Featured Products
TT-SX 9001 - 30MHz active differential probe - x10 / x100 The Testec TT-SX 9001 High-Voltage Differential probes allow conventional earth-grounde...
Sensing heads Series HF Optional accessories Accessory kit for probes (Stock no.: 208-9279 ) Special accessories for probes (e.g. RS stock no.:...
TT-SX 9002 - 30MHz active differential probe - x20 / x200 The Testec TT-SX 9002 High-Voltage Differential probes allow conventional earth-grounde...
Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsu...
TT-SI 8110 active differential probe The Testec active differential probe TT-SI 8110 allows safe and accurate high voltage measurements between t...
Special accessories for sensing heads Description Stock no. Flexible sensing head adapter on 4 mm connector 437-6569 Clamping hook, screw...
TT-SX 9002 - 30MHz active differential probe - x20 / x200 The Testec TT-SX 9002 High-Voltage Differential probes allow conventional earth-grounde...
TT-SI 8010A active differential probe The Testec active differential probe TT-SI 8010A allows safe and accurate high voltage measurements between...
Differential Probes SI 9010/9110/9101 Type SI 9010 SI 9110 SI 9101 Bandwidth 70 MHz 100 MHz 100 MHz Separation factor 1:100 / 1:1000...
The Testec active differential probe allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to ±60 V co...
TT-SI 8071 active differential probe The Testec active differential probe TT-SI 8071 allows safe and accurate high voltage measurements between t...
Testec 15kV High Voltage Probe 1000:1 voltage divider type high voltage probe BNC termination and earthing...
Popular Categories For Testec
Popular Items
Popular items
15601, Testec
TT-SX 9001 - 30MHz active differential probe - x10 / x100
The Testec TT-SX 9001 High-Voltage Differential probes allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to 700V differential or common mode voltage (x100). This model offers user selectable attenuation setting (x10 & x100), making the probe highly versatile and usable for a broad range of applications including power supply measurements and motor controls. This probe is compatible with any oscilloscope with a 1 MΩ BNC female input and feature up to 30 MHz of bandwidth. The probe can be powered by any oscilloscope USB port (USB Power Cord USB-A to USB-C included), internal batteries (4 x AA batteries), or USB power adapter, both not included in the scope of delivery. The probe is shipped standard with a factory calibration certificate.
30 MHz bandwidth
Up to 700V differential (DC + pk AC)
1,000V CAT III rated
cTUVus safety certified
Voltage over range indicator
Switchable attenuation ranges
Multiple power options - batteries, oscilloscope, or mains
Insulated BNC interface
Protective rubber boot
Applications
power supply measurments
motor controls
product design applications
automotive testing
Supplied with/Kit contains:
2 x hook clips (red and black)
1 x USB Power Cord (1 m) - USB-A to USB-C
1 x calibration certificate
What other Probes are available in this Testec range?
TT-SX 9002
Approvals/Certification
EN61010-031:2015 Ed. 2.0
EN61010-1:2010/AMD:2016
2014/35/EU
EN61326-2013
2014/30/EU
cTUVus
CE
UKCA
RoHS 2
China RoHS2
Popular items
HUM-ABC123, Testec
Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.
Popular items
12040, Testec
Sensing heads Series HF
Optional accessories
Accessory kit for probes (Stock no.:
208-9279
)
Special accessories for probes (e.g. RS stock no.:
437-6569
)
Type
TT-HF 112
TT-HF 212
TT-HF 212RA
(readout)
TT-HF 312
TT-HF 412
TT-HF 412RA
(readout)
TT-HF 512
TT-HF 512RA
(readout)
Stock no.
358-7869
358-7831
512-4757
358-7803
358-7825
512-4735
358-7796
512-4729
Bandwidth
40 MHz
300 MHz
30 / 300 MHz
350 MHz
500 MHz
Separation factor
1:1
10:1
1:1 / 10:1
10:1
10:1
Rise time
Input capacitance
45 pF
13.5 pF
47 / 15 pF
13.5 pF
9 pF
Input resistance
As oscilloscope
10 MΩ
As oscilloscope / 10 MΩ
10 MΩ
10 MΩ
Max. Input voltage
400 Vs
600 Vs
400 / 600 Vs
600 Vs
200 Vs
Cable length
1.2 m
1.2 m
1.2 m
1.2 m
1.2 m
Passive Oscilloscope Probes
Note
All the products in this range are supplied for use with instruments with a permanent earth connection.
