Featured Products
Our DC cooling fans have features such as high airflow, high reliability, and low noise. They can be used in a wide-ranging applications includin...
DC Cooling fans feature high air flow, high reliability and low noise.Suitable for servers,communicationsequipment and more...
Sanyo Denki 2H42 Series Stepper Motors Sanyo Denki range of 2H42 series Stepper Motors providing the user with a co...
DC Cooling fans feature high air flow, high reliability and low noise.Suitable for servers,communicationsequipment and more...
The Sanyo Denki dual shaft, bipolar, 2-phase stepping motor. In comparison to previous models holding torque has been increased approximately by...
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 1.4Nm holding torque at 2-phase excitation and 3A current r...
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 2.35 Nm holding torque at 2-phase excitation and 4A current...
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 2.5Nm holding torque at 2-phase excitation and 2A current r...
The Sanyo Denki 9AD type ACDC fan with rated speed of 3800 rpm is most sought after product. This model have pulse sensors with PWM control funct...
The Sanyo Denki DC fan have ribs and pulse sensors with PWM control function is most sought after product. Compared to other models noise level h...
Popular Categories For Sanyo Denki
Categories For Sanyo Denki
Popular Items
Popular items
109R0824G4021, Sanyo Denki
Our DC cooling fans have features such as high airflow, high reliability, and low noise. They can be used in a wide-ranging applications including servers and ICT equipment.
Popular items
9GV1248P4G011, Sanyo Denki
DC Cooling fans feature high air flow, high reliability and low noise.Suitable for servers,communicationsequipment and more
Installing self-tapping screws into the plastic frame of the fan may split or deform it. If using self-tapping screws, use screws that are recommended by our company, and refer to our recommended tightening torques and recommended pilot hole shapes. Pay close attention to the operating precautions and fully understand your equipment before you use it
Popular items
Popular items
2H4233B05S340, Sanyo Denki
Sanyo Denki 2H42 Series Stepper Motors
Sanyo Denki range of 2H42 series Stepper Motors providing the user with a comprehensive range of options to ensure that your application is covered. These 42 mm Sq. stepper motors are lead wire and connector type and are available with a step angle from 0.9° to 1.8°
Offered in both Unipolar & Bipolar winding options
Single round and double round shaft designs with adequate length providing the user with a simple mounting solution
Leaded options also available
Sanyo Denki Stepper Motor
Popular items
Popular items
9GV0624P1G03, Sanyo Denki
DC Cooling fans feature high air flow, high reliability and low noise.Suitable for servers,communicationsequipment and more
Installing self-tapping screws into the plastic frame of the fan may split or deform it. If using self-tapping screws, use screws that are recommended by our company, and refer to our recommended tightening torques and recommended pilot hole shapes. Pay close attention to the operating precautions and fully understand your equipment before you use it
Popular items
SF2421-10B11, Sanyo Denki
The Sanyo Denki dual shaft, bipolar, 2-phase stepping motor. In comparison to previous models holding torque has been increased approximately by 10%, have noise levels reduced approximately 3 dB(A) lower and motor efficiency has been improved by 2.4%. This contributes to reduction in power consumption of devices and the motor's heat dissipation.
Dual shaft, bi-polar with motor flange size of 42 mm sq
Motor length of 33mm and a DC input
Operating temperature range is -10°C to 50°C
Allowable radial load is 10 N
Allowable thrust load is 20 N
Reduced noise levels by 3 dB
Popular items
SM2562C30B41, Sanyo Denki
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 1.4Nm holding torque at 2-phase excitation and 3A current rating. Compared to our conventional model, torque performance has improved by approximately 40%. This contributes to shortening the positioning time and machine cycle time. It is used in medical devices, industrial equipment, semiconductor manufacturing equipment, conveying machines, and index table driving.
Low noised
Energy saving
56 mm flange size
Popular items
SM2563C40B41, Sanyo Denki
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 2.35 Nm holding torque at 2-phase excitation and 4A current rating. Compared to our conventional model, torque performance has improved by approximately 40%. This contributes to shortening the positioning time and machine cycle time. It is used in medical devices, industrial equipment, semiconductor manufacturing equipment, conveying machines, and index table driving.
