments
Excellent FM-radio reception
The ACK-version includes the Headset, 2 x NiMH rechargeable AA batteries (LR6NM), 1 x Battery charger with USB connector (FR09), and 1 x Power supply with USB connector (FR08).
Applications
Ear defenders, or ear protectors, are essential PPE in any environment where loud or continuous noise is a potential problem. Damage to hearing and even hearing loss are potential side effects of work in high-noise environments, and so ear defenders that provide noise-reduction are important to meet health and safety requirements. Ear defenders are typically used in;
Industrial
Maintenance
Agriculture
General Working Environments
Are ear muffs as effective as ear plugs?
For ear protection in high noise environments, ear plugs can offer a more complete level of noise reduction. However, ear muffs have advantages in that they don't have to be fit inside the ear, and so can be more comfortable, economic and hygienic.
Why are ear defenders necessary?
Hearing protection is designed to protect the user from extreme noise levels. The padding of the cushion is made from a type of acoustic foam that absorbs the waves to stop them from reaching the eardrum.
Som...
New items
X4P3E-GB, 3M PELTOR
X4 Ear Defender, 32 dB
The 3M™ Peltor™ X4 Ear Defender with new specially formulated damping pads with innovative foam in the sealing ring provide excellent acoustic protection, particularly against sounds by low frequencies.
3M™ Peltor™ X4 Ear Defender with helmet attachment
Colour coding: bright green, indicating high attenuation (SNR 32 dB) combined with an extremely slim, lightweight design
Suitable for industry
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Replacement Hygiene Kit, stock number
778-5253
New items
G3000C VI, 3M PELTOR
G3000 Peak/No Peak Safety Helmet
Designed and manufactured in Sweden, the G3000 from Peltor has been developed in close collaboration with demanding users to provide a rugged safety helmet offering better ventilation and wider field of vision. Approved for use with the lining inserted either way round makes it ideal for surveyors to wear a safety helmet back-to-front without compromising the EN rating.
EN397 with additional approvals for electrical insulation (440V) and low temperature (-30ºC)
Well ventilated with 12 pairs 3x2mm slots extending over 130mm
Excellent impact absorption and distribution
Head size: 54-62cm
30mm International side slots for accessories
Designed for use with Peltor visors and Optime ear defenders
Reversible lining for confined space working/optical surveying
Manufactured from ABS
Optional chin strap see stock number
494-9820
New items
11356-00000P, 3M PELTOR
LED Light Vision Spectacles
Safety spectacle equipped with 2 adjustable ultra-bright LED
Over 50 hours battery life, batteries can not be changed
Frame is made from polycarbonate and has rubber temples and rubber nose pads for extra comfort
Clear Polycarbonate lens with a hardium+ coating, which has anti-fog properties and protects against UV and impact at extreme temperatures
Suitable for electrical work, car repair, plumbing, home-work, mechanical work in a dark environment, night time reading etc
Standards
EN166-1F and EN170
Supplied with
Microfiber pouch which both protects and cleans the lenses when needed and batteries (already fitted).
Standards
EN166, EN170
Spectacles
When assessing the need for eye protection, first identify the hazards (airborne dust, projectiles, splashes etc.), then their extent (frequency/velocity of projectiles, frequency/severity of splashes). All lenses are made from polycarbonate and approved to EN 166-1F.
New items
X3A-RD, 3M PELTOR
X3 Ear Defender, 33 dB
The 3M™ Peltor™ X3 Ear Defenders are designed to offer protection against high noise levels.
3M™ Peltor™ X3 Ear Defender with standard headband
With a newly designed spacer to help improve attenuation
High attenuation (SNR 33 dB) from a single cup
Colour coding: red indicating high attenuation
Suitable for, forestry or heavy engineering
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Replacement Hygiene Kit, stock number
778-5244
New items
MT73H7A4410EU, 3M PELTOR
3M Peltor LiteCom™ Plus Headset
High-Performance
Dynamic Microphone
Rugged Design
Hands Free Use
Features & Benefits
Typical Applications
FAQs
Are ear muffs as effective as ear plugs?