Popular items
TT-SX 9002, Testec
TT-SX 9002 - 30MHz active differential probe - x20 / x200
The Testec TT-SX 9002 High-Voltage Differential probes allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to1400V differential or common mode voltage (x200). This model offers user selectable attenuation setting (x20 & x200), making the probe highly versatile and usable for a broad range of applications including power supply measurements and motor controls. This probe is compatible with any oscilloscope with a 1 MΩ BNC female input
and feature up to 30 MHz of bandwidth. The probe can be powered by an oscilloscope USB port (USB Power Cord USB-A to USB-C included), internal batteries (4 x AA batteries), or USB power adapter, both not included in the scope of delivery. The probe is shipped standard with a factory calibration certificate.
30 MHz bandwidth
Up to 1400V differential (DC + pk AC)
1,000V CAT III rated
cTUVus safety certified
Voltage over range indicator
Switchable attenuation ranges
Multiple power options - batteries, oscilloscope, or mains
Insulated BNC interface
Protective rubber boot
Applications
power supply measurments
motor controls
product design applications
automotive testing
Supplied with/Kit contains:
2 x hook clips (red and black)
1 x USB Power Cord (1 m) - USB-A to USB-C
1 x calibration certificate
What other Probes are available in this Testec range?
TT-SX 9001
Approvals/Certification
EN61010-031:2015 Ed. 2.0
EN61010-1:2010/AMD:2016
2014/35/EU
EN61326-2013
2014/30/EU
cTUVus
CE
UKCA
RoHS 2
China RoHS2
Popular items
15410, Testec
TT-SI 8110
active differential probe
The Testec active differential probe TT-SI 8110 allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 100MHz / ±2800V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter.
The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
Bandwidth: 100MHz
Rise time: 3,5ns
Attenuation ratio: x100 / x1000
DC accuracy: ±2%
Maximum input voltage:
Differential mode: ±280V (DC + AC Peak) @ x100
±2800V (DC + AC Peak) @ x1000
Common mode: ±2800V (DC + Peak AC)
Each side to ground: 600Vrms CAT III / 1000Vrms CAT II
Safety standard: IEC61010-031: 2015
Scope of delivery:
1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
Popular items
20030-2, Testec
Special accessories for sensing heads
Description
Stock no.
Flexible sensing head adapter on 4 mm connector
437-6569
Clamping hook, screw-on
437-6553
Ground spring for HF applications
437-6575
Micro IC clip with lead for attaching to probe tip (red)
437-6014
Micro IC clip with lead for connecting to sensing head earth (yellow)
437-6020
Micro IC clip double set (red, black)
437-6036
Replacement probe tips (double set)
375-4520
Passive Oscilloscope Probes
Note
All the products in this range are supplied for use with instruments with a permanent earth connection.
Popular items
15602, Testec
TT-SX 9002 - 30MHz active differential probe - x20 / x200
The Testec TT-SX 9002 High-Voltage Differential probes allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to1400V differential or common mode voltage (x200). This model offers user selectable attenuation setting (x20 & x200), making the probe highly versatile and usable for a broad range of applications including power supply measurements and motor controls. This probe is compatible with any oscilloscope with a 1 MΩ BNC female input
and feature up to 30 MHz of bandwidth. The probe can be powered by an oscilloscope USB port (USB Power Cord USB-A to USB-C included), internal batteries (4 x AA batteries), or USB power adapter, both not included in the scope of delivery. The probe is shipped standard with a factory calibration certificate.
30 MHz bandwidth
Up to 1400V differential (DC + pk AC)
1,000V CAT III rated
cTUVus safety certified
Voltage over range indicator
Switchable attenuation ranges
Multiple power options - batteries, oscilloscope, or mains
Insulated BNC interface
Protective rubber boot
Applications
power supply measurments
motor controls
product design applications
automotive testing
Supplied with/Kit contains:
2 x hook clips (red and black)
1 x USB Power Cord (1 m) - USB-A to USB-C
1 x calibration certificate
What other Probes are available in this Testec range?
