Featured Products
The Red Pitaya STEMlab 125-14 low noise is a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies...
Sensor Extension Module for STEMLAB Sensor extension module is an add-on board that can be plugged in on top of the...
Red Pitaya STEMLab125-14 Starter Kit The STEMLab 125-14 Starter kit consists of the following Red Pitaya hardware a...
Red Pitaya STEMLab125-14 Calibrated Diagnostic Kit The STEMLab 125-14 Calibrated kit is the same as the 125-14 Ulti...
Red Pitaya V1.1 Diagnostic Kit Red Pitaya is an open-source measurement and control tool designed as a single unit...
The Red Pitaya STEMlab 125-14 low noise is a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies...
Shielding Aluminium Case for Red Pitaya STEMLab The ALU case is the best option to protect your Red Pitaya STEMlab....
Diagnostic Accessories Kit for Red Pitaya STEMLab Red Pitaya diagnostic accessories kit consisting of the following...
Red Pitaya Clear Case Red Pitaya Enclosure Plexi V1.1 is a clear case. For use with Red Pitaya Open Source...
Red Pitaya STEMLab 125-10 Starter Kit The STEMLab 125-10 Starter kit consists of the following Red Pitaya hardware...
The Red Pitaya SIGNALLAB oscilloscope kit has 4 channels out of which 2 are inputs and 2 are outputs. The kit includes Red Pitaya SIGNALlab 250-1...
Red Pitaya STEMLab125-14 Diagnostic Kit The STEMLab 125-14 Diagnostic kit consists of the following Red Pitaya hard...
Popular Categories For Red Pitaya
Popular Items
Popular items
IZD0030, Red Pitaya
The Red Pitaya STEMlab 125-14 low noise is a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies to reduce RF input and output noise and consequently increase ENOB.
Dual-Core ARM Cortex-A9 MPCore processor
512MB (4Gb) RAM
Popular items
045, Red Pitaya
Sensor Extension Module for STEMLAB
Sensor extension module is an add-on board that can be plugged in on top of the STEMlab board to broaden its uses and capabilities.
When STEMlab is used together with this sensor extension module the user is also able to connect many sensors and actuators that enables out of the box functionality. You can measure temperature, moisture, alcohol, water level, vibrations, UV light, sound, pressure, air quality detect motion. Also you can control things like LEDs, displays, motors, relays that are able to control high load devices. The sensor extension module is ideal for both newcomers to help them learn how to program and for developers to manufacture their new ideas quickly.
Contents
Sensor extension module (1pc), Jupyter programming
Popular items
028, Red Pitaya
Red Pitaya STEMLab125-14 Starter Kit
The STEMLab 125-14 Starter kit consists of the following Red Pitaya hardware and functionality, all ready to go:
Test & Measurement Instruments
Oscilloscope
Signal generator
Spectrum analyser
Bode analyser
Access to the Red Pitaya marketplace which is a place where free of charge open source applications developed by red Pitaya community members are available within a single click for immediate experience and use
Development & Learning Tools / Features
MATLAB / LABVIEW remote control
Possibility to create own app (open source code available)
Accessories
SD card
Power supply
Ethernet cable
Other
Compliance, CE, FCC
Red Pitaya Hardware
Red Pitaya STEMLab 14 board
Connectivity (ethernet, Wi-Fi)
Red Pitaya PC Based Instruments
Popular items
041, Red Pitaya
Red Pitaya STEMLab125-14 Calibrated Diagnostic Kit
The STEMLab 125-14 Calibrated kit is the same as the 125-14 Ultimate kit but does not include the LCR meter. The Calibrated kit consists of the following Red Pitaya hardware and functionality, all ready to go:
Test & Measurement Instruments
Oscilloscope
Signal generator
Spectrum analyser
Bode analyser
Logic analyser pro
Access to the Red Pitaya marketplace which is a place where free of charge open source applications developed by red Pitaya community members are available within a single click for immediate experience and use
Development & Learning Tools / Features
MATLAB / LABVIEW remote control
Possibility to create own app (open source code available)
Accessories
SD card
Power supply
Ethernet cable
2 x oscilloscope probes
2 x SMA to BNC adapters
2 x 50 ohm termination
2 x SMA T adapters
Wi-Fi dongle
Aluminium case
Other
Calibrated
Compliance, CE, FCC
Red Pitaya Hardware
Red Pitaya STEMLab 14 board
Connectivity (ethernet, Wi-Fi)
Red Pitaya PC Based Instruments
Popular items
Red Pitaya Diagnostic Kit, Red Pitaya
Red Pitaya V1.1 Diagnostic Kit
Red Pitaya is an open-source measurement and control tool designed as a single unit, the size of a credit card. It can replace many expensive laboratory instruments. It is renowned for unleashing the creativity of its users, making it an instrument of choice for industry professionals, research workers, teachers and students.
