Portable Appliance Tester Kits

Martindale MicroPAT Plus PAT Tester MPATNGO Martindale MicroPAT+ is a complete professional PAT testing package. It is one of the most cost effective downloading PAT packages on the market and a popular choice for users who want to start PAT testing with a computerised system. Features include fully downloadable memory, flash testing and compatibility with barcode scanners to improve asset management. The MicroPAT+ is made in compliance with all current PAT testing regulations. It can test class I and 2 appliances (including computers) and is compatible with both 240V and 110V equipment. Testing can be controlled manually or a dedicated automatic mode will cycle through tests appropriate to the connected appliance. Capabilities include the flash testing, earth continuity tests, insulation tests, run tests and earth leakage tests. Up to 1250 records can be stored on the MicroPAT+ internal memory. This data can be downloaded into compatible software on a PC. When testing is completed, the user simply closes the lid of the MicroPAT and uses the built-in handle to carry it like a briefcase. This keeps the tester protected during carriage from test to test. Features and Benefits Complies with all current PAT testing regulations Tests class 1 and 2 appliances (including IT equipment) Tests both 240 V and 110 V equipment Flash testing using custom-designed flash safety gun (included) Automatic or manual testing procedures Compatible with barcode scanners Large memory (1250 tests) with download to PC Built into its own protective carrying case Run test Earth leakage test Earth continuity test Insulation test Note The MicroPAT requires a separate breakout box to carry out testing of IEC and extension leads Supplied with Flash gun, LTDV extension lead tester, download lead, earth bond lead, 240 V socket to 110 V plug, MPAT Suite software, CCD barcode s...

Martindale MicroPAT Plus PAT Tester MPATNGO Martindale MicroPAT+ is a complete professional PAT testing package. It is one of the most cost effective downloading PAT packages on the market and a popular choice for users who want to start PAT testing with a computerised system. Features include fully downloadable memory, flash testing and compatibility with barcode scanners to improve asset management. The MicroPAT+ is made in compliance with all current PAT testing regulations. It can test class I and 2 appliances (including computers) and is compatible with both 240V and 110V equipment. Testing can be controlled manually or a dedicated automatic mode will cycle through tests appropriate to the connected appliance. Capabilities include the flash testing, earth continuity tests, insulation tests, run tests and earth leakage tests. Up to 1250 records can be stored on the MicroPAT+ internal memory. This data can be downloaded into compatible software on a PC. When testing is completed, the user simply closes the lid of the MicroPAT and uses the built-in handle to carry it like a briefcase. This keeps the tester protected during carriage from test to test. Features and Benefits Complies with all current PAT testing regulations Tests class 1 and 2 appliances (including IT equipment) Tests both 240 V and 110 V equipment Flash testing using custom-designed flash safety gun (included) Automatic or manual testing procedures Compatible with barcode scanners Large memory (1250 tests) with download to PC Built into its own protective carrying case Run test Earth leakage test Earth continuity test Insulation test Note The MicroPAT requires a separate breakout box to carry out testing of IEC and extension leads Supplied with Flash gun, LTDV extension lead tester, download lead, earth bond lead, 240 V socket to 110 V plug, MPAT Suite software, CCD barcode scanner, barcoded PASS labels, 100 FAIL labels, instruction manual, accessory carrying case

PrimeTest 250+ and Elements Bundle (UK) The PrimeTest 250+ PAT tester offers fast and efficient electrical safety testing with labelprinting and data storage, including free datalogger software. The PAT tester features all of the required tests of the IET 4th Edition Code of Practice along with USB download The PrimeTest 250 Plus is also fully compatible with the new Test n Tag Pro serial printer for quick and easy label printing without any setup required PrimeTest 250+ and Elements Bundle is supplied with: PATGuard Elements software, 1000 Pass labels, 100 Fail labels, PrimeTest Checkbox, Cloverleaf adaptor, PAT Training DVD, Guide to PAT testing, PAT logbook and PATBag carry case Key Features Plug and print - easy label printing with no setup Date stamped results for full traceability Single key save Single key download Store 999 appliance records Industry standard download format Test 3 phase appliances Electrical Test Functions Low current earth continuity testguaranteeing accurate measurement (patent pending) Insulation resistance at 250 / 500V IEC lead test Protective conductor current Touch current 3 Phase leakage current (requires adaptor) Alternative leakage current RCD test (30mA / 150mA) Power socket test