Low noised
Energy saving
56 mm flange size
Popular items
SM2564C20B41, Sanyo Denki
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 2.5Nm holding torque at 2-phase excitation and 2A current rating. Compared to our conventional model, torque performance has improved by approximately 40%. This contributes to shortening the positioning time and machine cycle time. It is used in medical devices, industrial equipment, semiconductor manufacturing equipment, conveying machines, and index table driving.
Low noised
Energy saving
56 mm flange size
Popular items
9ADW5701P5H003, Sanyo Denki
The Sanyo Denki 9AD type ACDC fan with rated speed of 3800 rpm is most sought after product. This model have pulse sensors with PWM control function. Frame thickness is 51 mm and frame material is aluminium. These fan have an input voltage range of 100 to 240 VAC, supporting both 100 and 200 VAC systems. Power consumption has been reduced by approximately 32% compared with the current model. Also, the PWM control function enables the control of fan speed, contributing to lowering noise and improving energy efficiency of devices. These fan deliver a maximum airflow of 6.7 m3/min and a maximum static pressure of 195 Pa. Dimensions of this fan is 172
´
150
´
51 mm. Water and dust protection ensures stable fan operation even in harsh environments. Frame material is plastic. Operating temperature -20 to +70 ˚C.
RoHS directive
High airflow and high static pressure
Low power consumption
Wide O\operating voltage range
Water and dust protection
Splash proof
Popular items
9RA0924P4G001, Sanyo Denki
The Sanyo Denki DC fan have ribs and pulse sensors with PWM control function is most sought after product. Compared to other models noise level has been halved and power consumption has been reduced by 26%. Moreover, the models with PWM control, which enables the control of fan speed, provide further optimized noise level and efficiency. This fan lasts 1.5 times longer than the current model, (1) and is capable of continuous operation for 60, 000 hours, improving the maintainability. The product line up is available in a wide variety in voltage, cooling performance, noise level, and PWM control. This allows users to choose the most suitable one for their applications. Operating voltage range for this product is 21.6 to 26.4 V. Frame material is plastic. Operating temperature -20 to +70 ˚C. Dimensions of this fan is 92
´
92
´
25 mm.
Low noise and energy saving
Long life
Rich line up
Eco product
New Items
New items
109R0824G4021, Sanyo Denki
Our DC cooling fans have features such as high airflow, high reliability, and low noise. They can be used in a wide-ranging applications including servers and ICT equipment.
New items
9GV1248P4G011, Sanyo Denki
DC Cooling fans feature high air flow, high reliability and low noise.Suitable for servers,communicationsequipment and more
Installing self-tapping screws into the plastic frame of the fan may split or deform it. If using self-tapping screws, use screws that are recommended by our company, and refer to our recommended tightening torques and recommended pilot hole shapes. Pay close attention to the operating precautions and fully understand your equipment before you use it
New items
New items
103H7823-5740, Sanyo Denki
Sanyo Denki 103H7 Series Stepper Motor
Sany Denki range of 103H7 Stepper Motors providing the user with a comprehensive range of options to ensure your application is covered.
Offered in both Unipolar & Bipolar winding options
Single round and double round shaft designs with adequate length providing the user with a simple mounting solution
Leaded options also available
Sanyo Denki Stepper Motor
New items
9GA0612P1K60, Sanyo Denki
San Ace Low Power DC Fans - GA Series
San Ace GA series low power DC fans are a highly power efficient solution to a range of fan requirements. Featuring high air flow, high static pressure and low noise.
Low power high performance fans offering 15% to 38% energy saving over conventional fans
Improved impeller, guided vanes, reduced mass, reduced noise by between 2dB and 6dB
PWM control to further optimise power consumption and noise level (except 60 x 60 x10 mm frame size which have tachometer output only)
High static pressure and high airflow
Static pressure optimised at inflection point where fan operated for high impedance applications
30,000 to 60,000 hour life fans @ 60 Degree C
Permanently lubricated dual ball bearing system
New items
9HV5748P5G001, Sanyo Denki
San Ace High Static Pressure DC Fans - HV Series
Sanyo Denki San Ace high performance fans. The HV series are designed to offer higher static pressure and less power consumption than current devices. Lower power consumption helps to reduce running costs and with a high mechanical life these units also reduce maintenance costs.