Kit comprises open source instrument (800-7403) 2 probes (729-6649) 2 adapters (761-9985) micro USB power supply adapter (765-3311) 4 GB secure digital card (695-7321) enclosure (819-4077).
Kit Contents
Open source instrument (800-7403)
2 x probes (729-6649)
2 x adapters (761-9985)
micro USB power supply adapter (765-3311)
4 GB secure digital card (695-7321) Enclosure (819-4077).
Red Pitaya PC Based Instruments
Popular items
IZD0031, Red Pitaya
The Red Pitaya STEMlab 125-14 low noise is a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies to reduce RF input and output noise and consequently increase ENOB.
Dual-Core ARM Cortex-A9 MPCore processor
512MB (4Gb) RAM
Popular items
024, Red Pitaya
Shielding Aluminium Case for Red Pitaya STEMLab
The ALU case is the best option to protect your Red Pitaya STEMlab. Strong aluminium construction protects your board very well against mechanical, environmental, and electromagnetic (EMI) effects.
On the left-hand side of the ALU case you will find all the important holes for connectors.
Supplied with
4 Screws, 4 rubber pads to secure the Red Pitaya positioning on the desk, a thermal pad, and a transparent light tube.
Red Pitaya PC Based Instruments
Popular items
044, Red Pitaya
Diagnostic Accessories Kit for Red Pitaya STEMLab
Red Pitaya diagnostic accessories kit consisting of the following:
2 x osciloscope probes
2 x SMA to BCN adapters
2 x 50 ohm terminations
2 x SMA T adapters
WIFI dongle
Red Pitaya PC Based Instruments
Popular items
1600 0715 001, Red Pitaya
Red Pitaya Clear Case
Red Pitaya Enclosure Plexi V1.1 is a clear case. For use with Red Pitaya Open Source Instrument. All connectors are accessible from the outside.
Being several instruments in one small unit, PC-based oscilloscopes are lighter and more portable than traditional test equipment. A field engineer can thereby carry a complete electronics lab loaded onto a notebook computer.
PC Based Instruments
Compact and portable
Can provide a large and detailed colour display on your PC monitor
Simultaneous views of scope, spectrum analyser and meter modes
Analogue intensity and digital colour display modes
Signal storage is limited only by the PC's memory
Popular items
022, Red Pitaya
Red Pitaya STEMLab 125-10 Starter Kit
The STEMLab 125-10 Starter kit consists of the following Red Pitaya hardware and functionality, all ready to go:
Test & Measurement Instruments
Oscilloscope
Signal generator
Spectrum analyser
Bode analyser
Access to the Red Pitaya marketplace which is a place where free of charge open source applications developed by red Pitaya community members are available within a single click for immediate experience and use
Development & Learning Tools / Features
MATLAB / LABVIEW remote control
Possibility to create own app (open source code available)
Accessories
SD card
Power supply
Ethernet cable
Other
Compliance, CE, FCC
Red Pitaya Hardware
Red Pitaya STEMLab 10 board
Connectivity (ethernet, Wi-Fi)
Red Pitaya PC Based Instruments
Popular items
IZD0024, Red Pitaya
The Red Pitaya SIGNALLAB oscilloscope kit has 4 channels out of which 2 are inputs and 2 are outputs. The kit includes Red Pitaya SIGNALlab 250-12 board in Aluminium Housing, oscilloscope probes, SD card, power supply, USB-A to USB-C and Ethernet cables. The various supported features include spectrum analyser, network manager, logic analyser, data streaming application among others along with Labview, Python, Matlab and C API.