TT-SX 9001
Approvals/Certification
EN61010-031:2015 Ed. 2.0
EN61010-1:2010/AMD:2016
2014/35/EU
EN61326-2013
2014/30/EU
cTUVus
CE
UKCA
RoHS 2
China RoHS2
Popular items
15411, Testec
TT-SI 8010A
active differential probe
The Testec active differential probe TT-SI 8010A allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 70MHz / ±7000V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter. The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
Bandwidth: 70MHz
Rise time: 5ns
Attenuation ratio: x100 / x1000
DC accuracy: ± 2%
Maximum input voltage:
Differential mode: ±700V (DC + AC Peak) @ x100
±7000V (DC + AC Peak) @ x1000
Common mode: ±7000V (DC + Peak AC)
Each side to ground: 1000Vrms CAT III / 2300Vrms
Safety standard: IEC61010-031: 2015
Scope of delivery:
1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
Popular items
15106, Testec
Differential Probes SI 9010/9110/9101
Type
SI 9010
SI 9110
SI 9101
Bandwidth
70 MHz
100 MHz
100 MHz
Separation factor
1:100 / 1:1000
1:100 / 1:1000
1:10 / 1:100
Accuracy
±2%
±2%
±2%
Rise time
5 ns
3.5 ns
3.5 ns
Input impedance:
10 MΩ / 10 pF
against earth
4 MΩ / 7 pF
against earth
4 MΩ / 7 pF
against earth
Input voltage
Differential range
01:10
±70 V (DC + ACs)
/ 70 V rms
1:100
±700 V (DC + ACs)
/ 700 V rms
±140 V (DC + ACs)
/ 140 V rms
±700 V (DC + ACs)
/ 700 V rms
1:1000
±7000 V (DC + ACs)
/ 5000 V rms
±1400 V (DC + ACs)
/ 1000 V rms
Common mode range
01:10
±700 V (DC + ACs)
/ 700 V rms
1:100
±7000 V (DC + ACs)
/ 2500 V rms
±1400 V (DC + ACs)
/ 1000 V rms
±700 V (DC + ACs)
/ 700 V rms
1:1000
±7000 V (DC + ACs)
/ 2500 V rms
±1400 V (DC + ACs)
/ 1000 V rms
Output
Amplitude
±7 V (at 50 kΩ)
±1.4 V (at 50 kΩ)
±7 V (at 50 kΩ)
Offset (typical)
>±5 mV
>±5 mV
>±5 mV
Interference (typical)
0.9 mV rms
0.6 mV rms
0.9 mV rms
Source impedance
(typical)
50 Ω
50 Ω
50 Ω
CMRR
-80 dB at 50 Hz,
-60 dB at 20 kHz
-80 dB at 60 Hz,
-50 dB at 1 MHz
-85 dB at 50 Hz,
-55 dB at 1 MHz
Supplied with
Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case)
Popular items
TT-SX 200, Testec
The Testec active differential probe allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to ±60 V common mode voltage with a fixed attenuation 10:1. The probe is compatible with any oscilloscope having 50 Ω or 1 MΩ BNC female input and feature up to 200 MHz of bandwidth.
Resistor to adjust offset
To connect the supplied USB cable
Popular items
TT-SI 8071, Testec
TT-SI 8071
active differential probe
The Testec active differential probe TT-SI 8071 allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 70MHz / ±700V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter.
