Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

0.0 / 5

Reviews 0 Not Rated Yet
SKF Profile

Website
Manufacturer Type
Company Size
Location
Founded
Specialties
Reviews
5 star
(0%)
4 star
(0%)
3 star
(0%)
2 star
(0%)
1 star
(0%)

Be the first to review this manufacturer.
Don’t hesitate to ask questions for better clarification.

Featured Products


Popular Categories For SKF


Categories For SKF




New Items
New items
KR 47PP, SKF

KR 47PP, SKF

SKF Stud Type Track Rollers Cam followers of the KR design are fitted with needle rollers and have a thick outer ring making them suitable for shock loads. Concentric cam follower The outer ring is guided via the integral flange at the head of the stud and the pressed on side washer SKF Cam followers on the PPA design have axial slide rings of polyamide 66 These slide rings reduce the friction and give relatively cool operation that is advantageous for the grease service life In the radial direction the slide ring forms a narrow gap to the outer ring that protects against course contaminations Operating temperature range is -30 to +100°C The PPA design has an improved profile of the runner surface which gives a better stress distribution, also under misaligned conditions The PPA design has a crowned running surface Supplied with grease nipples Lubrication can be done at the Head or thread end, except KR 16 & 19 which can only be lubricated at the head
New items
LM29749/710, SKF

LM29749/710, SKF

Imperial Single row, roller taper bearings suitable for heavy radial loads and axial loads in a single direction. Usually mounted in pairs they are used in a variety of applications including, gearboxes, shafts and motors. SKF’s imperial tapered roller bearings offer engineers many advantages over more conventional roller bearings. Maintaining a lubricant film between bearing flange and roller reduces friction, heat and wear extending working life and reducing noise. Running in periods are reduced due to a design that significantly reduces friction and wear. Rollers and raceways are engineered using very precise tolerances ensuring optimal load distribution and minimal noise and vibration. Crowned raceways help reduce stress at the roller ends extending the bearing lifespan under heavy loads or misalignment.
New items
TIH 100M/MV, SKF

TIH 100M/MV, SKF

The SKF TIH 100M/MV has high standards of efficiency and performance as the small heater combined with increased capacity. The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase. It is suitable for most bearing heating applications Capable of heating a 97 kg (213 lb) bearing in less than 20 minutes Induction coil located outside the heater’s housing enables a shorter heating time and lower energy consumption Integrated carrying handles allow for easy movement of the heater in the workshop
New items
FNL 509 A, SKF

FNL 509 A, SKF

The SKF FNL bearing housing, together with appropriate Sky bearings constitute economic, interchangeable bearing units that meet the demand for designs that are easy to maintain. Large Assortment Of Design And Sizes High Quality Of Bearing Housings Design And Manufacturing Worldwide Availability
New items
F2BC 40M-CPSS-DFH, SKF

F2BC 40M-CPSS-DFH, SKF

The SKF oval flanged ball bearing unit which is consist of an insert bearing mounted in a housing. The insert bearings is based on sealed deep groove ball bearings in the 62 and 63 series but have a convex outer ring and in most cases an extended inner ring with a specific locking device enabling quick and easy mounting onto the shaft. High quality Used for food and beverage applications
New items
NJ 210 ECJ, SKF

NJ 210 ECJ, SKF

The SKF roller bearing comes with a Metric type measurement system and Normal (Pn) tolerance group. The bearing has 60mm bore diameter, 70mm outside diameter and 28mm of width. Bearing steel bearing material 0° nominal contact angle
New items
NU 2210 ECP/C3, SKF

NU 2210 ECP/C3, SKF

The SKF high-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with cage. It has 50 mm ID and 90 mm OD. Bearing is of bearing steel Cylindrical bore type
New items
NJ 214 ECJ/C3, SKF

NJ 214 ECJ/C3, SKF

The SKF roller bearing comes with a Inch type measurement system and Normal (Pn) tolerance group. The bearing has 90mm bore diameter, 190mm outside diameter and 43mm of width. Bearing steel bearing material 0° nominal contact angle
New items
NJ 207 ECP/C3, SKF

NJ 207 ECP/C3, SKF

The SKF roller bearing comes with a Metric type measurement system and Normal (Pn) tolerance group. The bearing has 40mm bore diameter, 80mm outside diameter and 23mm of width. Bearing steel bearing material 0° nominal contact angle
New items
NJ 2205 ECP/C4, SKF

NJ 2205 ECP/C4, SKF

The SKF roller bearing comes with a Inch type measurement system and Normal (Pn) tolerance group. The bearing has 60mm bore diameter, 130mm outside diameter and 31mm of width. Bearing steel bearing material 0° nominal contact angle
New items
NU 215 ECP/C3, SKF

NU 215 ECP/C3, SKF

The SKF high-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with cage. It has 75 mm ID and 130 mm OD. Bearing is of bearing steel Cylindrical bore type
New items
99169, SKF

99169, SKF

SPEEDI-SLEEVE SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation. SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds or inadequate lubrication. Shafts can be up and running within minutes, at a fraction of the cost of traditional reworking. The standard SPEEDI-SLEEVES size range covers shaft diameters from 11.91 to 203.33mm (0.472 to 8 in) Each SPEEDI-SLEEVE, metric or imperial, is designed to fit a specific shaft range, usually above and below the nominal shaft diameter. This permits some flexibility to accommodate variations in the actual shaft size SPEEDI-SLEEVES are made of stainless steel and their extremely thin walls (0.28mm/.011 in.) allow users to retain the original seal size. All SPEEDI-SLEEVES feature a removable installation flange for easy mounting using a tool supplied with each sleeve The flange can be retained or removed (if necessary) for clearance purposes - a pre-cut tear-groove is provided