Web application for a GUI that is accessible through Ethernet or Wi-Fi
Linux operating system bootable through SD card
A/D converter resolution of 12 bits
Popular items
029, Red Pitaya
Red Pitaya STEMLab125-14 Diagnostic Kit
The STEMLab 125-14 Diagnostic kit consists of the following Red Pitaya hardware and functionality, all ready to go:
Test & Measurement Instruments
Oscilloscope
Signal generator
Spectrum analyser
Bode analyser
Logic analyser basic
Access to the Red Pitaya marketplace which is a place where free of charge open source applications developed by red Pitaya community members are available within a single click for immediate experience and use
Development & Learning Tools / Features
MATLAB / LABVIEW remote control
Possibility to create own app (open source code available)
Accessories
SD card
Power supply
Ethernet cable
2 x oscilloscope probes
2 x SMA to BNC adapters
2 x 50 ohm termination
2 x SMA T adapters
Wi-Fi dongle
Other
Compliance, CE, FCC
Red Pitaya Hardware
Red Pitaya STEMLab 14 board
Connectivity (ethernet, Wi-Fi)
Red Pitaya PC Based Instruments
New Items
New items
IZD0030, Red Pitaya
The Red Pitaya STEMlab 125-14 low noise is a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies to reduce RF input and output noise and consequently increase ENOB.
Dual-Core ARM Cortex-A9 MPCore processor
512MB (4Gb) RAM
New items
028, Red Pitaya
Red Pitaya STEMLab125-14 Starter Kit
The STEMLab 125-14 Starter kit consists of the following Red Pitaya hardware and functionality, all ready to go:
Test & Measurement Instruments
Oscilloscope
Signal generator
Spectrum analyser
Bode analyser
Access to the Red Pitaya marketplace which is a place where free of charge open source applications developed by red Pitaya community members are available within a single click for immediate experience and use
Development & Learning Tools / Features
MATLAB / LABVIEW remote control
Possibility to create own app (open source code available)
Accessories
SD card
Power supply
Ethernet cable
Other
Compliance, CE, FCC
Red Pitaya Hardware
Red Pitaya STEMLab 14 board
Connectivity (ethernet, Wi-Fi)
Red Pitaya PC Based Instruments
New items
045, Red Pitaya
Sensor Extension Module for STEMLAB
Sensor extension module is an add-on board that can be plugged in on top of the STEMlab board to broaden its uses and capabilities.
When STEMlab is used together with this sensor extension module the user is also able to connect many sensors and actuators that enables out of the box functionality. You can measure temperature, moisture, alcohol, water level, vibrations, UV light, sound, pressure, air quality detect motion. Also you can control things like LEDs, displays, motors, relays that are able to control high load devices. The sensor extension module is ideal for both newcomers to help them learn how to program and for developers to manufacture their new ideas quickly.
Contents
Sensor extension module (1pc), Jupyter programming
New items
041, Red Pitaya
Red Pitaya STEMLab125-14 Calibrated Diagnostic Kit
The STEMLab 125-14 Calibrated kit is the same as the 125-14 Ultimate kit but does not include the LCR meter. The Calibrated kit consists of the following Red Pitaya hardware and functionality, all ready to go:
Test & Measurement Instruments
Oscilloscope
Signal generator
Spectrum analyser
Bode analyser
Logic analyser pro
Access to the Red Pitaya marketplace which is a place where free of charge open source applications developed by red Pitaya community members are available within a single click for immediate experience and use
Development & Learning Tools / Features
MATLAB / LABVIEW remote control
Possibility to create own app (open source code available)
Accessories
SD card
Power supply
Ethernet cable
2 x oscilloscope probes
2 x SMA to BNC adapters
2 x 50 ohm termination
2 x SMA T adapters
Wi-Fi dongle
Aluminium case
Other
Calibrated
Compliance, CE, FCC
Red Pitaya Hardware
Red Pitaya STEMLab 14 board
Connectivity (ethernet, Wi-Fi)
Red Pitaya PC Based Instruments
New items
Red Pitaya Diagnostic Kit, Red Pitaya
Red Pitaya V1.1 Diagnostic Kit
Red Pitaya is an open-source measurement and control tool designed as a single unit, the size of a credit card. It can replace many expensive laboratory instruments. It is renowned for unleashing the creativity of its users, making it an instrument of choice for industry professionals, research workers, teachers and students.
Kit comprises open source instrument (800-7403) 2 probes (729-6649) 2 adapters (761-9985) micro USB power supply adapter (765-3311) 4 GB secure digital card (695-7321) enclosure (819-4077).
Kit Contents
Open source instrument (800-7403)
2 x probes (729-6649)
2 x adapters (761-9985)
micro USB power supply adapter (765-3311)
4 GB secure digital card (695-7321) Enclosure (819-4077).
Red Pitaya PC Based Instruments
New items
IZD0031, Red Pitaya
The Red Pitaya STEMlab 125-14 low noise is a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies to reduce RF input and output noise and consequently increase ENOB.