The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
Bandwidth: 70MHz
Rise time: 5ns
Attenuation ratio: x10 / x100
DC accuracy: ± 2%
Maximum input voltage:
Differential mode: ±70V (DC + AC Peak) @ x10
±700V (DC + AC Peak) @ x100
Common mode: ±700V (DC + Peak AC)
Each side to ground: 600Vrms CAT III / 1000Vrms CAT II
Safety standard: IEC61010-031: 2015
Scope of delivery:
1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
Popular items
TT-HVP15 HF, Testec
Testec 15kV High Voltage Probe
1000:1 voltage divider type high voltage probe
BNC termination and earthing crocodile clip
Screw in tip and screw in hook supplied
Approved to EN61010-1 & EN61010-2-031
Maximum Input Voltage
dc voltage: 15kV dc
Over Voltage Cat II
ac voltage: 10kVac r.m.s (0 to 18KHz)
Pollution Degree 2
Derating to 40Vac r.m.s at 50MHz
Temp Coefficient
Division Ratio Accuracy
±1% at 1kHz (when terminated in 1MΩ
Cable Length
2.0m
Operating Temperature
0°C to +50°C
Bandwidth
d.c. 50MHz (-3dB)
Compensation Range
6-20pF
Input Capacitance
15-30pF
Input Impedance
100MΩ
EN6010 Rating
Yes
Note
This product is for use with instruments with a permanent earth connection
Approvals
TUV
New Items
New items
15601, Testec
TT-SX 9001 - 30MHz active differential probe - x10 / x100
The Testec TT-SX 9001 High-Voltage Differential probes allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to 700V differential or common mode voltage (x100). This model offers user selectable attenuation setting (x10 & x100), making the probe highly versatile and usable for a broad range of applications including power supply measurements and motor controls. This probe is compatible with any oscilloscope with a 1 MΩ BNC female input and feature up to 30 MHz of bandwidth. The probe can be powered by any oscilloscope USB port (USB Power Cord USB-A to USB-C included), internal batteries (4 x AA batteries), or USB power adapter, both not included in the scope of delivery. The probe is shipped standard with a factory calibration certificate.
30 MHz bandwidth
Up to 700V differential (DC + pk AC)
1,000V CAT III rated
cTUVus safety certified
Voltage over range indicator
Switchable attenuation ranges
Multiple power options - batteries, oscilloscope, or mains
Insulated BNC interface
Protective rubber boot
Applications
power supply measurments
motor controls
product design applications
automotive testing
Supplied with/Kit contains:
2 x hook clips (red and black)
1 x USB Power Cord (1 m) - USB-A to USB-C
1 x calibration certificate
What other Probes are available in this Testec range?
TT-SX 9002
Approvals/Certification
EN61010-031:2015 Ed. 2.0
EN61010-1:2010/AMD:2016
2014/35/EU
EN61326-2013
2014/30/EU
cTUVus
CE
UKCA
RoHS 2
China RoHS2
New items
12040, Testec
Sensing heads Series HF
Optional accessories
Accessory kit for probes (Stock no.:
208-9279
)
Special accessories for probes (e.g. RS stock no.:
437-6569
)
Type
TT-HF 112
TT-HF 212
TT-HF 212RA
(readout)
TT-HF 312
TT-HF 412
TT-HF 412RA
(readout)
TT-HF 512
TT-HF 512RA
(readout)
Stock no.
358-7869
358-7831
512-4757
358-7803
358-7825
512-4735
358-7796
512-4729
Bandwidth
40 MHz
300 MHz
30 / 300 MHz
350 MHz
500 MHz
Separation factor
1:1
10:1
1:1 / 10:1
10:1
10:1
Rise time
Input capacitance
45 pF
13.5 pF
47 / 15 pF
13.5 pF
9 pF
Input resistance
As oscilloscope
10 MΩ
As oscilloscope / 10 MΩ
10 MΩ
10 MΩ
Max. Input voltage
400 Vs
600 Vs
400 / 600 Vs
600 Vs
200 Vs
Cable length
1.2 m
1.2 m
1.2 m
1.2 m
1.2 m
Passive Oscilloscope Probes
Note
All the products in this range are supplied for use with instruments with a permanent earth connection.
New items
TT-SX 9002, Testec
TT-SX 9002 - 30MHz active differential probe - x20 / x200
The Testec TT-SX 9002 High-Voltage Differential probes allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to1400V differential or common mode voltage (x200). This model offers user selectable attenuation setting (x20 & x200), making the probe highly versatile and usable for a broad range of applications including power supply measurements and motor controls. This probe is compatible with any oscilloscope with a 1 MΩ BNC female input
and feature up to 30 MHz of bandwidth. The probe can be powered by an oscilloscope USB port (USB Power Cord USB-A to USB-C included), internal batteries (4 x AA batteries), or USB power adapter, both not included in the scope of delivery. The probe is shipped standard with a factory calibration certificate.
30 MHz bandwidth
Up to 1400V differential (DC + pk AC)
1,000V CAT III rated
cTUVus safety certified
Voltage over range indicator
Switchable attenuation ranges
Multiple power options - batteries, oscilloscope, or mains
Insulated BNC interface
Protective rubber boot
Applications
power supply measurments
motor controls
product design applications
automotive testing
Supplied with/Kit contains:
2 x hook clips (red and black)
1 x USB Power Cord (1 m) - USB-A to USB-C
1 x calibration certificate
What other Probes are available in this Testec range?
