Featured Products
SharkBite Connector The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes i...
SharkBite Check Valve SharkBite Check Valve as a brass bodied back flow prevention device that protects water from contamination Approvals WRA...
SharkBite Reduced Branch Tee The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PE...
SharkBite Depth marker / Disconnecting Clips SharkBite® Depth marker and Disconnecting Clips in a range of sizes from 10mm to 28mm. Ideal for d...
SharkBite Equal Tee The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes i...
SharKBite 3/4in. MBSP Union - 314 Series Dial-up Pressure Reducing Valve 3/4in. FBSP - 314 Series Dial-up Pressure Reducing Valve - 70ﾟC Dial-u...
SharkBite 1/2in. FBSP - 314 Series Dial-up Pressure Reducing Valve 1/2in. FBSP - 314 Series Dial-up Pressure Reducing Valve - 70ﾟC Dial-up pres...
SharkBite Equal Tee The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes i...
SharkBite 45 Degree Elbows The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX...
SharkBite Quarter Turn Push Fit Ball Valve A brass bodied full flow isolation valve activated by the lever handle Isolates water by turning lev...
SharkBite Pushfit to Female BSP Flexible Connectors The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon ste...
SharkBite Equal Tee The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes i...
Popular Categories For Sharkbite
Popular Items
Popular items
SB114240ME, Sharkbite
SharkBite Connector
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
Tapered Thread
8405920
,
8405923
,
8405927
,
8405936
and
8405939
Parallel Thread
8405942, 8405945, 8405951, 8405964, 8405967, 8405970 and 8405955
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SB2615, Sharkbite
SharkBite Check Valve
SharkBite Check Valve as a brass bodied back flow prevention device that protects water from contamination
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SB03353528E, Sharkbite
SharkBite Reduced Branch Tee
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SB2910, Sharkbite
SharkBite Depth marker / Disconnecting Clips
SharkBite® Depth marker and Disconnecting Clips in a range of sizes from 10mm to 28mm. Ideal for disconnecting fittings from pipes easily and quickly.
Note
Sold individually
SharkBite Push-fit Accessories
"SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C."
Popular items
SB0315-S, Sharkbite
SharkBite Equal Tee
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SBPRED314005, Sharkbite
SharKBite 3/4in. MBSP Union - 314 Series Dial-up Pressure Reducing Valve
3/4in. FBSP - 314 Series Dial-up Pressure Reducing Valve - 70ﾟC
Dial-up pressure reducing valve for domestic use
One piece, easy to replace cartridge that contains all the working components
Suitable for hot and cold water applications for installation flexibility
Easy to read pressure indicator dial
Integral strainer to protect the cartridge and the installation
MBSP connection complete with union fitting for ease of servicing
Can be installed in any orientation
Gauge connection: 1/4in. FBSP
Pressure range: 1.0 - 6.0 bar
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SBPRED314001, Sharkbite
SharkBite 1/2in. FBSP - 314 Series Dial-up Pressure Reducing Valve
1/2in. FBSP - 314 Series Dial-up Pressure Reducing Valve - 70ﾟC
Dial-up pressure reducing valve for domestic use
One piece, easy to replace cartridge that contains all the working components
Suitable for hot and cold water applications for installation flexibility
Easy to read pressure indicator dial
Integral strainer to protect the cartridge and the installation
MBSP connection complete with union fitting for ease of servicing
Can be installed in any orientation
Connection: 1/2in. FBSP
Gauge connection: 1/4in. FBSP
Pressure range: 1.0 - 6.0 bar
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SB0310-S, Sharkbite
SharkBite Equal Tee
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SB0535E, Sharkbite
SharkBite 45 Degree Elbows
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The fitting bodies are manufactured from robust ultra low lead DZR brass
Joins two pieces of pipe to form a 45 degree bend
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SB2742E, Sharkbite
SharkBite Quarter Turn Push Fit Ball Valve
A brass bodied full flow isolation valve activated by the lever handle
Isolates water by turning lever handle
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SB232230020F, Sharkbite
SharkBite Pushfit to Female BSP Flexible Connectors
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
Potable water applications
Vented and unvented hot water systems
Pressurised, vented and sealed central heating systems
Hot and cold water services
Heating and chilled water applications
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Popular items
SB0342E, Sharkbite
SharkBite Equal Tee
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New Items
New items
SB114240ME, Sharkbite
SharkBite Connector
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
Tapered Thread
8405920
,
8405923
,
8405927
,
8405936
and
8405939
Parallel Thread
8405942, 8405945, 8405951, 8405964, 8405967, 8405970 and 8405955
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SB2615, Sharkbite
SharkBite Check Valve
SharkBite Check Valve as a brass bodied back flow prevention device that protects water from contamination
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SB03353528E, Sharkbite
SharkBite Reduced Branch Tee
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SB2910, Sharkbite
SharkBite Depth marker / Disconnecting Clips
SharkBite® Depth marker and Disconnecting Clips in a range of sizes from 10mm to 28mm. Ideal for disconnecting fittings from pipes easily and quickly.