Dual-Core ARM Cortex-A9 MPCore processor
512MB (4Gb) RAM
New items
024, Red Pitaya
Shielding Aluminium Case for Red Pitaya STEMLab
The ALU case is the best option to protect your Red Pitaya STEMlab. Strong aluminium construction protects your board very well against mechanical, environmental, and electromagnetic (EMI) effects.
On the left-hand side of the ALU case you will find all the important holes for connectors.
Supplied with
4 Screws, 4 rubber pads to secure the Red Pitaya positioning on the desk, a thermal pad, and a transparent light tube.
Red Pitaya PC Based Instruments
New items
044, Red Pitaya
Diagnostic Accessories Kit for Red Pitaya STEMLab
Red Pitaya diagnostic accessories kit consisting of the following:
2 x osciloscope probes
2 x SMA to BCN adapters
2 x 50 ohm terminations
2 x SMA T adapters
WIFI dongle
Red Pitaya PC Based Instruments
New items
1600 0715 001, Red Pitaya
Red Pitaya Clear Case
Red Pitaya Enclosure Plexi V1.1 is a clear case. For use with Red Pitaya Open Source Instrument. All connectors are accessible from the outside.
Being several instruments in one small unit, PC-based oscilloscopes are lighter and more portable than traditional test equipment. A field engineer can thereby carry a complete electronics lab loaded onto a notebook computer.
PC Based Instruments
Compact and portable
Can provide a large and detailed colour display on your PC monitor
Simultaneous views of scope, spectrum analyser and meter modes
Analogue intensity and digital colour display modes
Signal storage is limited only by the PC's memory
New items
022, Red Pitaya
Red Pitaya STEMLab 125-10 Starter Kit
The STEMLab 125-10 Starter kit consists of the following Red Pitaya hardware and functionality, all ready to go:
Test & Measurement Instruments
Oscilloscope
Signal generator
Spectrum analyser
Bode analyser
Access to the Red Pitaya marketplace which is a place where free of charge open source applications developed by red Pitaya community members are available within a single click for immediate experience and use
Development & Learning Tools / Features
MATLAB / LABVIEW remote control
Possibility to create own app (open source code available)
Accessories
SD card
Power supply
Ethernet cable
Other
Compliance, CE, FCC
Red Pitaya Hardware
Red Pitaya STEMLab 10 board
Connectivity (ethernet, Wi-Fi)
Red Pitaya PC Based Instruments
New items
029, Red Pitaya
Red Pitaya STEMLab125-14 Diagnostic Kit
The STEMLab 125-14 Diagnostic kit consists of the following Red Pitaya hardware and functionality, all ready to go:
Test & Measurement Instruments
Oscilloscope
Signal generator
Spectrum analyser
Bode analyser
Logic analyser basic
Access to the Red Pitaya marketplace which is a place where free of charge open source applications developed by red Pitaya community members are available within a single click for immediate experience and use
Development & Learning Tools / Features
MATLAB / LABVIEW remote control
Possibility to create own app (open source code available)
Accessories
SD card
Power supply
Ethernet cable
2 x oscilloscope probes
2 x SMA to BNC adapters
2 x 50 ohm termination
2 x SMA T adapters
Wi-Fi dongle
Other
Compliance, CE, FCC
Red Pitaya Hardware
Red Pitaya STEMLab 14 board
Connectivity (ethernet, Wi-Fi)
Red Pitaya PC Based Instruments
New items
043, Red Pitaya
Logic Analyser Basic for Red Pitaya STEMLab
The Logic Analyzer Basic application enables the representation of the binary states of digital signals. The Logic Analyzer can both deal with purely binary signals, such as GPIO outputs of the Raspberry Pi or Arduino board, as well as analyze different bus (I2C, SPI, and UART) and decode the transmitted data. All Red Pitaya applications are web-based and do not require the installation of any native software. Users can access them via a web browser using their smartphone, tablet or a PC running any popular operating system (MAC, Linux, Windows, Android, and iOS).
Graphical user interface
The graphical user interface of the Logic Analyzer Basic fits well into the overall design of the Red Pitaya applications providing the same operating concept.
Red Pitaya PC Based Instruments
Don’t hesitate to ask questions for better clarification.