TT-SX 9001
Approvals/Certification
EN61010-031:2015 Ed. 2.0
EN61010-1:2010/AMD:2016
2014/35/EU
EN61326-2013
2014/30/EU
cTUVus
CE
UKCA
RoHS 2
China RoHS2
New items
HUM-ABC123, Testec
Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.Lorem Ipsum is palceholder.
New items
15410, Testec
TT-SI 8110
active differential probe
The Testec active differential probe TT-SI 8110 allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 100MHz / ±2800V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter.
The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
Bandwidth: 100MHz
Rise time: 3,5ns
Attenuation ratio: x100 / x1000
DC accuracy: ±2%
Maximum input voltage:
Differential mode: ±280V (DC + AC Peak) @ x100
±2800V (DC + AC Peak) @ x1000
Common mode: ±2800V (DC + Peak AC)
Each side to ground: 600Vrms CAT III / 1000Vrms CAT II
Safety standard: IEC61010-031: 2015
Scope of delivery:
1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
New items
20030-2, Testec
Special accessories for sensing heads
Description
Stock no.
Flexible sensing head adapter on 4 mm connector
437-6569
Clamping hook, screw-on
437-6553
Ground spring for HF applications
437-6575
Micro IC clip with lead for attaching to probe tip (red)
437-6014
Micro IC clip with lead for connecting to sensing head earth (yellow)
437-6020
Micro IC clip double set (red, black)
437-6036
Replacement probe tips (double set)
375-4520
Passive Oscilloscope Probes
Note
All the products in this range are supplied for use with instruments with a permanent earth connection.
New items
15602, Testec
TT-SX 9002 - 30MHz active differential probe - x20 / x200
The Testec TT-SX 9002 High-Voltage Differential probes allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to1400V differential or common mode voltage (x200). This model offers user selectable attenuation setting (x20 & x200), making the probe highly versatile and usable for a broad range of applications including power supply measurements and motor controls. This probe is compatible with any oscilloscope with a 1 MΩ BNC female input
and feature up to 30 MHz of bandwidth. The probe can be powered by an oscilloscope USB port (USB Power Cord USB-A to USB-C included), internal batteries (4 x AA batteries), or USB power adapter, both not included in the scope of delivery. The probe is shipped standard with a factory calibration certificate.
30 MHz bandwidth
Up to 1400V differential (DC + pk AC)
1,000V CAT III rated
cTUVus safety certified
Voltage over range indicator
Switchable attenuation ranges
Multiple power options - batteries, oscilloscope, or mains
Insulated BNC interface
Protective rubber boot
Applications
power supply measurments
motor controls
product design applications
automotive testing
Supplied with/Kit contains:
2 x hook clips (red and black)
1 x USB Power Cord (1 m) - USB-A to USB-C
1 x calibration certificate
What other Probes are available in this Testec range?
TT-SX 9001
Approvals/Certification
EN61010-031:2015 Ed. 2.0
EN61010-1:2010/AMD:2016
2014/35/EU
EN61326-2013
2014/30/EU
cTUVus
CE
UKCA
RoHS 2
China RoHS2
New items
15411, Testec
TT-SI 8010A
active differential probe
The Testec active differential probe TT-SI 8010A allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 70MHz / ±7000V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter. The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
Bandwidth: 70MHz
Rise time: 5ns
Attenuation ratio: x100 / x1000
DC accuracy: ± 2%
Maximum input voltage:
Differential mode: ±700V (DC + AC Peak) @ x100
±7000V (DC + AC Peak) @ x1000
Common mode: ±7000V (DC + Peak AC)
Each side to ground: 1000Vrms CAT III / 2300Vrms
Safety standard: IEC61010-031: 2015