Note
Sold individually
SharkBite Push-fit Accessories
"SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C."
New items
SB0315-S, Sharkbite
SharkBite Equal Tee
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SBPRED314005, Sharkbite
SharKBite 3/4in. MBSP Union - 314 Series Dial-up Pressure Reducing Valve
3/4in. FBSP - 314 Series Dial-up Pressure Reducing Valve - 70ﾟC
Dial-up pressure reducing valve for domestic use
One piece, easy to replace cartridge that contains all the working components
Suitable for hot and cold water applications for installation flexibility
Easy to read pressure indicator dial
Integral strainer to protect the cartridge and the installation
MBSP connection complete with union fitting for ease of servicing
Can be installed in any orientation
Gauge connection: 1/4in. FBSP
Pressure range: 1.0 - 6.0 bar
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SBPRED314001, Sharkbite
SharkBite 1/2in. FBSP - 314 Series Dial-up Pressure Reducing Valve
1/2in. FBSP - 314 Series Dial-up Pressure Reducing Valve - 70ﾟC
Dial-up pressure reducing valve for domestic use
One piece, easy to replace cartridge that contains all the working components
Suitable for hot and cold water applications for installation flexibility
Easy to read pressure indicator dial
Integral strainer to protect the cartridge and the installation
MBSP connection complete with union fitting for ease of servicing
Can be installed in any orientation
Connection: 1/2in. FBSP
Gauge connection: 1/4in. FBSP
Pressure range: 1.0 - 6.0 bar
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SB0310-S, Sharkbite
SharkBite Equal Tee
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SB0535E, Sharkbite
SharkBite 45 Degree Elbows
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The fitting bodies are manufactured from robust ultra low lead DZR brass
Joins two pieces of pipe to form a 45 degree bend
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SB2742E, Sharkbite
SharkBite Quarter Turn Push Fit Ball Valve
A brass bodied full flow isolation valve activated by the lever handle
Isolates water by turning lever handle
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SB232230020F, Sharkbite
SharkBite Pushfit to Female BSP Flexible Connectors
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
Potable water applications
Vented and unvented hot water systems
Pressurised, vented and sealed central heating systems
Hot and cold water services
Heating and chilled water applications
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
New items
SB0342E, Sharkbite
SharkBite Equal Tee
The SharkBite Push-Fit Solution is a quick and reliable method of joining copper, carbon steel, polybutylene and PEX pipes in any combination, without the requirement for heavy and expensive tools or obtaining hot work permits for soldering joints
The toothed grab ring is manufactured from 316 Stainless Steel which provides the firm bite that ensures the strongest of joints is made. The EPDM rubber o-ring (Ethylene Propylene Diene Monomer), provides a long lasting and secure seal. The cartridge ring is manufactured from 304 stainless steel to provide guaranteed electrical continuity
Note
All fittings are rated to 10 bar at 120ﾟC, WRAS approved and certified by many other international approval bodies
Approvals
WRAS, DVGW, IAB
SharkBite Push-Fit Fittings
SharkBite®, a versatile range of push-fit fittings that are secure, watertight and easy to fit. Originally launched in Australia in 1998 these fittings have seen a massive increase in popularity both in the UK and America and are steadily becoming a popular brand of push-fit fittings in the rest of the world.
Capable of joining copper, PEX, Polybutylene and carbon steel pipework, all fittings are secure, reliable and re-usable and demonstrate easy installation every time.
The fittings are available in 7 popular sizes from 10mm to 54mm, manufactured from ultra low lead DZR brass and pressure rated to 10 bar at 120°C.
Don’t hesitate to ask questions for better clarification.