When To Use High Static Pressure Fans
A high static pressure fan has blades optimised for minimising airflow loss when there is a build-up of pressure close to the fan. For instance, in a computer enclosure with hard drives positioned close to the fan a High Airflow fan would not operate to its full potential. In contrast a High Pressure fan would not be effected to the same degree. In the same way on an output where there is no resistance before or after the fan it would be best to use a High Airflow fan as these channel air outwards more efficiently.
Potential Applications
Servers, data storage systems, optical amplifiers, industrial inverters and switching power supplies along with many other IT, telecommunication and industrial applications.
Features
High static pressure
Energy saving
Low noise
PWM speed control function
Wide selection of sizes and voltages
High expected lifetime
New items
SF2421-10B11, Sanyo Denki
The Sanyo Denki dual shaft, bipolar, 2-phase stepping motor. In comparison to previous models holding torque has been increased approximately by 10%, have noise levels reduced approximately 3 dB(A) lower and motor efficiency has been improved by 2.4%. This contributes to reduction in power consumption of devices and the motor's heat dissipation.
Dual shaft, bi-polar with motor flange size of 42 mm sq
Motor length of 33mm and a DC input
Operating temperature range is -10°C to 50°C
Allowable radial load is 10 N
Allowable thrust load is 20 N
Reduced noise levels by 3 dB
New items
SM2562C30B41, Sanyo Denki
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 1.4Nm holding torque at 2-phase excitation and 3A current rating. Compared to our conventional model, torque performance has improved by approximately 40%. This contributes to shortening the positioning time and machine cycle time. It is used in medical devices, industrial equipment, semiconductor manufacturing equipment, conveying machines, and index table driving.
Low noised
Energy saving
56 mm flange size
New items
SM2563C40B41, Sanyo Denki
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 2.35 Nm holding torque at 2-phase excitation and 4A current rating. Compared to our conventional model, torque performance has improved by approximately 40%. This contributes to shortening the positioning time and machine cycle time. It is used in medical devices, industrial equipment, semiconductor manufacturing equipment, conveying machines, and index table driving.
Low noised
Energy saving
56 mm flange size
New items
SM2564C20B41, Sanyo Denki
The Sanyo Denki 2 phase stepper motor with single shaft has bipolar winding, provides 2.5Nm holding torque at 2-phase excitation and 2A current rating. Compared to our conventional model, torque performance has improved by approximately 40%. This contributes to shortening the positioning time and machine cycle time. It is used in medical devices, industrial equipment, semiconductor manufacturing equipment, conveying machines, and index table driving.
Low noised
Energy saving
56 mm flange size
New items
9ADW5701P5H003, Sanyo Denki
The Sanyo Denki 9AD type ACDC fan with rated speed of 3800 rpm is most sought after product. This model have pulse sensors with PWM control function. Frame thickness is 51 mm and frame material is aluminium. These fan have an input voltage range of 100 to 240 VAC, supporting both 100 and 200 VAC systems. Power consumption has been reduced by approximately 32% compared with the current model. Also, the PWM control function enables the control of fan speed, contributing to lowering noise and improving energy efficiency of devices. These fan deliver a maximum airflow of 6.7 m3/min and a maximum static pressure of 195 Pa. Dimensions of this fan is 172
´
150
´
51 mm. Water and dust protection ensures stable fan operation even in harsh environments. Frame material is plastic. Operating temperature -20 to +70 ˚C.
RoHS directive
High airflow and high static pressure
Low power consumption
Wide O\operating voltage range
Water and dust protection
Splash proof
New items
9RA0924P4G001, Sanyo Denki
The Sanyo Denki DC fan have ribs and pulse sensors with PWM control function is most sought after product. Compared to other models noise level has been halved and power consumption has been reduced by 26%. Moreover, the models with PWM control, which enables the control of fan speed, provide further optimized noise level and efficiency. This fan lasts 1.5 times longer than the current model, (1) and is capable of continuous operation for 60, 000 hours, improving the maintainability. The product line up is available in a wide variety in voltage, cooling performance, noise level, and PWM control. This allows users to choose the most suitable one for their applications. Operating voltage range for this product is 21.6 to 26.4 V. Frame material is plastic. Operating temperature -20 to +70 ˚C. Dimensions of this fan is 92
´
92
´
25 mm.
Low noise and energy saving
Long life
Rich line up
Eco product
Don’t hesitate to ask questions for better clarification.