Scope of delivery:
1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
New items
15106, Testec
Differential Probes SI 9010/9110/9101
Type
SI 9010
SI 9110
SI 9101
Bandwidth
70 MHz
100 MHz
100 MHz
Separation factor
1:100 / 1:1000
1:100 / 1:1000
1:10 / 1:100
Accuracy
±2%
±2%
±2%
Rise time
5 ns
3.5 ns
3.5 ns
Input impedance:
10 MΩ / 10 pF
against earth
4 MΩ / 7 pF
against earth
4 MΩ / 7 pF
against earth
Input voltage
Differential range
01:10
±70 V (DC + ACs)
/ 70 V rms
1:100
±700 V (DC + ACs)
/ 700 V rms
±140 V (DC + ACs)
/ 140 V rms
±700 V (DC + ACs)
/ 700 V rms
1:1000
±7000 V (DC + ACs)
/ 5000 V rms
±1400 V (DC + ACs)
/ 1000 V rms
Common mode range
01:10
±700 V (DC + ACs)
/ 700 V rms
1:100
±7000 V (DC + ACs)
/ 2500 V rms
±1400 V (DC + ACs)
/ 1000 V rms
±700 V (DC + ACs)
/ 700 V rms
1:1000
±7000 V (DC + ACs)
/ 2500 V rms
±1400 V (DC + ACs)
/ 1000 V rms
Output
Amplitude
±7 V (at 50 kΩ)
±1.4 V (at 50 kΩ)
±7 V (at 50 kΩ)
Offset (typical)
>±5 mV
>±5 mV
>±5 mV
Interference (typical)
0.9 mV rms
0.6 mV rms
0.9 mV rms
Source impedance
(typical)
50 Ω
50 Ω
50 Ω
CMRR
-80 dB at 50 Hz,
-60 dB at 20 kHz
-80 dB at 60 Hz,
-50 dB at 1 MHz
-85 dB at 50 Hz,
-55 dB at 1 MHz
Supplied with
Probe, 4 x AA batteries, instructions (also supplied with 9101: mains adapter and storage case)
New items
TT-SX 200, Testec
The Testec active differential probe allow conventional earth-grounded oscilloscopes to be used for floating signal measurements - up to ±60 V common mode voltage with a fixed attenuation 10:1. The probe is compatible with any oscilloscope having 50 Ω or 1 MΩ BNC female input and feature up to 200 MHz of bandwidth.
Resistor to adjust offset
To connect the supplied USB cable
New items
TT-SI 8071, Testec
TT-SI 8071
active differential probe
The Testec active differential probe TT-SI 8071 allows safe and accurate high voltage measurements between two voltage points, none being connected to ground. This probe is designed for a variety of measurements with up to 70MHz / ±700V and compatible with grounded oscilloscopes (1MOhm input) of all common manufacturers. The probe can be powered with the supplied USB cable and the AC adapter.
The probe is supplied in a hardcase with extensive accessories and factory calibration certificate.
Bandwidth: 70MHz
Rise time: 5ns
Attenuation ratio: x10 / x100
DC accuracy: ± 2%
Maximum input voltage:
Differential mode: ±70V (DC + AC Peak) @ x10
±700V (DC + AC Peak) @ x100
Common mode: ±700V (DC + Peak AC)
Each side to ground: 600Vrms CAT III / 1000Vrms CAT II
Safety standard: IEC61010-031: 2015
Scope of delivery:
1 x probe series 8000
1 x hardcase
2 x test leads with insulated banana plug 4mm (red & black)
2 x hook clips (red & black)
2 x pincer hook clip (red & black)
2 x crocodile clips (red & black)
1 x insulated BNC test lead 100cm
1 x USB power cord
1 x power adapter EU version
1 x factory calibration certificate
1 x user manual
New items
TT-HVP15 HF, Testec
Testec 15kV High Voltage Probe
1000:1 voltage divider type high voltage probe
BNC termination and earthing crocodile clip
Screw in tip and screw in hook supplied
Approved to EN61010-1 & EN61010-2-031
Maximum Input Voltage
dc voltage: 15kV dc
Over Voltage Cat II
ac voltage: 10kVac r.m.s (0 to 18KHz)
Pollution Degree 2
Derating to 40Vac r.m.s at 50MHz
Temp Coefficient
Division Ratio Accuracy
±1% at 1kHz (when terminated in 1MΩ
Cable Length
2.0m
Operating Temperature
0°C to +50°C
Bandwidth
d.c. 50MHz (-3dB)
Compensation Range
6-20pF
Input Capacitance
15-30pF
Input Impedance
100MΩ
EN6010 Rating
Yes
Note
This product is for use with instruments with a permanent earth connection
Approvals
TUV
Don’t hesitate to ask questions for better clarification.