Fluke 6500-2 PAT Starter Kit UK Version The Fluke 6500-2 Portable appliance tester verifies the electrical safety and operation of portable appliances in accordance with relevant guidelines and regulations. With powerful auto test capabilities and simplified controls, including ’one touch’ test routines, the Fluke 6500-2 PAT Tester increases the number of tests you can perform per day without compromising results The Fluke 6500-2 is suitable for testing both 230 V and 110 V appliances,the 6500-2 model runs all the required safety tests: Earth bond low (low/high current, Insulation 500 V, 250 V, Leakage (PE current, touch current, substitute current), Can test 110 V appliances (earth bond, insulation) via the 110 V adapter kit Integral QWERTY keyboard for rapid data entry Memory for back-up data storage and USB port for transfer to PC Large backlit graphics display Pre-set, auto-test sequences for user convenience Integral site, location and description codes for faster data processing Memory review facility for more on-site control Dedicated key for each test for ’one-touch’ testing Pre-set pass/fail levels to save time Large display for easy reading Single mains socket for appliance connection Separate IEC socket for easy mains/extension lead testing Detachable test leads for quick field replacement Integral carrying handle Dimensions: 200 x 275 x 114 mm Weight: 3.13 kg Test specifications Power-on test Earth bond test (Rpe) Insulation test (RISO) Touch current test Substitute leakage current RCD Test: trip current RCD Test: trip time Load/Leakage test: load current Load/Leakage test: load power display range 230 V mains Load/Leakage test: Leakage current PELV test Standards Complies with EN61010-1 3rd edition CAT II, 300 V, pol 2 Supplied with DMS 0702 Software, EXTL100 Extension Lead Test Adaptor, Pass 560R Appliance pass labels.

PROFITEST MTECH+ Starter Package A broad-range measuring device allows for use of the test instrument in all alternating and 3-phase electrical systems with voltages from 65 to 500 V and frequencies of 15.4 to 420 Hz. Loop and line impedance measurement Measurement of insulation resistance using nominal voltage, with variable or rising test voltage Low-resistance measurement Earth resistance measurement Standing-Surface Insulation Measurement Universal connector system Standard-compliant Testing of Electric Vehicle Charging Stations in accordance with IEC 60364-6 and IEC 61851 ProfiScan - App for Android Smartphones and Tablet PCs Testing of residual current devices (RCCBs) Special testing for systems and RCCBs Testing for special RCDs Testing of RCCBs in IT systems VDE 0100 / IEC 60364.6 Supplied with PROFITEST MTECH+, variable plug adapter set and plastic system case SORTIMO L-BOXX GM with foam insert.

Master Package SECUTEST BASE10 Master Paskage SECUTEST BASE10: same standard equipment as for the SECUTEST BASE10 plus additional accessories see below. The SECUTEST BASE10 tester allows the electric technician a safe and easy test performance as well as documentation of the tests according to the applicable standards. Test Instrument for Measuring Electrical Safety of Devices per VDE 0701-0702, IEC 62353 and IEC 60974-43. 8 test sequences for fast testing of simple devices An universal, selectable test sequence A test sequence performed by single measurements Test current for protective conductor testing: 200 mA and 10 A Revolutionary data management and storage concept for automated test sequences and single measurements with memory for up to 50,000 data records Pioneering operating concept with double rotary switch, direct selection keys and softkeys High-resolution and brillant 4.3" TFT color display Unique multiple measurement allows easy recording of several measurement points Automatic recognition of DUT connection and safety class Compact and shock-proof housing based on integrated rubber protection Most complete test report generation in compliance of standards State-of-the-art interfaces for data entry (2x USB A) and data exchange (1x USB B) Comprehensive settings for international use (language, keyboard layout, character set, date / time) ETC Reporting Software: The software offers many supporting functions for data acquisition and data management as well as documentation of the performed tests Supplied with Mains power cable, test probe 2m (not coiled), USB cable (USB A to USB B) 1.5m, plug-on alligator clip, condensed operating instructions, ETC report software available on the Internet, adapter for testing of single-phase extensioncables, plastic system case, foam insert for SORTIMO L-BOXX with compartment for SECUTEST BASE(10), barcode scanner with USB connection for the following codes: code 39, code 128, EAN 13