Why are ear defenders necessary?
Why Choose 3M?
New items
X2A-GA, 3M PELTOR
X2 Ear Defender, 31 dB
The 3M™ Peltor™ X2 Ear Defenders are designed to offer protection against moderate to high noise levels.
3M™ Peltor™ X2 Ear Defender with standard headband
Slim-line cups for moderate to high attenuation (SNR 31 dB) that meets the needs of most industrial applications.
Light weight
Colour coding: yellow, indicating moderate to high attenuation
Suitable for roadworks or construction
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Replacement Hygiene Kit, stock number
778-5240
New items
71347-00004CRS, 3M PELTOR
4800AF Clear Goggles
Panoramic vision lens
Anti-mist
Fits over spectacles
Standards
EN166-1B
New items
H510B-403, 3M PELTOR
Optime I Neckband Ear Defenders
Replaces Peltor H6 and H9 with improved features.,Neckband
For independent use in combination with headwear such as a hardhat
Ideal for use with a welding mask
Adjustable headband for heavier cups
SNR Value 26dB
Weight: 165g
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Standards
EN 352-3
New items
H540B-412, 3M PELTOR
Optime III Neckband Ear Defenders
Replaces Peltor H10 with improved features.,Neckband
For independent use in combination with headwear such as a hardhat
Ideal for use with a welding mask
Adjustable headband for heavier cups
SNR Value 35dB
Weight: 270g
Note
THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE
SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889
Standards
EN 352-3
New items
MEX21AWS5, 3M PELTOR
WS Alert XP Ear Defender
Ear defenders with built in FM Radio reciever, bluetooth and level dependent funtion. Can be operated as a wireless telephone or music headphones in noisy environments.
FM Radio Reciever (2G circuit)
Wireless calls and music inc Stereo Bluetooth
Patented speaker system
Fast tuning
Memory and preset functions
Level dependent function (surround)
Sound limiter or daily dosimeter for streamed music
Stainless steel headband
Ghost voice guided interface
Radio Presets and self-seek tuning
3.5mm Stereo audio input cable supplied
Note
Rechargeable with NiMH batteries: these are not included see RS stock number
504-6067
Standards
EN 352-1:2002, EN 352-3:2002, EN 352-4:2001, EN 352-6:2002, EN60950-1:2006+A11:2009+A1:2010+A12:2011
New items
Z3G, 3M PELTOR
Helmet Mounting Posts
Mounting posts to attach multi visors to helmets with side slots. 2 posts per bag.
P3EV/2, 30mm wide (E fitting) visor mounts are required to fit Peltor Multi-Visors to Peltor G3000 Helmets (and other makes where they snap into place). If the visor is to be used in conjunction with the Peltor Optime range of ear defenders, then the P3EV/2 mounts are already supplied and fitted. To determine which type of fitting is supplied with an Optime unit, it is referred to as either P3E or P3G in the mfr's part number code
Z3G Helmet adaptors are the slot fitting back plates with 25mm wide (G fitting) tongue as shown above. They are required to adapt Peltor Multi-Visors and Peltor Optime ear defenders fitted with the P3EV/2 (E fitting) mounts to fit other makes of helmet such as the Protector HC600 range. If an E fitting does not snap into place then the G fitting should be tried. It is essential for the snap fitting to avoid the risk of these accessories becoming dislodged in use. To change the back plates, simply unscrew from the front covers
Note
P3GV/2,
208-6624
has been the standard part for some years and was intended to fit Protector HC45 and Tuffmaster II ranges. However since both are being discontinued by the manufacturer and with the introduction of the Peltor G3000, for which P3E is standard, this item will be withdrawn in due course.
Don’t hesitate to ask questions for better clarification.