Channel Support Systems

What are Channel Support Systems and Their Various Components?

Channel support systems are also known as struts, channel struts, Unistrut, metal framing hardware, and construction struts. These products are widely used throughout the mechanical or electrical industries for supporting lightweight structures that include plumbing and wiring. Therefore, they can be used to create and support various structures, such as cable trays, shelves, and rooftop walkways.

They known for carrying out building services like pipework, cables, or anything else that requires support and needs to be removed from the way. You can also use these systems to remove services from ceilings, walls, or on rooftops and below the floor. Support systems consist of many components such as brackets, channels, and nuts, capable of being assembled in unlimited configurations.

Channel Support Systems Components

The framework is built from various components that can help you make any layout you require. The most basic parts of these systems are plain and slotted channels that are available in various lengths and cross-sections, channel brackets in different sizes and angles, and channel nuts or fixings to connect everything. Some of the components included in Support Systems include:

Slotted Channels

Slotted channels are bracket components specially designed for support systems for mechanical, plumbing, and electrical installations. They can attached to current steelwork or directly to ceilings, walls, and floors,

See also  LED: The Best Option for Light Applications

Base Plates

Base plates typically used for guiding the drill bit and the conductor to the area of the good hole on the seabed. This is an effective device that is usually plated with steel plate and rebar, and then it is filled with concrete in the center. This mostly the case for temporary oriented base plates.

U & Z Shaped Fittings

These are structural components commonly found in engineering. These are metal fittings whose main purpose is to join the two sections of a metal strut.

Pipe Clamps

A pipe clamp known as a pipe clip and used to connect pipes or tubes to the remainder of a pipe hanger assembly. They used for securely holding the pipes in place and still allowing for movement to achieve maximum performance during the application. They used in plumbing, drainage, heating, and electrical applications and manufactured from various materials.

Cone Pointed Screws

A cone Pointed screw is a component that is an industrial fastening and is utilized for precision. They designed to offer high quality and meet most industrial requirements.

Cantilever Arms

The primary purpose of cantilever arms is to store bulky, oversized, and long loads such as plasterboard, timber, steel trusses, piping, etc. They are highly adjustable and allow flexibility to store various products.

Plain Channels

Plain channels metal brackets designed as a channel support systems component for supporting various mechanical, electrical, and plumbing installation or construction tasks.

Beam Clamps

A Beam Clamps is mechanical support used to connect a holder rod to the top flange of a bar or bar joist. Shaft clips can connect to the top rib up to 1-1/4″ thickness. Moreover, there are various bar braces like little mouth, enormous mouth, purlin, focus load, c-clip, and light obligation steel.

See also  PCB Connectors: What are Their Different Types and How to maintain them?

Flat Fittings

Flat fittings are utilized for connecting the interacting Unistrut channels. They also effectively utilized as washers to connect the all-threaded rod to the Unistrut or used as a connection for diagonal bracing.

Channel Nuts

Channel nuts commonly used with channel support systems. The feature grooves along the edges can function as small teeth and lock onto the channel when tightened.

Channel Lengths

Channel lengths, as a rule, come in standard 3m and 6m lengths yet can likewise be given sliced to estimate swiffer development on location. However, there is a wide scope of profiles accessible for various applications. Standard sizes are normally 41 x 21mm and 41 x 41mm single or consecutive channels, albeit bigger sizes are accessible, for example, 41 x 62mm and 41 x 83mm. There are additionally hardcore and super lightweight choices. And most sorts come as one or the other plain or opened, which has pre-cut spaces for quick fixing. Contingent on the ideal completion, divert lengths are presented in pre-galvanized, hot-dip galvanized, or tempered steel.

Common Uses of Channel Support Systems

Channel support systems commonly used for cabling, plumbing, HVAC ductwork, and other pipework. You can also use them to create lightweight storage systems, workbench supports, tool or equipment racks, or utilized for lifting items. And Removing them from the way that occupies space on the floor.

Comments are closed.