Featured Products
Grove - Temperature Sensor uses a thermistor to measure ambient temperature. The resistance of thermistor changes based on ambient temperature. T...
LED Matrix is low cost and usually used to display simple numbers and images. Grove - Red LED Matrix w/Driver is the combination of the 20mm 88 s...
The Seeed Studio ODYSSEY -STM32MP157C is a single board computer that is based on STM32MP157C, a dual-core Arm Cortex-A7 processor operating at 6...
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and othe...
The Seeed Studio SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway connected to the Helium LongFi Network. This SenseCAP M1 i...
Popular Categories For Seeed Studio
Categories For Seeed Studio
Popular Items
Popular items
Popular items
Popular items
Popular items
Popular items
Popular items
101020078, Seeed Studio
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply.
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply.
Features
Low power consumption
High sensitivity
Tiny outline
Responsive to a wide scope of target gases
Cost efficient
Durable
Compatible with 5V and 3.3V
Popular items
101020015, Seeed Studio
Grove - Temperature Sensor uses a thermistor to measure ambient temperature. The resistance of thermistor changes based on ambient temperature. This resistance value alters the output of a voltage divider which is measured by an analog input pin and converted to a temperature value. The operating range is -40 to 125°C , with an accuracy of 1.5°C .
Popular items
104020089, Seeed Studio
LED Matrix is low cost and usually used to display simple numbers and images. Grove - Red LED Matrix w/Driver is the combination of the 20mm 88 square LED Matrix - Red and the Grove - LED Matrix Driver. The HT16K33 is a memory mapping and multi-function LED controller driver which allows you to control the LED matrix with our prepared and easy-to-use libraries, or you can create your own library to control it to satisfy your needs.
Integrated RC oscillator
R/W address auto increment
Max. 8 x 8 patterns
I2C-bus interface
Typical Applications
Industrial control indicators
Digital clocks, thermometers, counters, multimeters
Combo sets
VCR sets
Instrumentation readouts
Other consumer applications
LED Displays
Popular items
102110319, Seeed Studio
The Seeed Studio ODYSSEY -STM32MP157C is a single board computer that is based on STM32MP157C, a dual-core Arm Cortex-A7 processor operating at 650Mhz. The processor also integrates an Arm Cortex-M4 coprocessor, which makes it suitable for real-time tasks.
Compact Size and Powerful
Open-Source Hardware/SDK/API/BSP/OS
Popular items
Popular items
Popular items
110991633, Seeed Studio
The Seeed Studio SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway connected to the Helium LongFi Network. This SenseCAP M1 is the EU 868 version with CE/FCC certificates. It is based on Raspberry Pi 4 and embedded with a LoRa concentrator. It provides built-in BLE, which helps to set up the device in a few simple steps, and it supports connecting to the internet via Wi-Fi or Ethernet.
Handy setup to helium network
Powered by mature hardware solutions
Secured and Reliable
Automatic online upgrades
Remote Diagnosis
64GB large storage
Efficient cooling solution
Multiple accessories
FCC and CE certificated
New Items
New items
New items
101020015, Seeed Studio
Grove - Temperature Sensor uses a thermistor to measure ambient temperature. The resistance of thermistor changes based on ambient temperature. This resistance value alters the output of a voltage divider which is measured by an analog input pin and converted to a temperature value. The operating range is -40 to 125°C , with an accuracy of 1.5°C .
New items
104020089, Seeed Studio
LED Matrix is low cost and usually used to display simple numbers and images. Grove - Red LED Matrix w/Driver is the combination of the 20mm 88 square LED Matrix - Red and the Grove - LED Matrix Driver. The HT16K33 is a memory mapping and multi-function LED controller driver which allows you to control the LED matrix with our prepared and easy-to-use libraries, or you can create your own library to control it to satisfy your needs.
Integrated RC oscillator
R/W address auto increment
Max. 8 x 8 patterns
I2C-bus interface
Typical Applications
Industrial control indicators
Digital clocks, thermometers, counters, multimeters
Combo sets
VCR sets
Instrumentation readouts
Other consumer applications
LED Displays
New items
102110319, Seeed Studio
The Seeed Studio ODYSSEY -STM32MP157C is a single board computer that is based on STM32MP157C, a dual-core Arm Cortex-A7 processor operating at 650Mhz. The processor also integrates an Arm Cortex-M4 coprocessor, which makes it suitable for real-time tasks.
Compact Size and Powerful
Open-Source Hardware/SDK/API/BSP/OS
New items
New items
101020078, Seeed Studio
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply.
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply.
Features
Low power consumption
High sensitivity
Tiny outline
Responsive to a wide scope of target gases
Cost efficient
Durable
Compatible with 5V and 3.3V
New items
New items
New items
New items
New items
New items
110991633, Seeed Studio
The Seeed Studio SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway connected to the Helium LongFi Network. This SenseCAP M1 is the EU 868 version with CE/FCC certificates. It is based on Raspberry Pi 4 and embedded with a LoRa concentrator. It provides built-in BLE, which helps to set up the device in a few simple steps, and it supports connecting to the internet via Wi-Fi or Ethernet.
Handy setup to helium network
Powered by mature hardware solutions
Secured and Reliable
Automatic online upgrades
Remote Diagnosis
64GB large storage
Efficient cooling solution
Multiple accessories
FCC and CE certificated
Don’t hesitate to ask questions for better clarification.